zoukankan      html  css  js  c++  java
  • signal头文件即各个信号的含义

    /*
     * Copyright (c) 2000-2006 Apple Computer, Inc. All rights reserved.
     *
     * @APPLE_OSREFERENCE_LICENSE_HEADER_START@
     *
     * This file contains Original Code and/or Modifications of Original Code
     * as defined in and that are subject to the Apple Public Source License
     * Version 2.0 (the 'License'). You may not use this file except in
     * compliance with the License. The rights granted to you under the License
     * may not be used to create, or enable the creation or redistribution of,
     * unlawful or unlicensed copies of an Apple operating system, or to
     * circumvent, violate, or enable the circumvention or violation of, any
     * terms of an Apple operating system software license agreement.
     *
     * Please obtain a copy of the License at
     * http://www.opensource.apple.com/apsl/ and read it before using this file.
     *
     * The Original Code and all software distributed under the License are
     * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
     * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
     * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
     * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
     * Please see the License for the specific language governing rights and
     * limitations under the License.
     *
     * @APPLE_OSREFERENCE_LICENSE_HEADER_END@
     */
    /* Copyright (c) 1995 NeXT Computer, Inc. All Rights Reserved */
    /*
     * Copyright (c) 1982, 1986, 1989, 1991, 1993
     *    The Regents of the University of California.  All rights reserved.
     * (c) UNIX System Laboratories, Inc.
     * All or some portions of this file are derived from material licensed
     * to the University of California by American Telephone and Telegraph
     * Co. or Unix System Laboratories, Inc. and are reproduced herein with
     * the permission of UNIX System Laboratories, Inc.
     *
     * Redistribution and use in source and binary forms, with or without
     * modification, are permitted provided that the following conditions
     * are met:
     * 1. Redistributions of source code must retain the above copyright
     *    notice, this list of conditions and the following disclaimer.
     * 2. Redistributions in binary form must reproduce the above copyright
     *    notice, this list of conditions and the following disclaimer in the
     *    documentation and/or other materials provided with the distribution.
     * 3. All advertising materials mentioning features or use of this software
     *    must display the following acknowledgement:
     *    This product includes software developed by the University of
     *    California, Berkeley and its contributors.
     * 4. Neither the name of the University nor the names of its contributors
     *    may be used to endorse or promote products derived from this software
     *    without specific prior written permission.
     *
     * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
     * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
     * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     * SUCH DAMAGE.
     *
     *    @(#)signal.h    8.2 (Berkeley) 1/21/94
     */
    
    #ifndef _SYS_SIGNAL_H_
    #define _SYS_SIGNAL_H_
    
    #include <sys/cdefs.h>
    #include <sys/appleapiopts.h>
    #include <Availability.h>
    
    #define __DARWIN_NSIG   32      /* counting 0; could be 33 (mask is 1-32) */
    
    #if !defined(_ANSI_SOURCE) && (!defined(_POSIX_C_SOURCE) || defined(_DARWIN_C_SOURCE))
    #define NSIG    __DARWIN_NSIG
    #endif
    
    #include <machine/signal.h>     /* sigcontext; codes for SIGILL, SIGFPE */
    
    #define SIGHUP  1       /* hangup */
    #define SIGINT  2       /* interrupt */
    #define SIGQUIT 3       /* quit */
    #define SIGILL  4       /* illegal instruction (not reset when caught) */
    #define SIGTRAP 5       /* trace trap (not reset when caught) */
    #define SIGABRT 6       /* abort() */
    #if  (defined(_POSIX_C_SOURCE) && !defined(_DARWIN_C_SOURCE))
    #define SIGPOLL 7       /* pollable event ([XSR] generated, not supported) */
    #else   /* (!_POSIX_C_SOURCE || _DARWIN_C_SOURCE) */
    #define SIGIOT  SIGABRT /* compatibility */
    #define SIGEMT  7       /* EMT instruction */
    #endif  /* (!_POSIX_C_SOURCE || _DARWIN_C_SOURCE) */
    #define SIGFPE  8       /* floating point exception */
    #define SIGKILL 9       /* kill (cannot be caught or ignored) */
    #define SIGBUS  10      /* bus error */
    #define SIGSEGV 11      /* segmentation violation */
    #define SIGSYS  12      /* bad argument to system call */
    #define SIGPIPE 13      /* write on a pipe with no one to read it */
    #define SIGALRM 14      /* alarm clock */
    #define SIGTERM 15      /* software termination signal from kill */
    #define SIGURG  16      /* urgent condition on IO channel */
    #define SIGSTOP 17      /* sendable stop signal not from tty */
    #define SIGTSTP 18      /* stop signal from tty */
    #define SIGCONT 19      /* continue a stopped process */
    #define SIGCHLD 20      /* to parent on child stop or exit */
    #define SIGTTIN 21      /* to readers pgrp upon background tty read */
    #define SIGTTOU 22      /* like TTIN for output if (tp->t_local&LTOSTOP) */
    #if  (!defined(_POSIX_C_SOURCE) || defined(_DARWIN_C_SOURCE))
    #define SIGIO   23      /* input/output possible signal */
    #endif
    #define SIGXCPU 24      /* exceeded CPU time limit */
    #define SIGXFSZ 25      /* exceeded file size limit */
    #define SIGVTALRM 26    /* virtual time alarm */
    #define SIGPROF 27      /* profiling time alarm */
    #if  (!defined(_POSIX_C_SOURCE) || defined(_DARWIN_C_SOURCE))
    #define SIGWINCH 28     /* window size changes */
    #define SIGINFO 29      /* information request */
    #endif
    #define SIGUSR1 30      /* user defined signal 1 */
    #define SIGUSR2 31      /* user defined signal 2 */
    
    #if defined(_ANSI_SOURCE) || __DARWIN_UNIX03 || defined(__cplusplus)
    /*
     * Language spec sez we must list exactly one parameter, even though we
     * actually supply three.  Ugh!
     * SIG_HOLD is chosen to avoid KERN_SIG_* values in <sys/signalvar.h>
     */
    #define SIG_DFL         (void (*)(int))0
    #define SIG_IGN         (void (*)(int))1
    #define SIG_HOLD        (void (*)(int))5
    #define SIG_ERR         ((void (*)(int))-1)
    #else
    /* DO NOT REMOVE THE COMMENTED OUT int: fixincludes needs to see them */
    #define SIG_DFL         (void (*)( /*int*/ ))0
    #define SIG_IGN         (void (*)( /*int*/ ))1
    #define SIG_HOLD        (void (*)( /*int*/ ))5
    #define SIG_ERR         ((void (*)( /*int*/ ))-1)
    #endif
    
    #ifndef _ANSI_SOURCE
    #include <sys/_types.h>
    
    #include <machine/_mcontext.h>
    
    #include <sys/_pthread/_pthread_attr_t.h>
    
    #include <sys/_types/_sigaltstack.h>
    #include <sys/_types/_ucontext.h>
    
    #include <sys/_types/_pid_t.h>
    #include <sys/_types/_sigset_t.h>
    #include <sys/_types/_size_t.h>
    #include <sys/_types/_uid_t.h>
    
    union sigval {
        /* Members as suggested by Annex C of POSIX 1003.1b. */
        int     sival_int;
        void    *sival_ptr;
    };
    
    #define SIGEV_NONE      0       /* No async notification */
    #define SIGEV_SIGNAL    1       /* aio - completion notification */
    #define SIGEV_THREAD    3       /* [NOTIMP] [RTS] call notification function */
    
    struct sigevent {
        int                             sigev_notify;                           /* Notification type */
        int                             sigev_signo;                            /* Signal number */
        union sigval    sigev_value;                            /* Signal value */
        void                    (*sigev_notify_function)(union sigval);   /* Notification function */
        pthread_attr_t  *sigev_notify_attributes;       /* Notification attributes */
    };
    
    
    typedef struct __siginfo {
        int     si_signo;               /* signal number */
        int     si_errno;               /* errno association */
        int     si_code;                /* signal code */
        pid_t   si_pid;                 /* sending process */
        uid_t   si_uid;                 /* sender's ruid */
        int     si_status;              /* exit value */
        void    *si_addr;               /* faulting instruction */
        union sigval si_value;          /* signal value */
        long    si_band;                /* band event for SIGPOLL */
        unsigned long   __pad[7];       /* Reserved for Future Use */
    } siginfo_t;
    
    
    /*
     * When the signal is SIGILL or SIGFPE, si_addr contains the address of
     * the faulting instruction.
     * When the signal is SIGSEGV or SIGBUS, si_addr contains the address of
     * the faulting memory reference. Although for x86 there are cases of SIGSEGV
     * for which si_addr cannot be determined and is NULL.
     * If the signal is SIGCHLD, the si_pid field will contain the child process ID,
     *  si_status contains the exit value or signal and
     *  si_uid contains the real user ID of the process that sent the signal.
     */
    
    /* Values for si_code */
    
    /* Codes for SIGILL */
    #if !defined(_POSIX_C_SOURCE) || defined(_DARWIN_C_SOURCE)
    #define ILL_NOOP        0       /* if only I knew... */
    #endif
    #define ILL_ILLOPC      1       /* [XSI] illegal opcode */
    #define ILL_ILLTRP      2       /* [XSI] illegal trap */
    #define ILL_PRVOPC      3       /* [XSI] privileged opcode */
    #define ILL_ILLOPN      4       /* [XSI] illegal operand -NOTIMP */
    #define ILL_ILLADR      5       /* [XSI] illegal addressing mode -NOTIMP */
    #define ILL_PRVREG      6       /* [XSI] privileged register -NOTIMP */
    #define ILL_COPROC      7       /* [XSI] coprocessor error -NOTIMP */
    #define ILL_BADSTK      8       /* [XSI] internal stack error -NOTIMP */
    
    /* Codes for SIGFPE */
    #if !defined(_POSIX_C_SOURCE) || defined(_DARWIN_C_SOURCE)
    #define FPE_NOOP        0       /* if only I knew... */
    #endif
    #define FPE_FLTDIV      1       /* [XSI] floating point divide by zero */
    #define FPE_FLTOVF      2       /* [XSI] floating point overflow */
    #define FPE_FLTUND      3       /* [XSI] floating point underflow */
    #define FPE_FLTRES      4       /* [XSI] floating point inexact result */
    #define FPE_FLTINV      5       /* [XSI] invalid floating point operation */
    #define FPE_FLTSUB      6       /* [XSI] subscript out of range -NOTIMP */
    #define FPE_INTDIV      7       /* [XSI] integer divide by zero */
    #define FPE_INTOVF      8       /* [XSI] integer overflow */
    
    /* Codes for SIGSEGV */
    #if !defined(_POSIX_C_SOURCE) || defined(_DARWIN_C_SOURCE)
    #define SEGV_NOOP       0       /* if only I knew... */
    #endif
    #define SEGV_MAPERR     1       /* [XSI] address not mapped to object */
    #define SEGV_ACCERR     2       /* [XSI] invalid permission for mapped object */
    
    /* Codes for SIGBUS */
    #if !defined(_POSIX_C_SOURCE) || defined(_DARWIN_C_SOURCE)
    #define BUS_NOOP        0       /* if only I knew... */
    #endif
    #define BUS_ADRALN      1       /* [XSI] Invalid address alignment */
    #define BUS_ADRERR      2       /* [XSI] Nonexistent physical address -NOTIMP */
    #define BUS_OBJERR      3       /* [XSI] Object-specific HW error - NOTIMP */
    
    /* Codes for SIGTRAP */
    #define TRAP_BRKPT      1       /* [XSI] Process breakpoint -NOTIMP */
    #define TRAP_TRACE      2       /* [XSI] Process trace trap -NOTIMP */
    
    /* Codes for SIGCHLD */
    #if !defined(_POSIX_C_SOURCE) || defined(_DARWIN_C_SOURCE)
    #define CLD_NOOP        0       /* if only I knew... */
    #endif
    #define CLD_EXITED      1       /* [XSI] child has exited */
    #define CLD_KILLED      2       /* [XSI] terminated abnormally, no core file */
    #define CLD_DUMPED      3       /* [XSI] terminated abnormally, core file */
    #define CLD_TRAPPED     4       /* [XSI] traced child has trapped */
    #define CLD_STOPPED     5       /* [XSI] child has stopped */
    #define CLD_CONTINUED   6       /* [XSI] stopped child has continued */
    
    /* Codes for SIGPOLL */
    #define POLL_IN         1       /* [XSR] Data input available */
    #define POLL_OUT        2       /* [XSR] Output buffers available */
    #define POLL_MSG        3       /* [XSR] Input message available */
    #define POLL_ERR        4       /* [XSR] I/O error */
    #define POLL_PRI        5       /* [XSR] High priority input available */
    #define POLL_HUP        6       /* [XSR] Device disconnected */
    
    /* union for signal handlers */
    union __sigaction_u {
        void    (*__sa_handler)(int);
        void    (*__sa_sigaction)(int, struct __siginfo *,
            void *);
    };
    
    /* Signal vector template for Kernel user boundary */
    struct  __sigaction {
        union __sigaction_u __sigaction_u;  /* signal handler */
        void    (*sa_tramp)(void *, int, int, siginfo_t *, void *);
        sigset_t sa_mask;               /* signal mask to apply */
        int     sa_flags;               /* see signal options below */
    };
    
    /*
     * Signal vector "template" used in sigaction call.
     */
    struct  sigaction {
        union __sigaction_u __sigaction_u;  /* signal handler */
        sigset_t sa_mask;               /* signal mask to apply */
        int     sa_flags;               /* see signal options below */
    };
    
    
    
    /* if SA_SIGINFO is set, sa_sigaction is to be used instead of sa_handler. */
    #define sa_handler      __sigaction_u.__sa_handler
    #define sa_sigaction    __sigaction_u.__sa_sigaction
    
    #define SA_ONSTACK      0x0001  /* take signal on signal stack */
    #define SA_RESTART      0x0002  /* restart system on signal return */
    #define SA_RESETHAND    0x0004  /* reset to SIG_DFL when taking signal */
    #define SA_NOCLDSTOP    0x0008  /* do not generate SIGCHLD on child stop */
    #define SA_NODEFER      0x0010  /* don't mask the signal we're delivering */
    #define SA_NOCLDWAIT    0x0020  /* don't keep zombies around */
    #define SA_SIGINFO      0x0040  /* signal handler with SA_SIGINFO args */
    #if !defined(_POSIX_C_SOURCE) || defined(_DARWIN_C_SOURCE)
    #define SA_USERTRAMP    0x0100  /* do not bounce off kernel's sigtramp */
    /* This will provide 64bit register set in a 32bit user address space */
    #define SA_64REGSET     0x0200  /* signal handler with SA_SIGINFO args with 64bit regs information */
    #endif /* (!_POSIX_C_SOURCE || _DARWIN_C_SOURCE) */
    
    /* the following are the only bits we support from user space, the
     * rest are for kernel use only.
     */
    #define SA_USERSPACE_MASK (SA_ONSTACK | SA_RESTART | SA_RESETHAND | SA_NOCLDSTOP | SA_NODEFER | SA_NOCLDWAIT | SA_SIGINFO)
    
    /*
     * Flags for sigprocmask:
     */
    #define SIG_BLOCK       1       /* block specified signal set */
    #define SIG_UNBLOCK     2       /* unblock specified signal set */
    #define SIG_SETMASK     3       /* set specified signal set */
    
    /* POSIX 1003.1b required values. */
    #define SI_USER         0x10001 /* [CX] signal from kill() */
    #define SI_QUEUE        0x10002 /* [CX] signal from sigqueue() */
    #define SI_TIMER        0x10003 /* [CX] timer expiration */
    #define SI_ASYNCIO      0x10004 /* [CX] aio request completion */
    #define SI_MESGQ        0x10005 /* [CX]    from message arrival on empty queue */
    
    #if !defined(_POSIX_C_SOURCE) || defined(_DARWIN_C_SOURCE)
    typedef void (*sig_t)(int);     /* type of signal function */
    #endif
    
    /*
     * Structure used in sigaltstack call.
     */
    
    #define SS_ONSTACK      0x0001  /* take signal on signal stack */
    #define SS_DISABLE      0x0004  /* disable taking signals on alternate stack */
    #define MINSIGSTKSZ     32768   /* (32K)minimum allowable stack */
    #define SIGSTKSZ        131072  /* (128K)recommended stack size */
    
    #if !defined(_POSIX_C_SOURCE) || defined(_DARWIN_C_SOURCE)
    /*
     * 4.3 compatibility:
     * Signal vector "template" used in sigvec call.
     */
    struct  sigvec {
        void    (*sv_handler)(int);     /* signal handler */
        int     sv_mask;                /* signal mask to apply */
        int     sv_flags;               /* see signal options below */
    };
    
    #define SV_ONSTACK      SA_ONSTACK
    #define SV_INTERRUPT    SA_RESTART      /* same bit, opposite sense */
    #define SV_RESETHAND    SA_RESETHAND
    #define SV_NODEFER      SA_NODEFER
    #define SV_NOCLDSTOP    SA_NOCLDSTOP
    #define SV_SIGINFO      SA_SIGINFO
    
    #define sv_onstack sv_flags     /* isn't compatibility wonderful! */
    #endif /* (!_POSIX_C_SOURCE || _DARWIN_C_SOURCE) */
    
    /*
     * Structure used in sigstack call.
     */
    struct  sigstack {
        char    *ss_sp;                 /* signal stack pointer */
        int     ss_onstack;             /* current status */
    };
    
    #if !defined(_POSIX_C_SOURCE) || defined(_DARWIN_C_SOURCE)
    /*
     * Macro for converting signal number to a mask suitable for
     * sigblock().
     */
    #define sigmask(m)      (1 << ((m)-1))
    
    
    #define BADSIG          SIG_ERR
    
    #endif  /* (!_POSIX_C_SOURCE || _DARWIN_C_SOURCE) */
    #endif  /* !_ANSI_SOURCE */
    
    /*
     * For historical reasons; programs expect signal's return value to be
     * defined by <sys/signal.h>.
     */
    __BEGIN_DECLS
        void(*signal(int, void (*)(int)))(int);
    __END_DECLS
    #endif  /* !_SYS_SIGNAL_H_ */
  • 相关阅读:
    OCP-1Z0-053-V12.02-622题
    OCP-1Z0-053-V12.02-501题
    Flex实现查询和重置
    闪回事务处理回退
    闪回数据归档测试
    闪回数据归档
    OCP-1Z0-053-V12.02-166题
    VC-摄像头控制SDK源码
    MFC 的 Picture Control 加载 BMP/PNG 图片的方法
    OCP-1Z0-051-V9.02-25题
  • 原文地址:https://www.cnblogs.com/yuxiaoyiyou/p/13537116.html
Copyright © 2011-2022 走看看