zoukankan      html  css  js  c++  java
  • Mobile phones·POJ1195

    Mobile phones

    Time Limit: 5000MS   Memory Limit: 65536K

    Description

    Suppose that the fourth generation mobile phone base stations in the Tampere area operate as follows. The area is divided into squares. The squares form an S * S matrix with the rows and columns numbered from 0 to S-1. Each square contains a base station. The number of active mobile phones inside a square can change because a phone is moved from a square to another or a phone is switched on or off. At times, each base station reports the change in the number of active phones to the main base station along with the row and the column of the matrix. 

    Write a program, which receives these reports and answers queries about the current total number of active mobile phones in any rectangle-shaped area. 

    Input

    The input is read from standard input as integers and the answers to the queries are written to standard output as integers. The input is encoded as follows. Each input comes on a separate line, and consists of one instruction integer and a number of parameter integers according to the following table. 

    The values will always be in range, so there is no need to check them. In particular, if A is negative, it can be assumed that it will not reduce the square value below zero. The indexing starts at 0, e.g. for a table of size 4 * 4, we have 0 <= X <= 3 and 0 <= Y <= 3. 

    Table size: 1 * 1 <= S * S <= 1024 * 1024 
    Cell value V at any time: 0 <= V <= 32767 
    Update amount: -32768 <= A <= 32767 
    No of instructions in input: 3 <= U <= 60002 
    Maximum number of phones in the whole table: M= 2^30 

    Output

    Your program should not answer anything to lines with an instruction other than 2. If the instruction is 2, then your program is expected to answer the query by writing the answer as a single line containing a single integer to standard output.

    Sample Input

    0 4
    1 1 2 3
    2 0 0 2 2 
    1 1 1 2
    1 1 2 -1
    2 1 1 2 3 
    3
    

    Sample Output

    3
    4

    Source

     
    好像没有标记下传的东西= = 不过想想也知道lazy肯定是打在y轴上的。。
     
    Codes:
     1 #include<set>
     2 #include<queue>
     3 #include<vector>
     4 #include<cstdio>
     5 #include<cstdlib>
     6 #include<cstring>
     7 #include<iostream>
     8 #include<algorithm>
     9 using namespace std;
    10 const int N = 1025;
    11 #define Ch1 ((i)<<1)
    12 #define Ch2 ((Ch1)|1)
    13 #define For(i,n) for(int i=1;i<=n;i++)
    14 #define Rep(i,l,r) for(int i=l;i<=r;i++)
    15 
    16 struct tnodey{
    17     short l,r,mid;
    18     int sum;
    19 };
    20 
    21 struct tnodex{
    22     short l,r,mid;
    23     tnodey y[N*3];
    24 }T[N*3];
    25 
    26 int op,n,A;
    27 int x1,y1,x2,y2,x,y;
    28 
    29 void BuildY(int root,int i,int l,int r){
    30     T[root].y[i].l = l;T[root].y[i].r = r; T[root].y[i].mid = (l+r)>>1;
    31     T[root].y[i].sum = 0;
    32     if(l==r) return;
    33     BuildY(root,Ch1,l,T[root].y[i].mid); BuildY(root,Ch2,T[root].y[i].mid+1,r);
    34 }
    35 
    36 void BuildX(int i,int l,int r){
    37     BuildY(i,1,0,n);
    38     T[i].l = l; T[i].r = r; T[i].mid = (l+r)>>1;
    39     if(l==r) return;
    40     BuildX(Ch1,l,T[i].mid);BuildX(Ch2,T[i].mid+1,r);
    41 }
    42 
    43 void ModifyY(int root,int i,int x,int delta){
    44     if(T[root].y[i].l==T[root].y[i].r) {T[root].y[i].sum += delta;return;}
    45     if(x<=T[root].y[i].mid) ModifyY(root,Ch1,x,delta);
    46     else                    ModifyY(root,Ch2,x,delta);
    47     T[root].y[i].sum = T[root].y[Ch1].sum + T[root].y[Ch2].sum;
    48 }
    49 
    50 void ModifyX(int i,int x,int delta){
    51     ModifyY(i,1,y,delta);
    52     if(T[i].l==T[i].r) return;
    53     if(x<=T[i].mid) ModifyX(Ch1,x,delta);
    54     else            ModifyX(Ch2,x,delta);
    55 }
    56 
    57 int queryY(int root,int i,int l,int r){
    58     if(l<=T[root].y[i].l&&T[root].y[i].r<=r) return T[root].y[i].sum;
    59     if(r<=T[root].y[i].mid) return queryY(root,Ch1,l,r);else
    60     if(l>T[root].y[i].mid)  return queryY(root,Ch2,l,r);else
    61     return queryY(root,Ch1,l,T[root].y[i].mid) + queryY(root,Ch2,T[root].y[i].mid+1,r);
    62 }
    63 
    64 int queryX(int i,int l,int r){
    65     if(l<=T[i].l&&T[i].r<=r) return queryY(i,1,y1,y2);
    66     if(r<=T[i].mid) return queryX(Ch1,l,r);else
    67     if(l>T[i].mid)  return queryX(Ch2,l,r);else
    68     return queryX(Ch1,l,T[i].mid) + queryX(Ch2,T[i].mid+1,r);
    69 }
    70 
    71 void init(){
    72     scanf("%d%d",&op,&n);n--;
    73     BuildX(1,0,n);
    74     while(op!=3){
    75         scanf("%d",&op);
    76         if(op==1){
    77             scanf("%d%d%d",&x,&y,&A);
    78             ModifyX(1,x,A);
    79         }
    80         if(op==2){
    81             scanf("%d%d%d%d",&x1,&y1,&x2,&y2);
    82             printf("%d
    ",queryX(1,x1,x2));
    83         }
    84     }
    85 }
    86 
    87 int main(){
    88     init();
    89     return 0;
    90 }
  • 相关阅读:
    js实现图片上传前预览
    WPF实现鼠标拖动控件并带有中间动效
    Redis 挂了自动重启的shell 脚本。
    PIE-Basic教程目录索引
    从零实现Linux一键自动化部署.netCore+Vue+Nginx项目到Docker中
    在BlazorWebAssembly中使用Autofac
    angular报错:Cannot assign to a reference or variable
    ASP.NET Core Logging Solution
    Typora + PicGo-Core + Custom Command 实现上传图片到图床
    mysql like多个
  • 原文地址:https://www.cnblogs.com/zjdx1998/p/3818637.html
Copyright © 2011-2022 走看看