zoukankan      html  css  js  c++  java
  • apache httpd.conf 配置信息

    #
    # This is the main Apache HTTP server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
    # In particular, see
    # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
    # for a discussion of each configuration directive.
    #
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    #
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "C:/www/apache2" will be interpreted by the
    # server as "C:/www/apache2/logs/foo.log".
    #
    # NOTE: Where filenames are specified, you must use forward slashes
    # instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
    # If a drive letter is omitted, the drive on which httpd.exe is located
    # will be used by default. It is recommended that you always supply
    # an explicit drive letter in absolute paths to avoid confusion.

    #
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    #
    # Do not add a slash at the end of the directory path. If you point
    # ServerRoot at a non-local disk, be sure to point the LockFile directive
    # at a local disk. If you wish to share the same ServerRoot for multiple
    # httpd daemons, you will need to change at least LockFile and PidFile.
    # apache 设置服务器目录的绝对路径
    ServerRoot "C:/www/apache2"

    #
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    #
    # Change this to Listen on specific IP addresses as shown below to
    # prevent Apache from glomming onto all bound IP addresses.
    #
    #Listen 12.34.56.78:80
    #apache监听端口
    Listen 80

    #
    # Dynamic Shared Object (DSO) Support
    #
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    #
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    # 载入的相关组件模块
    LoadModule actions_module modules/mod_actions.so
    LoadModule alias_module modules/mod_alias.so
    LoadModule asis_module modules/mod_asis.so
    LoadModule auth_basic_module modules/mod_auth_basic.so
    #LoadModule auth_digest_module modules/mod_auth_digest.so
    #LoadModule authn_alias_module modules/mod_authn_alias.so
    #LoadModule authn_anon_module modules/mod_authn_anon.so
    #LoadModule authn_dbd_module modules/mod_authn_dbd.so
    #LoadModule authn_dbm_module modules/mod_authn_dbm.so
    LoadModule authn_default_module modules/mod_authn_default.so
    LoadModule authn_file_module modules/mod_authn_file.so
    #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
    #LoadModule authz_dbm_module modules/mod_authz_dbm.so
    LoadModule authz_default_module modules/mod_authz_default.so
    LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
    LoadModule authz_host_module modules/mod_authz_host.so
    #LoadModule authz_owner_module modules/mod_authz_owner.so
    LoadModule authz_user_module modules/mod_authz_user.so
    LoadModule autoindex_module modules/mod_autoindex.so
    #LoadModule cache_module modules/mod_cache.so
    #LoadModule cern_meta_module modules/mod_cern_meta.so
    LoadModule cgi_module modules/mod_cgi.so
    #LoadModule charset_lite_module modules/mod_charset_lite.so
    #LoadModule dav_module modules/mod_dav.so
    #LoadModule dav_fs_module modules/mod_dav_fs.so
    #LoadModule dav_lock_module modules/mod_dav_lock.so
    #LoadModule dbd_module modules/mod_dbd.so
    #LoadModule deflate_module modules/mod_deflate.so
    LoadModule dir_module modules/mod_dir.so
    #LoadModule disk_cache_module modules/mod_disk_cache.so
    #LoadModule dumpio_module modules/mod_dumpio.so
    LoadModule env_module modules/mod_env.so
    #LoadModule expires_module modules/mod_expires.so
    #LoadModule ext_filter_module modules/mod_ext_filter.so
    #LoadModule file_cache_module modules/mod_file_cache.so
    #LoadModule filter_module modules/mod_filter.so
    #LoadModule headers_module modules/mod_headers.so
    #LoadModule ident_module modules/mod_ident.so
    #LoadModule imagemap_module modules/mod_imagemap.so
    LoadModule include_module modules/mod_include.so
    #LoadModule info_module modules/mod_info.so
    LoadModule isapi_module modules/mod_isapi.so
    #LoadModule ldap_module modules/mod_ldap.so
    #LoadModule logio_module modules/mod_logio.so
    LoadModule log_config_module modules/mod_log_config.so
    #LoadModule log_forensic_module modules/mod_log_forensic.so
    #LoadModule mem_cache_module modules/mod_mem_cache.so
    LoadModule mime_module modules/mod_mime.so
    #LoadModule mime_magic_module modules/mod_mime_magic.so
    LoadModule negotiation_module modules/mod_negotiation.so
    #LoadModule proxy_module modules/mod_proxy.so
    #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
    #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
    #LoadModule proxy_connect_module modules/mod_proxy_connect.so
    #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
    #LoadModule proxy_http_module modules/mod_proxy_http.so
    #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
    #LoadModule reqtimeout_module modules/mod_reqtimeout.so
    #LoadModule rewrite_module modules/mod_rewrite.so
    LoadModule setenvif_module modules/mod_setenvif.so
    #LoadModule speling_module modules/mod_speling.so
    #LoadModule ssl_module modules/mod_ssl.so
    #LoadModule status_module modules/mod_status.so
    #LoadModule substitute_module modules/mod_substitute.so
    #LoadModule unique_id_module modules/mod_unique_id.so
    #LoadModule userdir_module modules/mod_userdir.so
    #LoadModule usertrack_module modules/mod_usertrack.so
    #LoadModule version_module modules/mod_version.so
    #LoadModule vhost_alias_module modules/mod_vhost_alias.so
    # 载入php的模块
    LoadModule php5_module "C:/www/php54/php5apache2_2.dll"
    # 设置php配置文件路径
    PHPIniDir "C:/www/php54"

    # 载入php的模块
    #LoadModule php5_module "C:/www/php-5.2.17-Win32-VC6-x86/php5apache2_2.dll"
    # 设置php配置文件路径
    #PHPIniDir "C:/www/php-5.2.17-Win32-VC6-x86"

    # 设置子进程的用户和组 <IfModule test>...</IfModule>配置段用于封装根据指定的模块是否启用而决定是否生效的指令。在<IfModule>配置段中的指令仅当test为真的时候才进行处理。如果test为假,所有其间的指令都将被忽略
    <IfModule !mpm_netware_module>
    <IfModule !mpm_winnt_module>
    #
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.
    #
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # It is usually good practice to create a dedicated user and group for
    # running httpd, as with most system services.
    #
    # 设置实际提供服务的子进程的用户
    User daemon
    # 设置提供服务的apache子进程运行时的用户组
    Group daemon

    </IfModule>
    </IfModule>

    # 'Main' server configuration
    #
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    #
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    #

    #
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents. e.g. admin@your-domain.com
    # 设置在返回给客户端的错误信息中包含的管理员邮件地址
    ServerAdmin jiaongtian@163.com

    #
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    #
    # If your host doesn't have a registered DNS name, enter its IP address here.
    # 设置服务器用于辨识自己的主机名和端口号
    #ServerName www.php100.com:80

    #
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    # 设置web文档的根目录,默认存放网页位置
    DocumentRoot "D:/web"

    #
    # Each directory to which Apache has access can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    #
    # First, we configure the "default" to be a very restrictive set of
    # features.
    # 路径浏览权限 封装一组指令,使之仅对文件空间中的某个目录及其子目录生效
    <Directory />
    # Options 参数 None 不启用任何额外特性 All 除MultiViews外全部启用 Indexs 启用目录浏览 Includes 允许使用mod_include提供的服务器端包含 FollowSymLinks 服务器允许在此目录中使用符号链接
    Options FollowSymLinks
    # AllowOverride 确定是否允许htaccess文件 All None
    AllowOverride None
    # Order 设置允许和禁止的顺序 allow form all/ip/ip范围 deny 一样用于控制访问
    Order deny,allow
    Deny from all
    </Directory>

    #
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    #

    #
    # This should be changed to whatever you set DocumentRoot to.
    # 总的权限目录
    <Directory "D:/">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important. Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    # Options FileInfo AuthConfig Limit
    # 完全禁用.htaccess文件
    AllowOverride None

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all

    </Directory>

    #
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    # 指令用于指令目录中默认的索引文件名称
    <IfModule dir_module>
    DirectoryIndex index.html index.htm index.php
    </IfModule>

    #
    # The following lines prevent .htaccess and .htpasswd files from being
    # viewed by Web clients.
    # 伪静态之类配置
    <FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
    </FilesMatch>

    #
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    # 错误日志
    ErrorLog "logs/error.log"

    #
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    #
    LogLevel warn

    <IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
    # You need to enable mod_logio.c to use %I and %O
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog "logs/access.log" common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog "logs/access.log" combined
    </IfModule>

    <IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.php100.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL. You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client. The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "C:/www/apache2/cgi-bin/"

    </IfModule>

    <IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock logs/cgisock
    </IfModule>

    #
    # "C:/www/apache2/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    #
    <Directory "C:/www/apache2/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>

    #
    # DefaultType: the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    #
    DefaultType text/plain

    <IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig conf/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    # 增加文件类型
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    AddType application/x-httpd-php .php

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    #AddHandler cgi-script .cgi

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
    </IfModule>

    #
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #
    #MIMEMagicFile conf/magic

    #
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    # 错误提示页
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http://www.php100.com/subscription_info.html
    #

    #
    # MaxRanges: Maximum number of Ranges in a request before
    # returning the entire resource, or one of the special
    # values 'default', 'none' or 'unlimited'.
    # Default setting is to accept 200 Ranges.
    #MaxRanges unlimited

    #
    # EnableMMAP and EnableSendfile: On systems that support it,
    # memory-mapping or the sendfile syscall is used to deliver
    # files. This usually improves server performance, but must
    # be turned off when serving from networked-mounted
    # filesystems or if support for these functions is otherwise
    # broken on your system.
    #
    #EnableMMAP off
    #EnableSendfile off

    # Supplemental configuration
    #
    # The configuration files in the conf/extra/ directory can be
    # included to add extra features or to modify the default configuration of
    # the server, or you may simply copy their contents here and change as
    # necessary.

    # Server-pool management (MPM specific)
    #Include conf/extra/httpd-mpm.conf

    # Multi-language error messages
    #Include conf/extra/httpd-multilang-errordoc.conf

    # Fancy directory listings
    #Include conf/extra/httpd-autoindex.conf

    # Language settings
    #Include conf/extra/httpd-languages.conf

    # User home directories
    #Include conf/extra/httpd-userdir.conf

    # Real-time info on requests and configuration
    #Include conf/extra/httpd-info.conf

    # Virtual hosts
    Include conf/extra/httpd-vhosts.conf

    # Local access to the Apache HTTP Server Manual
    #Include conf/extra/httpd-manual.conf

    # Distributed authoring and versioning (WebDAV)
    #Include conf/extra/httpd-dav.conf

    # Various default settings
    #Include conf/extra/httpd-default.conf

    # Secure (SSL/TLS) connections
    #Include conf/extra/httpd-ssl.conf
    #
    # Note: The following must must be present to support
    # starting without SSL on platforms with no /dev/random equivalent
    # but a statically compiled-in mod_ssl.
    #
    <IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    </IfModule>

    # 附加配置文件详解:
    # httpd-mpm.conf #此指令附加多路由处理模块MPM配置文件
    # httpd-multilang-errordoc.conf #此指令附加多语言错误应答的辅配置文件
    # httpd-autoindex.conf #此指令附加目录列表的辅配置文件
    # httpd-languages.conf #此指令附加语言支持的辅配置文件
    # httpd-userdir.conf #此指令附加用户主目录的辅配置文件
    # httpd-info.conf #用于服务器信息和状态显示的辅配置文件
    # httpd-vhosts.conf #此指令附加虚拟主机的辅配置文件
    # httpd-manual.conf #此指令附加提供apache文档访问的文件
    # httpd-dav.conf #此指令附加DAV的辅配置文件
    # httpd-default.conf #此指令附加与apache服务自身相关的文件
    # httpd-ssl.conf #此指令附加SSL模块的辅配置文件


    # 容器配置段
    # <Directory></Directory> 封装一组指令,使之仅对文件空间中的某个目录及其子目录生效
    # <Files></Files> 包含作用于匹配指定文件名的指令
    # <Location></Location> 将封装的指令作用于匹配的URL
    # <VirtualHost></VirtualHost> 包含仅作用于指定主机名或IP地址的指令

    # 匹配符 * 匹配任何字符串 ? 匹配任何单个字符 [adf] 匹配adf序列中任何字符 / 不被任何通配符所匹配
    # ? : 三元运算符
    # Alias name name222 设定name222的别名

  • 相关阅读:
    父子进程 signal 出现 Interrupted system call 问题
    一个测试文章
    《淘宝客户端 for Android》项目实战 html webkit android css3
    Django 中的 ForeignKey ContentType GenericForeignKey 对应的数据库结构
    coreseek 出现段错误和Unigram dictionary load Error 新情况(Gentoo)
    一个 PAM dbus 例子
    漫画统计学 T分数
    解决 paramiko 安装问题 Unable to find vcvarsall.bat
    20141202
    js
  • 原文地址:https://www.cnblogs.com/caps/p/2941754.html
Copyright © 2011-2022 走看看