zoukankan      html  css  js  c++  java
  • Linux centos6.7网卡配置

    系统安装完成后

    以此执行以下命令 相当于自动获取IP地址

    setup命令——Network configuration———Device configuration———eth0 依次保存退出

    实际上就是修改    /etc/sysconfig/network-scripts/ifcfg-eth0   的内容

    TYPE=Ethernet

    UUID=8f317ed7-9c85-4a67-bd89-a2b30ff86517

    ONBOOT=yes

    NM_CONTROLLED=no

    BOOTPROTO=dhcp

    USERCTL=no

    PEERDNS=yes

    IPV6INIT=no

    一条命令修改ONBOOT=no

    sed –I ‘s#ONB00T=no#ONBOOT=yes#g’ /etc/sysconfig/network-scripts/ifcfg-eth0

    网卡重启 service network restart

    关闭:ifdown eth0  开启:ifup eth0

    期间我克隆了一个虚拟机  上述操作完成后 发现怎么都重启不了网卡,网上查了一些资料最后成功了 方法如下:

    故障现象:

    service network restart
    Shutting down loopback insterface:                                                                                                     [  OK  ]
    Bringing up loopback insterface:                                                                                                          [  OK  ]
    Bringing up interface eth0:  Device eth0 does not seem to be present,delaying initialization.                    [FAILED]

    CentOS Linux解决Device eth0 does not seem to be present

    解决办法:

    首先,打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示:

    # vi /etc/udev/rules.d/70-persistent-net.rules
    # This file was automatically generated by the /lib/udev/write_net_rules
    # program, run by the persistent-net-generator.rules rules file.
    #
    # You can modify it, as long as you keep each rule on a single
    # line, and change only the value of the NAME= key.
    # PCI device 0x1022:0x2000 (pcnet32)
    SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:8f:89:9
    7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
    # PCI device 0x1022:0x2000 (pcnet32)
    SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:50:bd:1
    7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"

    记录下,eth1网卡的mac地址00:0c:29:50:bd:17

    接下来,打开/etc/sysconfig/network-scripts/ifcfg-eth0

    # vi /etc/sysconfig/network-scripts/ifcfg-eth0

    将 DEVICE="eth0"  改成  DEVICE="eth1"  ,
    将 HWADDR="00:0c:29:8f:89:97" 改成上面的mac地址  HWADDR="00:0c:29:50:bd:17"

    最后,重启网络

    # service network restart
    或者

    # /etc/init.d/network restart

    正常了。

  • 相关阅读:
    输入一个nxn矩阵各元素的值,球出两条对角线元素之和
    打印杨辉三角
    编写一个函数,实现两个字符串的连接功能
    字符串置换。将字符串s中的出现的字符s1用字符s2置换
    有一行文字,要求删去其中某个字符
    自定义函数delstr()的功能是删去字符串s1中所有的"*"
    用微软的kestrel在Linux上利用Apache架设Asp.Net Core环境
    2012年8月14日 星期二 equals()方法 (冲突备份)
    jquery 操作DOM 案例
    FileUpload 控件上传图片和文件
  • 原文地址:https://www.cnblogs.com/Mr-wx/p/8747581.html
Copyright © 2011-2022 走看看