The node exporter and tools like iostat and sar use the same core data, but how do they relate to each other?

 

Prometheus metric names tend to tie pretty directly to a raw data source, so node_disk_reads_completed_total is the number of bytes written to a given disk device given by the 1st field of /proc/diskstats. It's reasonably obvious what it means just from the name. iostat -x has output like:

Device: rrqm/s wrqm/s  r/s   w/s rkB/s  wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util
sda       0.00  8.00  0.00 15.00  0.00 342.00    45.60     0.04  2.40    0.00    2.40  0.40  0.60

Here the r/s is the number of reads per second calculated from the previous measurement iostat made (or since boot for the first one). The equivalent is rate(node_disk_reads_completed_total[5m]) in PromQL. Similarly with w/s and node_disk_writes_completed_totalrrqm/s and node_disk_reads_merged_total, and wrqm/s and node_disk_writes_merged_total.

For bandwidth, iostat will report in kilobytes by default. The kernel reports this in 512-sectors (irrelevant of the sector size of the underlying device), and Prometheus uses bytes as standard. So rkB/s and wkB/s would be rate(node_disk_read_bytes_total[5m]) and rate(node_disk_written_bytes_total[5m]) only 1024 times bigger.

avgrq-sz is the average size of each request, combining both read and write. It's calculated by iostat by dividing the bytes by the operations, so
(rate(node_disk_read_bytes_total[5m]) + rate(node_disk_written_bytes_total[5m]))
/
(rate(node_disk_reads_completed_total[5m]) + rate(node_disk_writes_completed_total[5m]))

and once again in bytes rather than kilobytes. Personally I'd rather view reads and writes separately.

avgqu-sz is simpler, the average queue length. This is based on field 11, which gives us rate(node_disk_io_time_weighted_seconds_total[5m]).

r_await and w_await are how long read and write requests took on average, so for reads that's rate(node_disk_read_time_seconds_total[5m]) / rate(node_disk_reads_completed_total[5m])and similarly for writes. await is both combined, so you can add and then divide if you want it.

%util is utilisation as a percentage, rate(node_disk_io_time_seconds_total[5m]) will produce the same as a ratio which is more standard in Prometheus. svctm is deprecated, but it'd be the IO time divided by the sum of the reads and writes completed.

There one other notable metric which iostat doesn't expose which is field 9, node_disk_io_now the number of IOs in progress. Newer kernels will also expose discard stats, useful for SSDs.