http://ivyl.0xcafe.eu/2012/11/30/debuggin-kernel/
The Problem
Suppose you’ve written kernel module and it do not work as intended. You cannot find anything by reading code. printk debugging left you with noting. You wish there was a way to look how things act in the wild… It would be nice to run some debugger, create few breakpoints and operate on live data, just like you used to do with your desktop applications…
As it appears, some twisted fairy already fulfilled that wish. The thing is called KGDB and it is both a little scary and pretty awesome.
KGDB
KGDB, as it’s name suggests, uses GDB, and does that in all it’s glory. You can peek at variables, execute code, jump around, create breakpoints (even conditional ones) peek at threads, etc. All this while having corresponding source in front of you.
Luckily for us KGDB in a light version was merged around mid-2.6 series into mainline. That means no patching. We just must have kernel with few options turned on (in most distributions, if not all, it means recompilation) and need serial port connection between two PCs (virtual machine with emulated RS232 is fine).
Kernel
You need to build kernel on target machine with following options:
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_INFO=y
CONFIG_FRAME_POINTER=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
Note that those are essentials and there are lots of other DEBUG options. They are in form of:
CONFIG_DEBUG_NAME
Check them out in Kernel Hacking configuration section.
If you want to step into not your code you should also turn off GCC optimizations (changing -O2 flag to -O0) on parts of the kernel of your interest. Otherwise be prepared to strange behaviour when viewing code. There will be optimized out values, odd code jumping, etc. Your module also should be compiled with -O0, -g and -ggdb options to add in symbols and turn off optimizations.
Remember - do not ever turn optimizations on the whole kernel. Developers used some wicked wizardry like depending on function in-lining that comes with -O2 flag. Out in the intertubes exists patch that aims stripping optimizations from most of the Linux, excluding parts that needs them. You may be interested, I haven’t found it usable.
Setup
On the other end of serial connection, in order to run GDB, you will need vmlinux file (it is uncompressed and contains debugging symbols) which you should find in root of kernel build directory. The file should weight around 100MiB. Additionally you have to keep kernel and module sources around since it will be handy to have GDB print them along.
RS232
If you physically connected two machines then you are ready with ttyS0. If you used VM’s virtual COM then you should get socket somewhere in file system. Check configuration for specific path. You can use socat to turn it into char device.
socat -d -d /home/ivyl/virtualbox/myvm/serial1 pty
It will print out device path it created.
Target Machine
We need to prepare target (the one to be debugged) system. KGDB needs to know on which device it’s supposed to listen and which baudrate it should use. You can do it via /sys:
echo ttyS0,115200 > /sys/module/kgdboc/parameters/kgdboc
or by adding kernel parameter:
kgdboc=ttyS0,115200
If you are using virutalized com ttyS0 should be fine.
You may also be interested in kgdbwait parameter. It will make kernel to break as soon as possible during boot process.
Now only thing left is to break the machine (stop execution, wait for debugger interaction) by pressing SysRq-G (where SysRq is Alt + PrtSc) or executing from command line the following:
echo g > /proc/sysrq-trigger
Firing GDB
With above preparations done, you have to attach debugger to it. I recommend doing it in kernel’s source directory. It’s easiest way of making GDB source aware.
cd /usr/src/linux-src
gdb /path/to/copied/vmlinux
Now you are within GDB shell. You can connect to remote machine by setting same baudrate and point device you want connect to.
set remotebaud 115200
target remote /dev/pts/4
You should substitude /dev/pts/4 with device of your choice (one created by socat or the physical).
If you broke target system you should be already able to poke around. If not, look above for advice how to do it.
If you don’t know what to do now take some example GDB tutorial. There is much more to GDB. You may also want to try GUI called DDD.
And Module?
That’s fine, but how to debug mentioned modules, you ask? Nothing simpler! If you are testing own module, in it’s build directory, after compilation with appropriate flags, there should be two files that matters to us. module.ko, which you will load through insmod, and module.o which we will load into GDB since it contains symbols.
Just load .o on the target machine. Now take a look at file:
/sys/module/<module_name>/sections/.text
It contains memory address where module was loaded. Now, on the other machine, you should feed GDB with module.o and mentioned address using:
add-symbol-file module.o 0xd80a4400
Voila! Now go debug like there’s no tomorrow.
PS. I also made this script to make repetitive task around KGDB automated. It’s not all pretty and shiny but maybe you will find it useful.