zoukankan      html  css  js  c++  java
  • OpenStack local.conf

    # Sample ``local.conf`` for user-configurable variables in ``stack.sh``
    
    # NOTE: Copy this file to the root DevStack directory for it to work properly.
    
    # ``local.conf`` is a user-maintained settings file that is sourced from ``stackrc``.
    # This gives it the ability to override any variables set in ``stackrc``.
    # Also, most of the settings in ``stack.sh`` are written to only be set if no
    # value has already been set; this lets ``local.conf`` effectively override the
    # default values.
    
    # This is a collection of some of the settings we have found to be useful
    # in our DevStack development environments. Additional settings are described
    # in http://devstack.org/local.conf.html
    # These should be considered as samples and are unsupported DevStack code.
    
    # The ``localrc`` section replaces the old ``localrc`` configuration file.
    # Note that if ``localrc`` is present it will be used in favor of this section.
    [[local|localrc]]
    
    # Minimal Contents
    # ----------------
    
    # While ``stack.sh`` is happy to run without ``localrc``, devlife is better when
    # there are a few minimal variables set:
    
    # If the ``SERVICE_TOKEN`` and ``*_PASSWORD`` variables are not set
    # here you will be prompted to enter values for them by ``stack.sh``
    # and they will be added to ``local.conf``.
    SERVICE_TOKEN=azertytoken
    ADMIN_PASSWORD=nomoresecrete
    MYSQL_PASSWORD=stackdb
    RABBIT_PASSWORD=stackqueue
    SERVICE_PASSWORD=$ADMIN_PASSWORD
    
    # ``HOST_IP`` and ``HOST_IPV6`` should be set manually for best results if
    # the NIC configuration of the host is unusual, i.e. ``eth1`` has the default
    # route but ``eth0`` is the public interface.  They are auto-detected in
    # ``stack.sh`` but often is indeterminate on later runs due to the IP moving
    # from an Ethernet interface to a bridge on the host. Setting it here also
    # makes it available for ``openrc`` to include when setting ``OS_AUTH_URL``.
    # Neither is set by default.
    #HOST_IP=w.x.y.z
    #HOST_IPV6=2001:db8::7
    
    
    # Logging
    # -------
    
    # By default ``stack.sh`` output only goes to the terminal where it runs.  It can
    # be configured to additionally log to a file by setting ``LOGFILE`` to the full
    # path of the destination log file.  A timestamp will be appended to the given name.
    LOGFILE=$DEST/logs/stack.sh.log
    
    # Old log files are automatically removed after 7 days to keep things neat.  Change
    # the number of days by setting ``LOGDAYS``.
    LOGDAYS=2
    
    # Nova logs will be colorized if ``SYSLOG`` is not set; turn this off by setting
    # ``LOG_COLOR`` false.
    #LOG_COLOR=False
    
    
    # Using milestone-proposed branches
    # ---------------------------------
    
    # Uncomment these to grab the milestone-proposed branches from the repos:
    #CINDER_BRANCH=milestone-proposed
    #GLANCE_BRANCH=milestone-proposed
    #HORIZON_BRANCH=milestone-proposed
    #KEYSTONE_BRANCH=milestone-proposed
    #KEYSTONECLIENT_BRANCH=milestone-proposed
    #NOVA_BRANCH=milestone-proposed
    #NOVACLIENT_BRANCH=milestone-proposed
    #NEUTRON_BRANCH=milestone-proposed
    #SWIFT_BRANCH=milestone-proposed
    
    
    # Swift
    # -----
    
    # Swift is now used as the back-end for the S3-like object store. If Nova's
    # objectstore (``n-obj`` in ``ENABLED_SERVICES``) is enabled, it will NOT
    # run if Swift is enabled. Setting the hash value is required and you will
    # be prompted for it if Swift is enabled so just set it to something already:
    SWIFT_HASH=66a3d6b56c1f479c8b4e70ab5c2000f5
    
    # For development purposes the default of 3 replicas is usually not required.
    # Set this to 1 to save some resources:
    SWIFT_REPLICAS=1
    
    # The data for Swift is stored by default in (``$DEST/data/swift``),
    # or (``$DATA_DIR/swift``) if ``DATA_DIR`` has been set, and can be
    # moved by setting ``SWIFT_DATA_DIR``. The directory will be created
    # if it does not exist.
    SWIFT_DATA_DIR=$DEST/data
    
    # Tempest
    # -------
    
    # Install the tempest test suite
    enable_service tempest
    # Sample ``local.conf`` for user-configurable variables in ``stack.sh``
    
    # NOTE: Copy this file to the root DevStack directory for it to work properly.
    
    # ``local.conf`` is a user-maintained settings file that is sourced from ``stackrc``.
    # This gives it the ability to override any variables set in ``stackrc``.
    # Also, most of the settings in ``stack.sh`` are written to only be set if no
    # value has already been set; this lets ``local.conf`` effectively override the
    # default values.
    
    # This is a collection of some of the settings we have found to be useful
    # in our DevStack development environments. Additional settings are described
    # in http://devstack.org/local.conf.html
    # These should be considered as samples and are unsupported DevStack code.
    
    # The ``localrc`` section replaces the old ``localrc`` configuration file.
    # Note that if ``localrc`` is present it will be used in favor of this section.
    [[local|localrc]]
    
    # Minimal Contents
    # ----------------
    
    # While ``stack.sh`` is happy to run without ``localrc``, devlife is better when
    # there are a few minimal variables set:
    
    # If the ``SERVICE_TOKEN`` and ``*_PASSWORD`` variables are not set
    # here you will be prompted to enter values for them by ``stack.sh``
    # and they will be added to ``local.conf``.
    ADMIN_PASSWORD=123456
    MYSQL_PASSWORD=$ADMIN_PASSWORD
    RABBIT_PASSWORD=$ADMIN_PASSWORD
    SERVICE_PASSWORD=$ADMIN_PASSWORD
    SERVICE_TOKEN=$ADMIN_PASSWORD
    
    # ``HOST_IP`` and ``HOST_IPV6`` should be set manually for best results if
    # the NIC configuration of the host is unusual, i.e. ``eth1`` has the default
    # route but ``eth0`` is the public interface.  They are auto-detected in
    # ``stack.sh`` but often is indeterminate on later runs due to the IP moving
    # from an Ethernet interface to a bridge on the host. Setting it here also
    # makes it available for ``openrc`` to include when setting ``OS_AUTH_URL``.
    # Neither is set by default.
    HOST_IP=192.168.98.110
    #HOST_IPV6=2001:db8::7
    
    
    # Logging
    # -------
    
    # By default ``stack.sh`` output only goes to the terminal where it runs.  It can
    # be configured to additionally log to a file by setting ``LOGFILE`` to the full
    # path of the destination log file.  A timestamp will be appended to the given name.
    LOGFILE=$DEST/logs/stack.sh.log
    
    # Old log files are automatically removed after 7 days to keep things neat.  Change
    # the number of days by setting ``LOGDAYS``.
    LOGDAYS=2
    
    # Nova logs will be colorized if ``SYSLOG`` is not set; turn this off by setting
    # ``LOG_COLOR`` false.
    #LOG_COLOR=False
    
    
    # Using milestone-proposed branches
    # ---------------------------------
    
    # Uncomment these to grab the milestone-proposed branches from the repos:
    #CINDER_BRANCH=milestone-proposed
    #GLANCE_BRANCH=milestone-proposed
    #HORIZON_BRANCH=milestone-proposed
    #KEYSTONE_BRANCH=milestone-proposed
    #KEYSTONECLIENT_BRANCH=milestone-proposed
    #NOVA_BRANCH=milestone-proposed
    #NOVACLIENT_BRANCH=milestone-proposed
    #NEUTRON_BRANCH=milestone-proposed
    #SWIFT_BRANCH=milestone-proposed
    
    
    # Swift
    # -----
    
    # Swift is now used as the back-end for the S3-like object store. If Nova's
    # objectstore (``n-obj`` in ``ENABLED_SERVICES``) is enabled, it will NOT
    # run if Swift is enabled. Setting the hash value is required and you will
    # be prompted for it if Swift is enabled so just set it to something already:
    SWIFT_HASH=66a3d6b56c1f479c8b4e70ab5c2000f5
    
    # For development purposes the default of 3 replicas is usually not required.
    # Set this to 1 to save some resources:
    SWIFT_REPLICAS=1
    
    # The data for Swift is stored by default in (``$DEST/data/swift``),
    # or (``$DATA_DIR/swift``) if ``DATA_DIR`` has been set, and can be
    # moved by setting ``SWIFT_DATA_DIR``. The directory will be created
    # if it does not exist.
    SWIFT_DATA_DIR=$DEST/data
    
    # Tempest
    # -------
    
    # Install the tempest test suite
    enable_service tempest
    
    # Enable Heat
    enable_service heat h-api h-api-cfn h-api-cw h-eng
    
    # Enable Murano
    enable_service murano murano-api murano-engine
  • 相关阅读:
    ABAP接口用法
    监听textarea数值变化
    The first step in solving any problem is recognizing there is one.
    Wrinkles should merely indicate where smiles have been.
    God made relatives.Thank God we can choose our friends.
    Home is where your heart is
    ABAP跳转屏幕
    Python 工具包 werkzeug 初探
    atom通过remote ftp同步本地文件到远程主机的方法
    Mongodb学习笔记一
  • 原文地址:https://www.cnblogs.com/edisonxiang/p/4667711.html
Copyright © 2011-2022 走看看