集群特性
秒级自动failover
failover零数据丢失(防脑裂)
支持在线主从切换
支持读写分离
支持读负载均衡
支持动态增加和删除只读节点
一、操作系统配置(pg01 && pg02 && pg03)
1.禁用防火墙、selinux
2.同步系统时间
3.修改hosts文件
# more /etc/hosts
127.0.0.1 localhost
192.168.43.83 pg01
192.168.43.123 pg02
192.168.43.246 pg03
### vip ####
192.168.43.10 vip-master
192.168.43.20 vip-slave
4.配置系统参数
# vim /etc/security/limits.conf
* soft stack 10240
* hard stack 10240
* soft nofile 131072
* hard nofile 131072
* soft nproc 131072
* hard nproc 131072
* soft core unlimited
* hard core unlimited
# vim /etc/sysctl.conf
kernel.sem = 50100 64128000 50100 1280
# sysctl -p
二、安装高可用集群包(pg01 && pg02 && pg03)
1,安装集群包
# yum install -y pacemaker corosync pcs ipvsadm
2.启用pcsd服务
# systemctl start pcsd
# systemctl enable pcsd
# systemctl enable corosync
# systemctl enable pacemaker
[root@pg02 ~]# systemctl is-enabled corosync
disabled
[root@pg02 ~]# systemctl is-enabled pcsd
enabled
[root@pg02 ~]# systemctl is-enabled pacemaker
disabled
[root@pg02 ~]#
#
3.设置hacluster用户密码
# echo hacluster|passwd hacluster --stdin
4.集群认证
在任何一个节点上执行:
# pcs cluster auth -u hacluster -p hacluster pg01 pg02 pg03
pg03: Authorized
pg02: Authorized
pg01: Authorized
#
5.同步配置
在任何一个节点上执行:
# pcs cluster setup --last_man_standing=1 --name pgcluster pg01 pg02 pg03
Destroying cluster on nodes: pg01, pg02, pg03...
pg01: Stopping Cluster (pacemaker)...
pg03: Stopping Cluster (pacemaker)...
pg02: Stopping Cluster (pacemaker)...
pg02: Successfully destroyed cluster
pg01: Successfully destroyed cluster
pg03: Successfully destroyed cluster
Sending 'pacemaker_remote authkey' to 'pg01', 'pg02', 'pg03'
pg02: successful distribution of the file 'pacemaker_remote authkey'
pg01: successful distribution of the file 'pacemaker_remote authkey'
pg03: successful distribution of the file 'pacemaker_remote authkey'
Sending cluster config files to the nodes...
pg01: Succeeded
pg02: Succeeded
pg03: Succeeded
Synchronizing pcsd certificates on nodes pg01, pg02, pg03...
pg03: Success
pg02: Success
pg01: Success
Restarting pcsd on the nodes in order to reload the certificates...
pg03: Success
pg02: Success
pg01: Success
#
6、启动集群
在任何一个节点上执行:
# pcs cluster start --all
pg01: Starting Cluster (corosync)...
pg02: Starting Cluster (corosync)...
pg03: Starting Cluster (corosync)...
pg01: Starting Cluster (pacemaker)...
pg03: Starting Cluster (pacemaker)...
pg02: Starting Cluster (pacemaker)...
#
三、install postgresql(pg01 && pg02 && pg03)
1.安装PG
数据库版本：pg 11.x以下版本
# yum install gcc-c++ readline-devel zlib-devel
# tar zxvf postgresql-11.10.tar.gz
# cd postgresql-11.10
# ./configure --prefix=/opt/pgsql/11.10
# make -j 2
# make install
2.配置用户、数据目录(pg01 && pg02 && pg03)
# useradd postgres
# passwd postgres
# vim /home/postgres/.bash_profile
添加：
export PGDATA=/pgdata
export PATH=/opt/pgsql/11.10/bin:$PATH
# mkdir /pgdata
# chown postgres.postgres /pgdata/
# chmod 700 /pgdata/
3.主节点(pg01)
[root@pg01 ~]# su - postgres
[postgres@pg01 ~]$ initdb -D /pgdata/
[postgres@pg01 ~]$ cd /pgdata/
4.配置数据库参数
postgresql.conf
listen_addresses = '*'
wal_level = logical
wal_log_hints = on
max_wal_size = 10GB
min_wal_size = 80MB
checkpoint_completion_target = 0.9
archive_mode = on
archive_command = '/bin/true'
wal_keep_segments = 1000
synchronous_standby_names = ''
hot_standby_feedback = on
logging_collector = on
log_filename = 'postgresql-%a.log'
log_truncate_on_rotation = on
log_rotation_size = 0
log_min_duration_statement = 0
log_checkpoints = on
log_connections = on
log_disconnections = on
log_line_prefix = '%t [%p]: db=%d,user=%u,app=%a,client=%h '
log_lock_waits = on
log_temp_files = 0
log_autovacuum_min_duration = 0
lc_messages = 'en_US.UTF-8'
pg_hba.conf
# TYPE DATABASE USER ADDRESS METHOD
# "local" is for Unix domain socket connections only
local all all trust
# IPv4 local connections:
host all all 127.0.0.1/32 md5
host all all 0.0.0.0/0 md5
# IPv6 local connections:
#host all all ::1/128 trust
# Allow replication connections from localhost, by a user with the
# replication privilege.
local replication all trust
host replication all 127.0.0.1/32 md5
host replication repluser 192.168.43.0/24 md5
5.启动master数据库
[root@pg01 ~]# su - postgres
Last login: Mon Dec 14 11:26:05 CST 2020 on pts/0
[postgres@pg01 ~]$
[postgres@pg01 ~]$ pg_ctl start -D /pgdata/
6.创建复制用户
postgres=# create user repluser with replication password 'repluser';
CREATE ROLE
postgres=# du
List of roles
Role name | Attributes | Member of
-----------+------------------------------------------------------------+-----------
postgres | Superuser, Create role, Create DB, Replication, Bypass RLS | {}
repluser | Replication | {}
postgres=#
6.创建slave(pg02 && pg03)
# su - postgres
$ pg_basebackup -h pg01 -U repluser -p 5432 -D /pgdata --wal-method=stream --checkpoint=fast --progress --verbose
7.停止master(pg01)
[postgres@pg01 pgdata]$ pg_ctl stop -D /pgdata/
waiting for server to shut down.... done
server stopped
[postgres@pg01 pgdata]$ pg_ctl status -D /pgdata/
pg_ctl: no server running
[postgres@pg01 pgdata]$
注意事项：
数据库无需配置自启动，由集群软件自动拉起
四、配置集群
# cat cluster_setup.sh
pcs cluster cib pgsql_cfg
pcs -f pgsql_cfg property set no-quorum-policy="ignore"
pcs -f pgsql_cfg property set stonith-enabled="false"
pcs -f pgsql_cfg resource defaults resource-stickiness="INFINITY"
pcs -f pgsql_cfg resource defaults migration-threshold="3"
#### vip-master ###
pcs -f pgsql_cfg resource create vip-master IPaddr2 ip="192.168.43.10" cidr_netmask="24"
op start timeout="60s" interval="0s" on-fail="restart"
op monitor timeout="60s" interval="10s" on-fail="restart"
op stop timeout="60s" interval="0s" on-fail="block"
#### vip-slave ###
pcs -f pgsql_cfg resource create vip-slave IPaddr2 ip="192.168.43.20" cidr_netmask="24"
op start timeout="60s" interval="0s" on-fail="restart"
op monitor timeout="60s" interval="10s" on-fail="restart"
op stop timeout="60s" interval="0s" on-fail="block"
#### pgsql resource ####
pcs -f pgsql_cfg resource create pgsql pgsql
pgctl="/opt/pgsql/11.10/bin/pg_ctl"
psql="/opt/pgsql/11.10/bin/psql"
pgdata="/pgdata/"
config="/pgdata/postgresql.conf"
rep_mode="sync" node_list="pg01 pg02 pg03" master_ip="192.168.43.10"
repuser="repluser"
primary_conninfo_opt="password=repluser
keepalives_idle=60 keepalives_interval=5 keepalives_count=5"
restart_on_promote='true'
op start timeout="60s" interval="0s" on-fail="restart"
op monitor timeout="60s" interval="4s" on-fail="restart"
op monitor timeout="60s" interval="3s" on-fail="restart" role="Master"
op promote timeout="60s" interval="0s" on-fail="restart"
op demote timeout="60s" interval="0s" on-fail="stop"
op stop timeout="60s" interval="0s" on-fail="block"
#### setting master #####
pcs -f pgsql_cfg resource master pgsql-cluster pgsql master-max=1 master-node-max=1 clone-max=3 clone-node-max=1 notify=true
#### master group #####
pcs -f pgsql_cfg resource group add master-group vip-master
#### slave group #####
pcs -f pgsql_cfg resource group add slave-group vip-slave
#### master group setting #####
pcs -f pgsql_cfg constraint colocation add master-group with master pgsql-cluster INFINITY
pcs -f pgsql_cfg constraint order promote pgsql-cluster then start master-group symmetrical=false score=INFINITY
pcs -f pgsql_cfg constraint order demote pgsql-cluster then stop master-group symmetrical=false score=0
#### slave-group setting #####
pcs -f pgsql_cfg constraint colocation add slave-group with slave pgsql-cluster INFINITY
pcs -f pgsql_cfg constraint order promote pgsql-cluster then start slave-group symmetrical=false score=INFINITY
pcs -f pgsql_cfg constraint order demote pgsql-cluster then stop slave-group symmetrical=false score=0
#### push config ####
pcs cluster cib-push pgsql_cfg
修改集群配置：
# cibadmin --query > tmp.xml
# vi tmp.xml
# cibadmin --replace --xml-file tmp.xml
五、集群状态检查
[root@pg01 ~]# pcs status corosync
Membership information
----------------------
Nodeid Votes Name
1 1 pg01 (local)
2 1 pg02
3 1 pg03
[root@pg01 ~]#
# pcs property list
Cluster Properties:
cluster-infrastructure: corosync
cluster-name: pgcluster
dc-version: 1.1.23-1.el7-9acf116022
have-watchdog: false
no-quorum-policy: ignore
stonith-enabled: false
Node Attributes:
pg01: pgsql-data-status=LATEST
pg02: pgsql-data-status=STREAMING|SYNC
pg03: pgsql-data-status=STREAMING|ASYNC
[root@pg01 ~]#
# pcs resource show
Master/Slave Set: pgsql-cluster [pgsql]
Masters: [ pg02 ]
Slaves: [ pg01 pg03 ]
Resource Group: master-group
vip-master (ocf::heartbeat:IPaddr2): Started pg02
Resource Group: slave-group
vip-slave (ocf::heartbeat:IPaddr2): Started pg03
[root@pg02 ~]#
pcs resource cleanup
//xx表示虚拟资源名称，当集群有资源处于unmanaged的状态时，
可以用这个命令清理掉失败的信息，然后重置资源状态
[root@pg02 ~]# pcs resource cleanup
Cleaned up all resources on all nodes
[root@pg02 ~]#
# pcs status
Cluster name: pgcluster
Stack: corosync
Current DC: pg02 (version 1.1.23-1.el7-9acf116022) - partition with quorum
Last updated: Mon Dec 14 13:26:08 2020
Last change: Mon Dec 14 13:19:49 2020 by root via crm_attribute on pg02
3 nodes configured
5 resource instances configured
Online: [ pg01 pg02 pg03 ]
Full list of resources:
Master/Slave Set: pgsql-cluster [pgsql]
Masters: [ pg02 ]
Slaves: [ pg01 pg03 ]
Resource Group: master-group
vip-master (ocf::heartbeat:IPaddr2): Started pg02
Resource Group: slave-group
vip-slave (ocf::heartbeat:IPaddr2): Started pg03
Daemon Status:
corosync: active/enabled
pacemaker: active/enabled
pcsd: active/enabled
[root@pg03 ~]#
[root@pg01 ~]# crm_mon -Arf -1
Stack: corosync
Current DC: pg01 (version 1.1.23-1.el7-9acf116022) - partition with quorum
Last updated: Mon Dec 14 13:38:05 2020
Last change: Mon Dec 14 13:33:33 2020 by root via crm_attribute on pg01
3 nodes configured
5 resource instances configured
Online: [ pg01 pg02 pg03 ]
Full list of resources:
Master/Slave Set: pgsql-cluster [pgsql]
Masters: [ pg01 ]
Slaves: [ pg02 pg03 ]
Resource Group: master-group
vip-master (ocf::heartbeat:IPaddr2): Started pg01
Resource Group: slave-group
vip-slave (ocf::heartbeat:IPaddr2): Started pg03
Node Attributes:
* Node pg01:
+ master-pgsql : 1000
+ pgsql-data-status : LATEST
+ pgsql-master-baseline : 0000000008000098
+ pgsql-status : PRI
* Node pg02:
+ master-pgsql : -INFINITY
+ pgsql-data-status : STREAMING|ASYNC
+ pgsql-status : HS:async
* Node pg03:
+ master-pgsql : 100
+ pgsql-data-status : STREAMING|SYNC
+ pgsql-status : HS:sync
Migration Summary:
* Node pg01:
* Node pg02:
* Node pg03:
[root@pg01 ~]#
六、问题排查
master宕机启动时，需要删除临时锁文件方可进行集群角色转换
1.查看本机集群状态
[root@pg01 ~]# crm_mon -Arf -1
Stack: corosync
Current DC: pg03 (version 1.1.23-1.el7-9acf116022) - partition with quorum
Last updated: Mon Dec 14 13:39:58 2020
Last change: Mon Dec 14 13:39:02 2020 by root via crm_attribute on pg03
3 nodes configured
5 resource instances configured
Online: [ pg01 pg02 pg03 ]
Full list of resources:
Master/Slave Set: pgsql-cluster [pgsql]
Masters: [ pg03 ]
Slaves: [ pg02 ]
Stopped: [ pg01 ]
Resource Group: master-group
vip-master (ocf::heartbeat:IPaddr2): Started pg03
Resource Group: slave-group
vip-slave (ocf::heartbeat:IPaddr2): Started pg02
Node Attributes:
* Node pg01:
+ master-pgsql : -INFINITY
+ pgsql-data-status : DISCONNECT
+ pgsql-status : STOP
* Node pg02:
+ master-pgsql : 100
+ pgsql-data-status : STREAMING|SYNC
+ pgsql-status : HS:sync
* Node pg03:
+ master-pgsql : 1000
+ pgsql-data-status : LATEST
+ pgsql-master-baseline : 0000000009000098
+ pgsql-status : PRI
Migration Summary:
* Node pg01:
pgsql: migration-threshold=3 fail-count=1000000 last-failure='Mon Dec 14 13:39:47 2020'
* Node pg02:
* Node pg03:
Failed Resource Actions:
* pgsql_start_0 on pg01 'unknown error' (1): call=15, status=complete, exitreason='My data may be inconsistent. You have to remove /var/lib/pgsql/tmp/PGSQL.lock file to force start.',
last-rc-change='Mon Dec 14 13:39:45 2020', queued=0ms, exec=120ms
2.删除PGSQL.lock文件
[root@pg01 ~]# cd /var/lib/pgsql/tmp/
[root@pg01 tmp]# ls
PGSQL.lock rep_mode.conf
[root@pg01 tmp]# rm -rf PGSQL.lock
[root@pg01 tmp]# ll
total 4
-rw-r----- 1 postgres postgres 31 Dec 14 13:39 rep_mode.conf
[root@pg01 tmp]#
[root@pg01 tmp]#
3.检查集群状态
[root@pg01 tmp]# crm_mon -Arf -1
Stack: corosync
Current DC: pg03 (version 1.1.23-1.el7-9acf116022) - partition with quorum
Last updated: Mon Dec 14 13:40:18 2020
Last change: Mon Dec 14 13:39:02 2020 by root via crm_attribute on pg03
3 nodes configured
5 resource instances configured
Online: [ pg01 pg02 pg03 ]
Full list of resources:
Master/Slave Set: pgsql-cluster [pgsql]
Masters: [ pg03 ]
Slaves: [ pg02 ]
Stopped: [ pg01 ]
Resource Group: master-group
vip-master (ocf::heartbeat:IPaddr2): Started pg03
Resource Group: slave-group
vip-slave (ocf::heartbeat:IPaddr2): Started pg02
Node Attributes:
* Node pg01:
+ master-pgsql : -INFINITY
+ pgsql-data-status : DISCONNECT
+ pgsql-status : STOP
* Node pg02:
+ master-pgsql : 100
+ pgsql-data-status : STREAMING|SYNC
+ pgsql-status : HS:sync
* Node pg03:
+ master-pgsql : 1000
+ pgsql-data-status : LATEST
+ pgsql-master-baseline : 0000000009000098
+ pgsql-status : PRI
Migration Summary:
* Node pg01:
pgsql: migration-threshold=3 fail-count=1000000 last-failure='Mon Dec 14 13:39:47 2020'
* Node pg02:
* Node pg03:
Failed Resource Actions:
* pgsql_start_0 on pg01 'unknown error' (1): call=15, status=complete, exitreason='My data may be inconsistent. You have to remove /var/lib/pgsql/tmp/PGSQL.lock file to force start.',
last-rc-change='Mon Dec 14 13:39:45 2020', queued=0ms, exec=120ms
3.重置并刷新集群状态
[root@pg01 tmp]# crm_resource --cleanup
Cleaned up all resources on all nodes
Waiting for 1 reply from the CRMd. OK
4.检查集群状态
[root@pg01 tmp]# crm_mon -Arf -1
Stack: corosync
Current DC: pg03 (version 1.1.23-1.el7-9acf116022) - partition with quorum
Last updated: Mon Dec 14 13:40:40 2020
Last change: Mon Dec 14 13:40:38 2020 by root via crm_attribute on pg03
3 nodes configured
5 resource instances configured
Online: [ pg01 pg02 pg03 ]
Full list of resources:
Master/Slave Set: pgsql-cluster [pgsql]
Masters: [ pg03 ]
Slaves: [ pg01 pg02 ]
Resource Group: master-group
vip-master (ocf::heartbeat:IPaddr2): Started pg03
Resource Group: slave-group
vip-slave (ocf::heartbeat:IPaddr2): Started pg02
Node Attributes:
* Node pg01:
+ master-pgsql : -INFINITY
+ pgsql-data-status : STREAMING|ASYNC
+ pgsql-status : HS:async
* Node pg02:
+ master-pgsql : 100
+ pgsql-data-status : STREAMING|SYNC
+ pgsql-status : HS:sync
* Node pg03:
+ master-pgsql : 1000
+ pgsql-data-status : LATEST
+ pgsql-master-baseline : 0000000009000098
+ pgsql-status : PRI
Migration Summary:
* Node pg01:
* Node pg02:
* Node pg03:
[root@pg01 tmp]#
常用管理命令
临时维护，只用到了以下几个命令
pcs status //查看集群状态
pcs resource show //查看资源
pcs resource create ClusterIP IPaddr2 ip=192.168.0.120 cidr_netmask=32 //创建一个虚拟IP资源
pcs resource cleanup //xx表示虚拟资源名称，当集群有资源处于unmanaged的状态时，可以用这个命令清理掉失败的信息，然后重置资源状态
pcs resource list //查看资源列表
pcs resource restart //重启资源
pcs resource enable //启动资源
pcs resource disable //关闭资源
pcs resource delete //删除资源