===想确认sql_thread线程是否应用完了io_thread接收到的了relay log，看 Master_Log_File=Relay_Master_Log_File ， Read_Master_Log_Pos=Exec_Master_Log_Pos
Master_Log_File: mysql-bin.000004 #当前的slave已经读取了master的binlog文件--slave I/O thread Read_Master_Log_Pos: 46187589 #当前的slave读取的master binlog---mysql_binlog.000004 位置是46187589--slave I/O thread Relay_Log_File: relaylog.000008 #当前relay文件 Relay_Log_Pos: 46187752 #当前relay文件位置的点relaylog.000008，位置是46187752 Relay_Master_Log_File: mysql-bin.000004 #当前slave的sql线程应用到master的binlog的mysql-bin.000004，位置为下一行的 46187589--slave SQL thread Slave_IO_Running: Yes Slave_SQL_Running: Yes Skip_Counter: 0 Exec_Master_Log_Pos: 46187589 #当前sql_thread线程执行到binlog的位置点，---slave SQL thread Relay_Log_Space: 46187918 #The total combined size of all existing relay log files. 所有存在的relay log文件的总大小 Until_Condition: None
mysql 5.6 官方文档
(Master_Log_file, Read_Master_Log_Pos): Coordinates in the master binary log indicating how far the slave I/O thread has read events from that log.
(Relay_Master_Log_File, Exec_Master_Log_Pos): Coordinates in the master binary log indicating how far the slave SQL thread has executed events received from that log.
(Relay_Log_File, Relay_Log_Pos): Coordinates in the slave relay log indicating how far the slave SQL thread has executed the relay log. These correspond to the preceding coordinates, but are
expressed in slave relay log coordinates rather than master binary log coordinates.
SHOW SLAVE STATUS Syntax This statement provides status information on essential parameters of the slave threads. It requires either the SUPER or REPLICATION CLIENT privilege. If you issue this statement using the mysql client, you can use a G statement terminator rather than a semicolon to obtain a more readable vertical layout:
mysql> SHOW SLAVE STATUSG *************************** 1. row *************************** Slave_IO_State: Waiting for master to send event Master_Host: localhost Master_User: root Master_Port: 13000 Connect_Retry: 60 Master_Log_File: master-bin.000002 Read_Master_Log_Pos: 1307 Relay_Log_File: slave-relay-bin.000003 Relay_Log_Pos: 1508 Relay_Master_Log_File: master-bin.000002 Slave_IO_Running: Yes Slave_SQL_Running: Yes Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 0 Last_Error: Skip_Counter: 0 Exec_Master_Log_Pos: 1307 Relay_Log_Space: 1858 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: 0 Master_SSL_Verify_Server_Cert: No Last_IO_Errno: 0 Last_IO_Error: Last_SQL_Errno: 0 Last_SQL_Error: Replicate_Ignore_Server_Ids: Master_Server_Id: 1 Master_UUID: 3e11fa47-71ca-11e1-9e33-c80aa9429562 Master_Info_File: /var/mysqld.2/data/master.info SQL_Delay: 0 SQL_Remaining_Delay: NULL Slave_SQL_Running_State: Reading event from the relay log Master_Retry_Count: 10 Master_Bind: Last_IO_Error_Timestamp: Last_SQL_Error_Timestamp: Master_SSL_Crl: Master_SSL_Crlpath: Retrieved_Gtid_Set: 3e11fa47-71ca-11e1-9e33-c80aa9429562:1-5 Executed_Gtid_Set: 3e11fa47-71ca-11e1-9e33-c80aa9429562:1-5 Auto_Position: 1
• Slave_IO_State A copy of the State field of the SHOW PROCESSLIST output for the slave I/O thread. This tells you whatthe thread is doing: trying to connect to the master, waiting for events from the master, reconnecting to the master, and so on. For a listing of possible states, see Section 8.14.6, “Replication Slave I/O ThreadStates”. • Master_Host The master host that the slave is connected to. • Master_User The user name of the account used to connect to the master. • Master_Port The port used to connect to the master. • Connect_Retry The number of seconds between connect retries (default 60). This can be set with the CHANGE MASTER TO statement. • Master_Log_File The name of the master binary log file from which the I/O thread is currently reading. • Read_Master_Log_Pos The position in the current master binary log file up to which the I/O thread has read. • Relay_Log_File The name of the relay log file from which the SQL thread is currently reading and executing. • Relay_Log_Pos The position in the current relay log file up to which the SQL thread has read and executed. • Relay_Master_Log_File The name of the master binary log file containing the most recent event executed by the SQL thread. • Slave_IO_Running Whether the I/O thread is started and has connected successfully to the master. Internally, the state of this thread is represented by one of the following three values: • MYSQL_SLAVE_NOT_RUN. The slave I/O thread is not running. For this state, Slave_IO_Running is No. • MYSQL_SLAVE_RUN_NOT_CONNECT. The slave I/O thread is running, but is not connected to a replication master. For this state, Slave_IO_Running is Connecting. • MYSQL_SLAVE_RUN_CONNECT. The slave I/O thread is running, and is connected to a replication master. For this state, Slave_IO_Running is Yes. The value of the Slave_running system status variable corresponds with this value. • Slave_SQL_Running Whether the SQL thread is started. • Replicate_Do_DB, Replicate_Ignore_DB The lists of databases that were specified with the --replicate-do-db and --replicate-ignoredb options, if any. • Replicate_Do_Table, Replicate_Ignore_Table, Replicate_Wild_Do_Table, Replicate_Wild_Ignore_Table The lists of tables that were specified with the --replicate-do-table, --replicate-ignoretable, --replicate-wild-do-table, and --replicate-wild-ignore-table options, if any. • Last_Errno, Last_Error These columns are aliases for Last_SQL_Errno and Last_SQL_Error. Issuing RESET MASTER or RESET SLAVE resets the values shown in these columns. Note When the slave SQL thread receives an error, it reports the error first, then stops the SQL thread. This means that there is a small window of time during which SHOW SLAVE STATUS shows a nonzero value for Last_SQL_Errno even though Slave_SQL_Running still displays Yes. • Skip_Counter The current value of the sql_slave_skip_counter system variable. See Section 13.4.2.4, “SET GLOBAL sql_slave_skip_counter Syntax”. • Exec_Master_Log_Pos The position in the current master binary log file to which the SQL thread has read and executed, marking the start of the next transaction or event to be processed. You can use this value with the CHANGE MASTER TO statement's MASTER_LOG_POS option when starting a new slave from an existing slave, so that the new slave reads from this point. The coordinates given by (Relay_Master_Log_File, Exec_Master_Log_Pos) in the master's binary log correspond to the coordinates given by (Relay_Log_File, Relay_Log_Pos) in the relay log. When using a multithreaded slave (by setting slave_parallel_workers to a nonzero value), the value in this column actually represents a “low-water” mark, before which no uncommitted transactions remain. Because the current implementation allows execution of transactions on different databases in a different order on the slave than on the master, this is not necessarily the position of the most recently executed transaction. • Relay_Log_Space The total combined size of all existing relay log files. • Until_Condition, Until_Log_File, Until_Log_Pos The values specified in the UNTIL clause of the START SLAVE statement. Until_Condition has these values: • None if no UNTIL clause was specified • Master if the slave is reading until a given position in the master's binary log • Relay if the slave is reading until a given position in its relay log • SQL_BEFORE_GTIDS if the slave SQL thread is processing transactions until it has reached the first transaction whose GTID is listed in the gtid_set. • SQL_AFTER_GTIDS if the slave threads are processing all transactions until the last transaction in the gtid_set has been processed by both threads. • SQL_AFTER_MTS_GAPS if a multithreaded slave's SQL threads are running until no more gaps are found in the relay log. Until_Log_File and Until_Log_Pos indicate the log file name and position that define the coordinates at which the SQL thread stops executing. For more information on UNTIL clauses, see Section 13.4.2.5, “START SLAVE Syntax”. • Master_SSL_Allowed, Master_SSL_CA_File, Master_SSL_CA_Path, Master_SSL_Cert, Master_SSL_Cipher, Master_SSL_CRL_File, Master_SSL_CRL_Path, Master_SSL_Key, Master_SSL_Verify_Server_Cert These fields show the SSL parameters used by the slave to connect to the master, if any. Master_SSL_Allowed has these values: • Yes if an SSL connection to the master is permitted • No if an SSL connection to the master is not permitted • Ignored if an SSL connection is permitted but the slave server does not have SSL support enabled The values of the other SSL-related fields correspond to the values of the MASTER_SSL_CA, MASTER_SSL_CAPATH, MASTER_SSL_CERT, MASTER_SSL_CIPHER, MASTER_SSL_CRL, MASTER_SSL_CRLPATH, MASTER_SSL_KEY, and MASTER_SSL_VERIFY_SERVER_CERT options to the CHANGE MASTER TO statement. See Section 13.4.2.1, “CHANGE MASTER TO Syntax”. • Seconds_Behind_Master This field is an indication of how “late” the slave is: • When the slave is actively processing updates, this field shows the difference between the current timestamp on the slave and the original timestamp logged on the master for the event currently being processed on the slave. • When no event is currently being processed on the slave, this value is 0. In essence, this field measures the time difference in seconds between the slave SQL thread and the slave I/O thread. If the network connection between master and slave is fast, the slave I/O thread is very close to the master, so this field is a good approximation of how late the slave SQL thread is compared to the master. If the network is slow, this is not a good approximation; the slave SQL thread may quite often be caught up with the slow-reading slave I/O thread, so Seconds_Behind_Master often shows a value of 0, even if the I/O thread is late compared to the master. In other words, this column is useful only for fast networks. This time difference computation works even if the master and slave do not have identical clock times, provided that the difference, computed when the slave I/O thread starts, remains constant from then on. Any changes—including NTP updates—can lead to clock skews that can make calculation of Seconds_Behind_Master less reliable. In MySQL 5.6.9 and later, this field is NULL (undefined or unknown) if the slave SQL thread is not running, or if the SQL thread has consumed all of the relay log and the slave I/O thread is not running. Previously, this field was NULL if the slave SQL thread or the slave I/O thread was not running or was not connected to the master. (Bug #12946333) For example, if (prior to MySQL 5.6.9) the slave I/O thread was running but was not connected to the master and was sleeping for the number of seconds given by the CHANGE MASTER TO statement or --master-connect-retry option (default 60) before reconnecting, the value was NULL. Now in such cases, the connection to the master is not tested; instead, if the I/O thread is running but the relay log is exhausted, Seconds_Behind_Master is set to 0. The value of Seconds_Behind_Master is based on the timestamps stored in events, which are preserved through replication. This means that if a master M1 is itself a slave of M0, any event from M1's binary log that originates from M0's binary log has M0's timestamp for that event. This enables MySQL to replicate TIMESTAMP successfully. However, the problem for Seconds_Behind_Master is that if M1 also receives direct updates from clients, the Seconds_Behind_Master value randomly fluctuates because sometimes the last event from M1 originates from M0 and sometimes is the result of a direct update on M1. When using a multithreaded slave, you should keep in mind that this value is based on Exec_Master_Log_Pos, and so may not reflect the position of the most recently committed transaction. • Last_IO_Errno, Last_IO_Error The error number and error message of the most recent error that caused the I/O thread to stop. An error number of 0 and message of the empty string mean “no error.” If the Last_IO_Error value is not empty, the error values also appear in the slave's error log. I/O error information includes a timestamp showing when the most recent I/O thread error occurred. This timestamp uses the format YYMMDD HH:MM:SS, and appears in the Last_IO_Error_Timestamp column. Issuing RESET MASTER or RESET SLAVE resets the values shown in these columns. • Last_SQL_Errno, Last_SQL_Error The error number and error message of the most recent error that caused the SQL thread to stop. An error number of 0 and message of the empty string mean “no error.” If the Last_SQL_Error value is not empty, the error values also appear in the slave s error log. SQL error information includes a timestamp showing when the most recent SQL thread error occurred. This timestamp uses the format YYMMDD HH:MM:SS, and appears in the Last_SQL_Error_Timestamp column. Issuing RESET MASTER or RESET SLAVE resets the values shown in these columns. • Replicate_Ignore_Server_Ids In MySQL 5.6, you set a slave to ignore events from 0 or more masters using the IGNORE_SERVER_IDS option of the CHANGE MASTER TO statement. By default this is blank, and is usually modified only when using a circular or other multi-master replication setup. The message shown for Replicate_Ignore_Server_Ids when not blank consists of a comma-delimited list of one or more numbers, indicating the server IDs to be ignored. For example: Replicate_Ignore_Server_Ids: 2, 6, 9 Note Ignored_server_ids also shows the server IDs to be ignored, but is a space-delimited list, which is preceded by the total number of server IDs to be ignored. For example, if a CHANGE MASTER TO statement containing the IGNORE_SERVER_IDS = (2,6,9) option has been issued to tell a slave to ignore masters having the server ID 2, 6, or 9, that information appears as: Ignored_server_ids: 3 2 6 9 where 3 is the total number of server IDs being ignored Replicate_Ignore_Server_Ids filtering is performed by the I/O thread, rather than by the SQL thread, which means that events which are filtered out are not written to the relay log. This differs from the filtering actions taken by server options such --replicate-do-table, which apply to the SQL thread. • Master_Server_Id The server_id value from the master. • Master_UUID The server_uuid value from the master. • Master_Info_File The location of the master.info file. • SQL_Delay The number of seconds that the slave must lag the master. • SQL_Remaining_Delay When Slave_SQL_Running_State is Waiting until MASTER_DELAY seconds after master executed event, this field contains the number of delay seconds remaining. At other times, this field is NULL. • Slave_SQL_Running_State The state of the SQL thread (analogous to Slave_IO_State). The value is identical to the State value of the SQL thread as displayed by SHOW PROCESSLIST; Section 8.14.7, “Replication Slave SQL Thread States”, provides a listing of possible states. • Master_Retry_Count The number of times the slave can attempt to reconnect to the master in the event of a lost connection. This value can be set using the MASTER_RETRY_COUNT option of the CHANGE MASTER TO statement (preferred) or the older --master-retry-count server option (still supported for backward compatibility). • Master_Bind The network interface that the slave is bound to, if any. This is set using the MASTER_BIND option for the CHANGE MASTER TO statement. • Last_IO_Error_Timestamp A timestamp in YYMMDD HH:MM:SS format that shows when the most recent I/O error took place. • Last_SQL_Error_Timestamp A timestamp in YYMMDD HH:MM:SS format that shows when the most recent SQL error occurred. • Retrieved_Gtid_Set The set of global transaction IDs corresponding to all transactions received by this slave. Empty if GTIDs are not in use. This is the set of all GTIDs that exist or have existed in the relay logs. Each GTID is added as soon as the Gtid_log_event is received. This can cause partially transmitted transactions to have their GTIDs included in the set. When all relay logs are lost due to executing RESET SLAVE or CHANGE MASTER TO, or due to the effects of the --relay-log-recovery option, the set is cleared. When relay_log_purge = 1, the newest relay log is always kept, and the set is not cleared. • Executed_Gtid_Set The set of global transaction IDs written in the binary log. This is the same as the value for the global gtid_executed system variable on this server, as well as the value for Executed_Gtid_Set in the output of SHOW MASTER STATUS on this server. Empty if GTIDs are not in use. See GTID Sets for more information. • Auto_Position 1 if autopositioning is in use; otherwise 0.