zoukankan      html  css  js  c++  java
  • NOI2014 起床困难综合症

    3668: [Noi2014]起床困难综合症

    Time Limit: 10 Sec  Memory Limit: 512 MB
    Submit: 225  Solved: 153
    [Submit][Status]

    Description

    21 世纪,许多人得了一种奇怪的病:起床困难综合症,其临床表现为:起床难,起床后精神不佳。作为一名青春阳光好少年,atm 一直坚持与起床困难综合症作斗争。通过研究相关文献,他找到了该病的发病原因:在深邃的太平洋海底中,出现了一条名为 drd 的巨龙,它掌握着睡眠之精髓,能随意延长大家的睡眠时间。正是由于 drd 的活动,起床困难综合症愈演愈烈,以惊人的速度在世界上传播。为了彻底消灭这种病,atm 决定前往海底,消灭这条恶龙。
    历经千辛万苦,atm 终于来到了 drd 所在的地方,准备与其展开艰苦卓绝的战斗。drd 有着十分特殊的技能,他的防御战线能够使用一定的运算来改变他受到的伤害。具体说来,drd 的防御战线由 n扇防御门组成。每扇防御门包括一个运算op和一个参数t,其中运算一定是OR,XOR,AND中的一种,参数则一定为非负整数。如果还未通过防御门时攻击力为x,则其通过这扇防御门后攻击力将变为x op t。最终drd 受到的伤害为对方初始攻击力x依次经过所有n扇防御门后转变得到的攻击力。
    由于atm水平有限,他的初始攻击力只能为0到m之间的一个整数(即他的初始攻击力只能在0,1,...,m中任选,但在通过防御门之后的攻击力不受 m的限制)。为了节省体力,他希望通过选择合适的初始攻击力使得他的攻击能让 drd 受到最大的伤害,请你帮他计算一下,他的一次攻击最多能使 drd 受到多少伤害。

    Input

    第1行包含2个整数,依次为n,m,表示drd有n扇防御门,atm的初始攻击力为0到m之间的整数。接下来n行,依次表示每一扇防御门。每行包括一个字符串op和一个非负整数t,两者由一个空格隔开,且op在前,t在后,op表示该防御门所对应的操作, t表示对应的参数。

    Output

    一行一个整数,表示atm的一次攻击最多使 drd 受到多少伤害。

    Sample Input

    3 10
    AND 5
    OR 6
    XOR 7

    Sample Output

    1

    HINT

    【样例说明1】

    atm可以选择的初始攻击力为0,1,...,10。

    假设初始攻击力为4,最终攻击力经过了如下计算

    4 AND 5 = 4

    4 OR 6 = 6

    6 XOR 7 = 1

    类似的,我们可以计算出初始攻击力为1,3,5,7,9时最终攻击力为0,初始攻击力为0,2,4,6,8,10时最终攻击力为1,因此atm的一次攻击最多使 drd 受到的伤害值为1。

    0<=m<=10^9

    0<=t<=10^9  

    一定为OR,XOR,AND 中的一种

    【运算解释】

    在本题中,选手需要先将数字变换为二进制后再进行计算。如果操作的两个数二进制长度不同,则在前补0至相同长度。

          OR为按位或运算,处理两个长度相同的二进制数,两个相应的二进制位中只要有一个为1,则该位的结果值为1,否则为0。XOR为按位异或运算,对等长二进制模式或二进制数的每一位执行逻辑异或操作。如果两个相应的二进制位不同(相异),则该位的结果值为1,否则该位为0。 AND 为按位与运算,处理两个长度相同的二进制数,两个相应的二进制位都为1,该位的结果值才为1,否则为0。

          例如,我们将十进制数5与十进制数3分别进行OR,XOR 与 AND 运算,可以得到如下结果:

                  0101 (十进制 5)           0101 (十进制 5)           0101 (十进制 5)

             OR 0011 (十进制 3)    XOR 0011 (十进制 3)    AND 0011 (十进制 3)

               = 0111 (十进制 7)       = 0110 (十进制 6)        = 0001 (十进制 1)

    Source

    题解:

    发现了一个比较好的性质,如果有一位or 1了就一定为1,所以不论之前的取值,如果有一位and 0了就一定为0

    这样就只用考虑剩下的位了

    考场上竟然sb的去枚举每一位(for i=1 to 1《《tot-1 do)。。。心里还想如果数据是随机的话,肯定需要枚举的位数不多。。。我太天真了。。。

    其实想到这儿已经接近正解了,考虑到每一位互不影响,所以我们只单独枚举每一位,其他位都是0,来做一遍,看看能否为0,接下来就是sb贪心了

    具体实现的时候,可以先用0做一遍,这样在枚举32位的时候,如果0得到的答案中这一位已经为1,那就不用考虑了,直接将这一位用0即可

    代码:

    1.考场80分(我还写了那么多小程序。。。)

     1 var n,m,ans,x,y:int64;
     2     i,j,tot,mark:longint;
     3     a,b:array[0..1000000] of int64;
     4     c:array[0..100] of boolean;
     5     d:array[0..100] of int64;
     6     ch:char;
     7     flag:boolean;
     8 procedure init;
     9  begin
    10  readln(n,m);
    11  for i:=1 to n do
    12   begin
    13   read(ch);if ch='A' then b[i]:=1 else if ch='O' then b[i]:=2 else b[i]:=3;
    14   while ch<>' ' do read(ch);
    15   readln(a[i]);
    16   if (b[i]=1) and (a[i]=0) then begin flag:=true;mark:=i;end;
    17   end;
    18  end;
    19 procedure work1;
    20  begin
    21  ans:=0;
    22  for j:=0 to m do
    23   begin
    24   x:=j;
    25    for i:=1 to n do if b[i]=1 then x:=x and a[i] else if b[i]=2 then x:=x or a[i] else x:=x xor a[i];
    26   if x>ans then ans:=x;
    27   end;
    28  writeln(ans);
    29  end;
    30 procedure work2;
    31  begin
    32  x:=0;
    33  for i:=mark+1 to n do if b[i]=1 then x:=x and a[i] else if b[i]=2 then x:=x or a[i] else x:=x xor a[i];
    34  writeln(x);
    35  end;
    36 procedure work4;
    37  begin
    38  x:=0;
    39  for i:=1 to tot do inc(x,1<<(d[i]-1));
    40  for i:=1 to n do if b[i]=1 then x:=x and a[i] else if b[i]=2 then x:=x or a[i] else x:=x xor a[i];
    41  ans:=x;
    42  for j:=1 to 500 do
    43   begin
    44   x:=random(m+1);
    45   for i:=1 to n do if b[i]=1 then x:=x and a[i] else if b[i]=2 then x:=x or a[i] else x:=x xor a[i];
    46   if x>ans then ans:=x;
    47   end;
    48  writeln(ans);
    49  end;
    50 procedure work3;
    51  begin
    52  fillchar(c,sizeof(c),false);
    53  for i:=1 to n do
    54   if b[i]=2 then
    55    for j:=1 to 32 do if (a[i] and (1<<(j-1))<>0) then c[j]:=true;
    56  for i:=1 to n do
    57   if b[i]=1 then
    58    for j:=1 to 32 do if (a[i] and (1<<(j-1))=0) then c[j]:=true;
    59  tot:=0;
    60  for i:=1 to 32 do if not(c[i]) then begin inc(tot);d[tot]:=i;end;
    61  y:=trunc(ln(m)/ln(2))+1;
    62  while d[tot]>y do dec(tot);
    63  if (1<<tot)*n>100000000 then begin work4;exit;end;
    64  for i:=0 to 1<<tot-1 do
    65   begin
    66    x:=0;
    67    for j:=1 to tot do
    68     if i and (1<<(j-1))<>0 then inc(x,1<<(d[j]-1));
    69    if x>m then continue;
    70     for j:=1 to n do if b[j]=1 then x:=x and a[j] else if b[j]=2 then x:=x or a[j] else x:=x xor a[j];
    71    if x>ans then ans:=x;
    72   end;
    73  writeln(ans);
    74  end;
    75 begin
    76  assign(input,'sleep.in');assign(output,'sleep.out');
    77  reset(input);rewrite(output);
    78  ans:=0;
    79  flag:=false;
    80  init;
    81  if n*m<50000000 then work1 else if flag then work2 else work3;
    82  close(input);close(output);
    83 end. 
    View Code

    2.正解100分

     1 var n,m,ans,x,y,z,cnt:int64;
     2     i,j,mark:longint;
     3     a,b:array[0..1000000] of int64;
     4     c:array[0..100] of boolean;
     5     ch:char;
     6     flag:boolean;
     7 procedure init;
     8  begin
     9  readln(n,m);
    10  for i:=1 to n do
    11   begin
    12   read(ch);if ch='A' then b[i]:=1 else if ch='O' then b[i]:=2 else b[i]:=3;
    13   while ch<>' ' do read(ch);
    14   readln(a[i]);
    15   if (b[i]=1) and (a[i]=0) then begin flag:=true;mark:=i;end;
    16   end;
    17  end;
    18 procedure work2;
    19  begin
    20  x:=0;
    21  for i:=mark+1 to n do if b[i]=1 then x:=x and a[i] else if b[i]=2 then x:=x or a[i] else x:=x xor a[i];
    22  writeln(x);
    23  end;
    24 procedure work1;
    25  begin
    26  x:=0;
    27  for i:=1 to n do if b[i]=1 then x:=x and a[i] else if b[i]=2 then x:=x or a[i] else x:=x xor a[i];
    28  z:=x;ans:=x;cnt:=0;
    29  fillchar(c,sizeof(c),false);
    30  for i:=31 downto 1 do
    31    if z and (1<<(i-1))=0 then
    32      begin
    33        x:=1<<(i-1);
    34        for j:=1 to n do if b[j]=1 then x:=x and a[j] else if b[j]=2 then x:=x or a[j] else x:=x xor a[j];
    35        if (x and (1<<(i-1))<>0) and (cnt+1<<(i-1)<=m) then begin c[i]:=true;inc(cnt,1<<(i-1));end;
    36      end;
    37  for i:=1 to 31 do if c[i] then inc(ans,1<<(i-1));
    38  writeln(ans);
    39  end;
    40 begin
    41  assign(input,'sleep.in');assign(output,'sleep.out');
    42  reset(input);rewrite(output);
    43  ans:=0;
    44  flag:=false;
    45  init;
    46  if flag then work2 else work1;
    47  close(input);close(output);
    48 end.      
    View Code
  • 相关阅读:
    Lua与C++的一些交互
    图片叠加文字
    VS智能提示消失的解决方法
    VS2008包加载失败的真正解决方法
    WINDOWS下操作注册表 REG_EXPAND_SZ与REG_SZ的区别
    lua支持中文变量名
    SCROLLVIEW设置初始滚动条位置
    WINDOWS XP 自动关机
    C#通过WMI操作远程机器
    [InstallShield]如何在不同的Script文件之间共享全局变量
  • 原文地址:https://www.cnblogs.com/zyfzyf/p/3888021.html
Copyright © 2011-2022 走看看