rtd1296 mtd 设备驱动分析

mtd 分区一般采用3种方式实现

1、内核写死  mtd_partition

2、u-boot 传参

为了使kernel能够解析mtdparts信息，我们需要将内核中的Device Drivers -> Memory Technology Device (MTD) support ->Command line partition table parsing选项开启

3、dts 传参

1296的实现方式是u-boot传参

linux 调用 parse_mtd_partitions （注意part_probes参数）和 add_mtd_partitions实现

具体代码如下：linux-4.4.18/drivers/mtd$ vi chips/rtk_sfc.c  

static const char * const part_probes[] = { "cmdlinepart", "RedBoot", NULL };

#ifdef CONFIG_MTD_CMDLINE_PARTS
    printk("[%s]descriptor size 0x%x ",__FUNCTION__,(unsigned int)descriptor.size);
    nr_parts = parse_mtd_partitions(&descriptor, part_probes, &parts, 0);
#endif

    if(nr_parts <= 0) {
        printk(KERN_NOTICE "Rtk SFC: using single partition ");
        if(add_mtd_device(&descriptor)) {
            printk(KERN_WARNING "Rtk SFC: (for SST/SPANSION/MXIC/WINBOND SPI-Flash) Failed to register new device ");
            return -EAGAIN;
        }
    }
    else {
         printk(KERN_NOTICE "Rtk SFC: using dynamic partition ");
         add_mtd_partitions(&descriptor, parts, nr_parts);
    }

另外，发现rtd1296会多一个disc分区，原来是他修改了add_mtd_partitions函数，把整个设备作为一个完整的分区添加了。

代码如下：

linux-4.4.18/drivers/mtd$ vi mtdpart.c

add_mtd_partitions函数最后：

//#ifdef CONFIG_MTD_NAND_DISC
#if defined(CONFIG_ARCH_RTD129X) || defined(CONFIG_ARCH_RTD119X)
        struct mtd_partition partDISC = {0};

        // The name that represents the whole MTD Flash device
        partDISC.name = "disc";
        partDISC.size = master->size;
        partDISC.offset = 0;
        slave = allocate_partition(master, &partDISC, nbparts, 0);
        if (IS_ERR(slave))
                return PTR_ERR(slave);

        mutex_lock(&mtd_partitions_mutex);
        list_add(&slave->list, &mtd_partitions);
        mutex_unlock(&mtd_partitions_mutex);

        add_mtd_device(&slave->mtd);
#endif