zoukankan      html  css  js  c++  java
  • cisco/CCNA思科静态路由配置(附PKA文件)

    在所有的路由器上添加静态路由。

    能够在小型的网络环境中配置路由表。

    能够使用ping测试静态路由配置

    使用Tracert跟踪数据包

    排除网络故障

    删除在Router3上删除到172.16.0.0/24网段的路由信息

    PKA文件下载地址:https://zhifubao.lanzous.com/iRFs5dibjja

    2 网络拓扑

     

    3 基本配置步骤

    试验环境应经将路由器的所有接口和计算机的Ip地址已经按着网络拓扑配置。

    只需在路由器上添加静态路由表即可。

    3.1 在Router2上

     1 Router#show ip route    查看现有的路由表,发现只有直连的网段的路由信息
     2 Router#config t
     3 Router(config)#ip route 172.16.1.0 255.255.255.0 172.16.3.2
     4 Router(config)#ip route 172.16.4.0 255.255.255.0 172.16.3.2
     5 Router(config)#ip route 172.16.5.0 255.255.255.0 172.16.3.2
     6 Router(config)#ip route 172.16.2.0 255.255.255.0 172.16.3.2
     7 Router#show ip route 
     8 Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
     9        D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
    10        N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
    11        E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
    12        i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
    13        * - candidate default, U - per-user static route, o - ODR
    14        P - periodic downloaded static route
    15 Gateway of last resort is not set
    16      172.16.0.0/24 is subnetted, 6 subnets
    17 C       172.16.0.0 is directly connected, FastEthernet0/0    C 直连的网络
    18 S       172.16.1.0 [1/0] via 172.16.3.2    S 添加的静态路由
    19 S       172.16.2.0 [1/0] via 172.16.3.2
    20 C       172.16.3.0 is directly connected, Serial2/0
    21 S       172.16.4.0 [1/0] via 172.16.3.2
    22 S       172.16.5.0 [1/0] via 172.16.3.2
    23 Router#copy running-config startup-config 
    24 Destination filename [startup-config]? 
    25 Building configuration...
    26 [OK]

    3.2 在Router3上添加静态路由

     1 Router#config t
     2 Router(config)#ip route 172.16.0.0 255.255.255.0 172.16.4.2
     3 Router(config)#ip route 172.16.3.0 255.255.255.0 172.16.4.2
     4 Router(config)#ip route 172.16.2.0 255.255.255.0 172.16.4.2
     5 Router(config)#ip route 172.16.5.0 255.255.255.0 172.16.4.2
     6 Router(config)#exit
     7 %SYS-5-CONFIG_I: Configured from console by console
     8 Router#show ip rout                         显示路由表
     9 Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
    10        D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
    11        N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
    12        E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
    13        i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
    14        * - candidate default, U - per-user static route, o - ODR
    15        P - periodic downloaded static route
    16 Gateway of last resort is not set
    17      172.16.0.0/24 is subnetted, 6 subnets
    18 S       172.16.0.0 [1/0] via 172.16.4.2
    19 C       172.16.1.0 is directly connected, FastEthernet0/0
    20 S       172.16.2.0 [1/0] via 172.16.4.2
    21 S       172.16.3.0 [1/0] via 172.16.4.2
    22 C       172.16.4.0 is directly connected, Serial2/0
    23 S       172.16.5.0 [1/0] via 172.16.4.2
    24 Router#copy running-config startup-config 
    25 Destination filename [startup-config]? 
    26 Building configuration...

    3.3 在Router0上添加静态路由

     1 Router#config t
     2 Enter configuration commands, one per line.  End with CNTL/Z.
     3 Router(config)#ip route 172.16.0.0 255.255.255.0 172.16.3.1
     4 Router(config)#ip route 172.16.1.0 255.255.255.0 172.16.4.1
     5 Router(config)#ip route 172.16.2.0 255.255.255.0 172.16.5.2
     6 Router(config)#
     7 Router#copy running-config startup-config 
     8 Destination filename [startup-config]? 
     9 Building configuration...
    10 [OK]

    3.4 在Router1上添加静态路由

     1 Router#configure 
     2 Configuring from terminal, memory, or network [terminal]? 
     3 Enter configuration commands, one per line.  End with CNTL/Z.
     4 Router(config)#ip route 172.16.0.0 255.255.255.0 172.16.5.1
     5 Router(config)#ip route 172.16.1.0 255.255.255.0 172.16.5.1
     6 Router(config)#ip route 172.16.3.0 255.255.255.0 172.16.5.1
     7 Router(config)#ip route 172.16.4.0 255.255.255.0 172.16.5.1
     8 Router#copy running-config startup-config 
     9 Destination filename [startup-config]? 
    10 Building configuration...
    11 [OK]

    4 测试静态路由

    4.1 在PC1上测试到PC0的连接

     1 PC>ping 172.16.1.1                  静态路由配置正确
     2 Pinging 172.16.1.1 with 32 bytes of data:
     3 Reply from 172.16.1.1: bytes=32 time=27ms TTL=253
     4 Reply from 172.16.1.1: bytes=32 time=14ms TTL=253
     5 Reply from 172.16.1.1: bytes=32 time=20ms TTL=253
     6 Reply from 172.16.1.1: bytes=32 time=16ms TTL=253
     7 PC>tracert 172.16.1.2    使用Tracert跟踪数据包
     8 Tracing route to 172.16.1.2 over a maximum of 30 hops: 
     9   1   9 ms      6 ms      8 ms      172.16.0.1
    10   2   13 ms     10 ms     10 ms     172.16.3.2
    11   3   17 ms     16 ms     16 ms     172.16.4.1
    12   4   23 ms     24 ms     25 ms     172.16.1.2
    13 Trace complete.

    4.2 在PC1上测试到PC2的连接

    1 PC>ping 172.16.2.1                 静态路由配置正确
    2 Pinging 172.16.2.1 with 32 bytes of data:
    3 Reply from 172.16.2.1: bytes=32 time=15ms TTL=253
    4 Reply from 172.16.2.1: bytes=32 time=13ms TTL=253
    5 Reply from 172.16.2.1: bytes=32 time=16ms TTL=253
    6 Reply from 172.16.2.1: bytes=32 time=19ms TTL=253

    4.3 在Router3上删除到172.16.0.0/24网段的路由

     1 Router(config)#no ip route 172.16.0.0 255.255.255.0
     2 Router#show ip route 
     3 Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
     4        D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
     5        N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
     6        E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
     7        i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
     8        * - candidate default, U - per-user static route, o - ODR
     9        P - periodic downloaded static route
    10 Gateway of last resort is not set
    11      172.16.0.0/24 is subnetted, 5 subnets
    12 C       172.16.1.0 is directly connected, FastEthernet0/0
    13 S       172.16.2.0 [1/0] via 172.16.4.2
    14 S       172.16.3.0 [1/0] via 172.16.4.2
    15 C       172.16.4.0 is directly connected, Serial2/0
    16 S       172.16.5.0 [1/0] via 172.16.4.2         没有到172.16.0.0/24网段的路由信息

    4.4 在PC1上测试到PC0的连接  发现数据包不能返回

     1 PC>ping 172.16.1.1
     2 
     3 Pinging 172.16.1.1 with 32 bytes of data:
     4 
     5 Request timed out.
     6 
     7 Request timed out.
     8 
     9 Request timed out.
    10 
    11 Request timed out.
    12 
    13 PC>tracert 172.16.1.2                                                     使用tracert跟踪数据包路径
    14 
    15 Tracing route to 172.16.1.2 over a maximum of 30 hops:
    16 
    17   1   9 ms      7 ms      8 ms      172.16.0.1
    18 
    19   2   12 ms     14 ms     14 ms     172.16.3.2
    20 
    21   3   *         *         *         Request timed out.
    22 
    23   4   *         *         *         Request timed out.
    24 
    25   5   *         *         *         Request timed out.

    4.5 在PC0上测试到PC1的连接

     1 PC>ping 172.16.0.2
     2 
     3 Pinging 172.16.0.2 with 32 bytes of data:
     4 
     5 Reply from 172.16.1.1: Destination host unreachable.                   提示目标主机不可到达
     6 
     7 Reply from 172.16.1.1: Destination host unreachable.
     8 
     9 Reply from 172.16.1.1: Destination host unreachable.
    10 
    11 Reply from 172.16.1.1: Destination host unreachable.
  • 相关阅读:
    图片自动播放
    选项卡切换
    jquery实现全选、反选、不选
    JQuery $()后面的括号里的内容什么时候加引号,什么时候不加
    ajax跨域jsonp
    加班与效率
    提问的智慧
    程序员要勇于说不
    编程从业五年的十四条经验,句句朴实
    成为高效程序员的7个重要习惯
  • 原文地址:https://www.cnblogs.com/aimilu/p/13082014.html
Copyright © 2011-2022 走看看