P6 EPPM Installation and Configuration Guide 16 R1 April 2016

  

 

 

 

 

 

 

 

 

 

 

 

 

 

P6 EPPM Installation and Configuration Guide

16 R1

 

 

 

 

April 2016

Contents

About Installing and Configuring P6 EPPM ........................................................ 6

Prerequisites for P6 EPPM Configuration .......................................................... 8

Minimum Hard Disk Space .............................................................................. 8

JDK Installation .......................................................................................... 8

Setting an Environment Variable for Java ..................................................... 9 Installing WebLogic .................................................................................... 10

Installing a Database .................................................................................. 11 Grant Privileges to the SYSTEM User ................................................................ 12 Content Repository Installation and Configuration ............................................... 13 BI Publisher Installation ............................................................................... 13

Workflows Repository Installation ................................................................... 14

Installing the Oracle MDS Schema for BPM .................................................. 14

Modifying the P6 Environment for BPM ...................................................... 15

Installing IAIK-JCE ..................................................................................... 16

Setting an Environment Variable for IAIK-JCE .............................................. 17

About the P6 EPPM Installation Wizard ........................................................... 18

Your P6 EPPM Suite .................................................................................... 19

Where to Go From Here - Pre Configuration Wizard.............................................. 21

Using the P6 EPPM Configuration Wizard To Configure P6 EPPM ......................... 21

Manually Configuring Your Applications ..................................................... 21

About the P6 EPPM Configuration Wizard ........................................................ 22

Configuring Your Database ........................................................................... 22

Using the Database Configuration Screen ................................................... 23

Using the Database Type & Connection Screen ............................................ 24

Using the Create Users Screen ................................................................ 25

Configuring Your WebLogic Server with P6 EPPM ................................................. 26

Using the P6 Configuration Settings Screen ................................................. 26 Using the Application Server Configuration Screen ........................................ 27

Using the Configure WebLogic Screen ....................................................... 27

Using the Configure Component Schema Screen ........................................... 28

Connecting Applications to P6 EPPM ................................................................ 28

Using the Content Repository Selection Screen ............................................ 29 Using the Content Repository Configuration Screen for Oracle Webcenter

Content Core Capabilities ....................................................... 30

Using the Content Repository Configuration Screen for CMIS .............. 31

Using the BI Publisher Screen ................................................................. 32

Using the BPM Workflows Screen ............................................................. 33

Using the BPM Configuration Screen ........................................... 34

Completing Your P6 EPPM Installation .............................................................. 34

Using the Configuration Review Screen...................................................... 34 Using the Configuration Progress Screen .................................................... 35 Using the Configuration Complete Screen................................................... 35 Default Locations Created by the Wizard ................................................... 36

Default Java Heap Settings Created by the Wizard ........................................ 37

Database Administration ............................................................................ 38

Implementing Transparent Data Encryption on the P6 EPPM Database ........................ 38 Background Processes and Clean Up in P6 EPPM .................................................. 39 PX Tables Clean Up Procedure ....................................................................... 40 RDBMS Scheduler Configuration ..................................................................... 41 Database Settings Table .............................................................................. 42

Reading Setting Values ................................................................................ 43

Using Code to Read Setting Values for Oracle .............................................. 43

Using Code to Read Setting Values for Microsoft SQL Server ............................. 43

Writing Setting Values ................................................................................ 44

Using Code to Write Setting Values for Oracle ............................................. 44

Using Code to Write Setting Values for Microsoft SQL Server ............................ 44

Tracking Background Job Execution ................................................................ 45

High Level Status Settings ..................................................................... 45

The BGPLOG Table.............................................................................. 46

SYMON (System Monitor) Procedures ............................................................... 46

OBSPROJ_PROCESS_QUEUE Procedure ....................................................... 47

USESSION_CLEANUP_EXPIRED Procedure .................................................... 48

Tracking Concurrent Usage of P6 EPPM ........................................ 50

DAMON (Data Monitor) Procedures .................................................................. 51

BGPLOG_CLEANUP Procedure ................................................................. 52

REFRDEL_CLEANUP Procedure ................................................................ 53 REFRDEL Bypass Procedure .................................................................... 54 CLEANUP_PRMQUEUE Procedure .............................................................. 55 USESSION_CLEAR_LOGICAL_DELETES Procedure ........................................... 56 CLEANUP_LOGICAL_DELETES Procedure ..................................................... 56 PRMAUDIT_CLEANUP Procedure .............................................................. 58 CLEANUP_USESSAUD Procedure ............................................................... 59

USER_DEFINED_BACKGROUND Procedure .................................................... 61 Oracle Database Performance ....................................................................... 61

Safe Deletes ............................................................................................ 61

Turning Off Safe Deletes ....................................................................... 62

PRMAUDIT Auditing .................................................................................... 62

Auditing Level Configuration .................................................................. 63 About Installing and Configuring P6 EPPM

Simple Configuration ........................................................................... 63

Detailed Configuration ......................................................................... 64 Auditing Status .................................................................... 64

Options Setting .................................................................... 65

SETTINGS_WRITE_STRING Procedure ........................................... 66 The Audit Table ................................................................................. 67 Session Auditing ................................................................................. 68

Column Audit Data .............................................................................. 68

Using the Data Pump Utility .......................................................................... 69

Running a Schema Validation on the Database ............................................. 70

Running the Data Pump Utility Using the Wizard .......................................... 71

Running the Data Pump Utility From the Command Line ................................. 72

Where To Go From Here - Post Configuration Wizard ......................................... 73

Launching Your P6 EPPM Applications .............................................................. 74

Starting and Stopping Managed Servers ..................................................... 75 Starting a Managed or Clustered Server ....................................... 76

Stopping a Managed or Clustered Server ...................................... 77 Settings You Must Configure in P6 Before You Begin ............................................. 77

Installing Additional Applications ................................................................... 78

For More Information ................................................................................ 79

Where to Get Documentation ........................................................................ 79 Documentation Accessibility ......................................................................... 79 Where to Get Training ................................................................................ 79

Where to Get Support ................................................................................. 80

Legal Notices .......................................................................................... 82

     

About Installing and Configuring P6 EPPM

This guide tells you how to automatically install and configure your applications. Before you begin, read the Prerequisites for P6 EPPM Configuration (on page 7).

Installing P6 EPPM

You will use the setup.exe (for Windows) ./runinstaller (for Linux or UNIX) in the Primavera P6 Enterprise Project Portfolio Management physical media or download to install the following P6 EPPM applications:

Note: You do not have to install all applications; you can pick and choose what you install. However, you must install P6 to run the other P6 EPPM applications.

4 P6 (and its help and tutorials)

4 P6 Team Member Interfaces (includes P6 Team Member Web, E-mail Statusing Service, and the server-side components for P6 mobile)

Notes:

• You will need to configure E-mail Statusing Service separately. See the P6 EPPM System Administration Guide.
• P6 for iOS supports SSL (https) or HTTP only when it has a certificate signed by a trusted authority.
• P6 for Android requires SSL (https) when you are not using SSO authentication. If you are using SSO authentication, you can use HTTP or HTTPs protocols. HTTPS requires a valid certificate from an Android trusted certifying authority.

4 P6 Professional Cloud Connect

Select the P6 Professional Cloud Connect install option if you plan to  use P6 Professional with an EPPM Oracle database by connecting to a remote service. The wizard sets up a remote method of access to connect to the EPPM database and the P6 APIs. For more details on establishing the P6 Professional Cloud Connect database connection in P6 Professional, see the P6 Professional Installation and Configuration Guide (P6 EPPM). 

Notes:

• When you choose to install P6 Professional Cloud Connect, the wizard will also install P6 Integration API (in remote mode) by default. 
• P6 Professional Cloud Connect does not apply to Microsoft SQL Server database users.

4 P6 Integration API

About Installing and Configuring P6 EPPM

Note: The wizard installs the remote P6 Integration API. If you want to use the local-mode P6 Integration API, see the P6 EPPM Integration API Configuration Guide.

4 P6 EPPM Web Services

Configuring P6 EPPM

Use the P6 EPPM Configuration Wizard for your initial configuration of P6 EPPM. The P6 EPPM Configuration Wizard is a wizard that you can use to create a P6 configuration in Primavera P6 Administrator and to configure:

4 A connection to an Oracle or Microsoft SQL Server database

4 A WebLogic domain

4 Connections to optional enabling technologies, such as a content repository (Oracle Webcenter Content Core Capabilities (WCCC), Microsoft Sharepoint, or CMIS-compliant repositories), BIP, and or BPM

By default, the P6 EPPM Configuration Wizard runs automatically after you install your P6 EPPM applications. If you need to manually launch the P6 EPPM Configuration Wizard, use eppmconfig.cmd (for Windows) eppmconfig (for Linux) from the P6 EPPM installation folder at

C:P6EPPM_1p6.

After you use the P6 EPPM Configuration Wizard, use Primavera P6 Administrator to configure P6 EPPM administration settings. For more information about Primavera P6 Administrator, see the P6 EPPM System Administration Guide.

       

Prerequisites for P6 EPPM Configuration

Review and complete the prerequisites before configuring any P6 EPPM applications.

Minimum Hard Disk Space

Installing the entire P6 EPPM suite requires 1GB of hard disk space. If you configure the WebLogic domain, that will require 1.75GB of hard disk space; it also requires 4GB of available system memory.

Note: These numbers do not include the space the database requires because that is dependent on how you configure it.

JDK Installation

WebLogic Server requires that you have a Java Development Kit (JDK) installed on your machine. You must manually download and install the required JDK. For a list of supported JDK versions for P6 EPPM, see the Tested Configurations document. As new releases of the software become available, you can find them at http://www.oracle.com/technetwork/java/archive-139210.html.

       

Setting an Environment Variable for Java

After installing the JDK, you must set the following environment variables to ensure the P6 EPPM installation scripts can locate your Java libraries:

4 JAVA_HOME

4 PATH

Setting the Environment Variables in Microsoft Windows

To set the JAVA_HOME and PATH environment variables in Microsoft Windows:

1)    Click Start, Control Panel, System, and then Advanced system settings.

2)    In the System Properties dialog box, on the Advanced tab, click Environment Variables.

3)    Add the JAVA_HOME environment variable:

1. In the System Variables section, click New.
2. In the Variable name field, enter JAVA_HOME.
3. In the Variable value field, enter the location where the JDK software is installed (for example, C:Program FilesJava<java_version>)
4. Click OK.

4)    Update the PATH environment variable to include the location of the Java executable files:

1. In the System Variables section, select the PATH variable, and click Edit.
2. In the Variable value field, insert %JAVA_HOME%in; in front of all the existing directories. Do not delete any existing entries; otherwise, some existing applications may not run.
3. Click OK.

5)    Exit the Control Panel.

Setting the Environment Variables with Unix or Linux

To set the JAVA_HOME and PATH environment variables with Unix or Linux:

1)    Set the JAVA_HOME environment variable by typing the following command:

export JAVA_HOME=<JDK_installation_path>

2)    Set the PATH environment variable by typing the following command:  export PATH=$PATH:$JAVA_HOME/bin  

Installing WebLogic

You will need to install WebLogic to deploy P6 EPPM. For supported versions, see the Tested

Configurations document. For more information about how to install WebLogic, see the following URL: http://www.oracle.com/technetwork/middleware/weblogic/documentation/index.html

Note: Oracle recommends that you install Oracle Access Manager on a new WebLogic Middleware home.

If existing Middleware applications are installed into the Middleware home (for example, BI Publisher or Identity Management), Access Manager will fail to deploy.

Tips

After you finish installing WebLogic, ensure you can run the startNodeManager.cmd (with Windows) startNodeManager.sh (with UNIX or Linux) before installing P6 EPPM. If you cannot run this file, contact your WebLogic administrator for help.

       

Installing a Database

You can use either Oracle or Microsoft SQL Server on your database server for P6 EPPM deployments. For more information about supported database versions, refer to Tested Configurations. You must install the database server before you can create the P6 EPPM database.

If you are using an Oracle Database, you must make sure to create a database with the Oracle Text option enabled. Oracle Text supports the Oracle Database content repository by using standard SQL to index, search, and analyze text and documents stored in the database, in files and on the web. For more details, refer to the Oracle Database documentation.

If you are using a Microsoft SQL Server Database, you must make sure that you enable FILESTREAM before attempting your P6 EPPM installation or upgrade. For information about how to enable FILESTREAM, refer to the Microsoft SQL Server documentation for your version.

Notes: 

• If you attempt to create a database using Oracle Database 12c, the option to create a container database is enabled by default. If you do not want to create a container database, deselect the Create As Container Database check box during the database creation process. If you create a container database, you must also create a pluggable database on which to install your P6 EPPM instance.
• When using an Oracle database, you must install Oracle Multimedia, along with these supporting components: Oracle JVM, Oracle XML DB (XDB), and XML Developer's Kit (XDK). Unless you specify otherwise, all these components automatically get installed with the latest versions of an Oracle database (11g and later). If you chose not to install these components, you will need to install them before you install P6 EPPM. See the Oracle Multimedia's User's Guide on the Oracle Technology Network (OTN) for information on how to install these components.
• Oracle Text is enabled by default.
• jobsvc.job_data_x is used to store XML data for XML import processes using the Varbinary(Max) datatype. In order to support the Varbinary(Max) datatype, you must enable FILESTREAM.

                   

Grant Privileges to the SYSTEM User

Before installing P6 EPPM, execute the following steps:

1)    Navigate to the following location, open the designated script in a text editor, and modify the schema user reference to match your actual schema user name:

scriptsinstallPM_<release level>manual_script_before_install.sql

You must apply grant options to the SYSTEM schema user or a custom user associated with the Oracle DBA role. If you plan to use a custom schema user, other than SYSTEM, to execute steps which require a DBA role, then you must update the references to SYSTEM in the script with the new custom schema user associated with the DBA role.

2)    From the command line, execute: sqlplus sys/password@<db_tns_names_entry> as sysdba

3)    Go to p6suitedatabasescriptsinstallPM_<release_level>, and execute manual_script_before_install.sql.

This script grants SELECT and EXECUTE privileges with grant option to SYSTEM, or a custom DBA username if you prefer to use one, for the following sys objects:

SELECT

4 sys.DBA_VIEWS

EXECUTE

4 sys.DBMS_DBMS_REPUTIL

4 sys.DBMS_DBMS_LOB

4 sys.DBMS_SQL

4 sys.DBMS_JOB

4 sys.DBMS_RANDOM

4 sys.V_$TRANSACTION

Note: For more information about the listed sys objects, refer to the Oracle Database documentation.

                   

Content Repository Installation and Configuration

The Content Repository allows users to collaboratively share and manage documents in P6. For P6 EPPM users to utilize the enhanced document management functionality, you must install either Oracle Webcenter Content Core Capabilities (WCCC) or a CMIS-compliant content repository. Refer to the documentation included with those applications for installation instructions.

Note: P6 supports clustering of the Content Repository only when using WebLogic for the application server.

After you install the Content Repository application and P6, perform the following tasks to complete the Content Repository setup:

4 Configure the Content Repository server based on your organization’s needs. 

4 See Configuring WCCC to Work with P6

4 If you are using another CMIS-compliant repository, see the installation instructions included with your content repository.

4 Enter the appropriate Database/Instance/Content Repository Primavera P6 Administrator settings. You can use the P6 EPPM Configuration Wizard to enter your settings. See Using the Content Repository Selection Screen (on page 29) for detailed information about these settings.

For more information about installing and configuring a content repository for P6 EPPM, refer to the P6 EPPM Content Repository Configuration Guide.

BI Publisher Installation

Consult BI Publisher documentation for installation instructions. For complete overview information about BI Publisher, go to the following web site: http://www.oracle.com/technetwork/middleware/bi-publisher/documentation/index.html.

       

Workflows Repository Installation

The Workflows Repository helps users to keep track of project initiations in P6. For P6 users to utilize the project initiation functionality, you must install the supported Workflows Repository application, BPM. Refer to the documentation included with the Oracle BPM application for installation instructions.

Installing the Oracle MDS Schema for BPM

If you are using BPM, you must install the Oracle MDS schema using the Repository Creation Unit (RCU) on a separate database instance. See the Tested Configurations document for supported versions.

       

Modifying the P6 Environment for BPM

To configure BPM with P6:

1) Create a new directory on the host where P6 is running. For example, P6BPMConnector/P6 and P6BPMConnector/BPM.

In the P6 media pack ToolsBPM Connector12c subfolder, locate the prm-bpm-connector-12c-v1.0.jar

1)    Copy the connector file listed above to the P6BPMConnector/P6 folder you created.

Determine the location of the BPM installation that you are using to integrate with P6. If you have multiple SOA Suite installations, ensure that you determine the location of the specific installation that you are integrating with P6.

2)    Copy all the supporting jars from the BPM installation that you are using to integrate with P6 to the P6BPMConnector/BPM folder you created. Their default locations are listed: 4 <Oracle_Home>soasoamodulesoracle.soa.fabric_11.x.xpm-infra.j ar

4 <Oracle_Home>soasoamodulesoracle.soa.workflow_11.x.xpm-servi ces.jar 4 <Oracle_Home>soasoamodulesoracle.soa.fabric_11.x.xfabric-runt ime.jar

4 <Oracle_Home>oracle_commonmodulesoracle.jmx_12.x.xjmxframework .jar

4 <Oracle_Home>oracle_commonmodulesoracle.jmx_12.x.xjmxspi.jar

4 <Oracle_Home>soapmmodulesoracle.bpm.mgmt_11.x.xoracle.bpm.bp mn-em-tools.jar

4 <Oracle_Home>soasoamodulesoracle.soa.mgmt_11.x.xsoa-infra-mgm t.jar

4 <Oracle_Home>wlserverserverlibwlclient.jar

4 <Oracle_Home>oracle_commonmodulesoracle.xdk_12.x.xxml.jar

4 <Oracle_Home>oracle_commonmodulesoracle.xdk_12.x.xxmlparserv2. jar

4 <Oracle_Home>soasoamodulesoracle.soa.fabric_11.x.x racking-ap i.jar

4 <Oracle_Home>soasoamodulesoracle.rules_11.x.x ulesdk2.jar

Note: The jars must be from the same BPM installation that will be integrated with P6.

3) Edit the weblogic.policy file:

1. Locate the weblogic.policy file in one of the following locations:

In Windows: <Oracle_Home>/wlserver/server/lib In Linux: <Oracle_Home>/wlserver/server/lib

1. Add the following information in weblogic.policy file and restart the P6 application server.

grant codeBase "file:<full path to BPM support JAR directory>/*" { permission java.security.AllPermission;

};

For example :

grant codeBase "file:C:/oracle/bpm12XX/*" { permission java.security.AllPermission;

};

or

grant codeBase "file:/home/oracle/bpm12XX/*" { permission java.security.AllPermission;

};

1. Save and close the file.
2. Restart the P6 application server.

Installing IAIK-JCE

IAIK-JCE is a Java Cryptography Extension that has a set of APIs and can implement cryptographic functionality. It is used for supporting additional security functionalities to the JDK. IAIK-JCE libraries can be used to support higher level of encryption while storing/transmitting sensitive information (for example, passwords) in P6 EPPM.

IAIK-JCE is installed when you install P6 EPPM. To allow the P6 EPPM installer to recognize and install IAIK-JCE, you must modify your existing java.security settings and copy the iaik_jce.jar file to the correct location in <Java_Home>.

To prepare IAIK-JCE for installation:

1)    Navigate to the following URL:  http://jce.iaik.tugraz.at/sic/Products/Core-Crypto-Toolkits/JCA_JCE

2)    Download and extract iaik_jce.zip locally. See Tested Configurations for the supported versions of IAIK-JCE.

3)    Navigate to the lib-signed folder and then copy iaik_jce.jar to <Java_Home>/jre/lib/ext.

4)    Navigate to <Java_Home>/jre/lib/security and then add the following to java.security. security.provider.11=iaik.security.provider.IAIK

Note: If the number '11' is being used by another entry, use the next available number.

5)    Save and then close the file.

6)    Complete the instructions in the following topic:

Setting an Environment Variable for IAIK-JCE (on page 17)

       

Setting an Environment Variable for IAIK-JCE

Setting the Environment Variables in Microsoft Windows

To set the JAVA_TOOL_OPTIONS environment variables in Microsoft Windows:

1)    Click Start, Control Panel, System, and then Advanced system settings.

2)    In the System Properties dialog box, on the Advanced tab, click Environment Variables.

3)    Add the JAVA_TOOL_OPTIONS environment variable:

1. In the System Variables section, click New.
2. In the Variable name field, type JAVA_TOOL_OPTIONS.
3. In the Variable value field, type the following:

-Dprimavera.encryptor.provider="IAIK"

1. Click OK.

4)    Exit the Control Panel.

Setting the Environment Variables with Unix or Linux

To set the JAVA_TOOL_OPTIONS environment variables with Unix or Linux:

1) Set the JAVA_TOOL_OPTIONS environment variable by typing the following command: export JAVA_TOOL_OPTIONS=-Dprimavera.encryptor.provider="IAIK"

       

About the P6 EPPM Installation Wizard

Before you run the installation wizard, ensure that you have read the Prerequisites for P6 EPPM Configuration (on page 7). 

You can install the following with the installation wizard:

4 P6

4 P6 Professional Cloud Connect (to connect to an EPPM Oracle database and P6 APIs using a remote method of access)

Note: When you choose to install Cloud Connect, the wizard will also install P6 Integration API (in remote mode) by default.

4 P6 Integration API (remote mode only)

4 P6 EPPM Web Services

4 P6 Team Member (includes P6 Team Member Web and E-mail Statusing Service)

Once you have completed your installation, the P6 EPPM Configuration Wizard will appear. When the configuration wizard appears, you will have the choice to configure your database, WebLogic server, and extra application settings.

In This Section

Installing Your P6 EPPM Suite ................................................................................ 18

Where to Go From Here - Pre Configuration Wizard ............................................... 21

       

About the P6 EPPM Installation Wizard

Your P6 EPPM Suite

To install your P6 EPPM applications:

1)    Download the Primavera P6 Enterprise Project Portfolio Management <release_level> for <platform> folder and extract the contents.

2)    Go to the location where you extracted the contents and run one of the following depending on your system type:

4 If you are installing on a Microsoft Windows system, navigate to the

P6_R<release_level>Disk1install directory, and then double-click on the setup.exe file.

4 If you are installing on a non-Microsoft Windows system, type the following command:

cd P6_R<release_level>/Disk1/install chmod 755 runInstaller chmod 755 unzip

./runInstaller

3)    On the Welcome screen, click Next.

Note: Click Next on each wizard screen to advance to the next step.

4)    On the Specify Home Details screen, complete the following: 

1. In the Name field, enter a name for the installation. 
2. In the Path field, browse to the location of the P6 EPPM home folder (for example, C:P6EPPM_1).

5)    On the Available Product Components screen, select each component you want to install. Alternatively, if you are reinstalling your P6 EPPM applications for an upgrade, select the components that have Reinstall as the value in the Install Status column.

Note: You can choose Select All if you want to install all P6 EPPM applications.

1. If you are installing P6, select P6.
2. If you are connecting P6 Professional with an P6 EPPM Oracle database, select P6 Professional Cloud Connect. This installation option is applicable to only Oracle database users. The wizard will also install P6 Integration API (in remote mode) by default.

Note: After running the P6 EPPM Configuration wizard, the Configuration Complete screen will display the default URL generated for P6

Professional Cloud Connect. This URL (case-sensitive) must be provided to P6 Professional users to enable them to setup and configure a new database connection to the P6 Pro Cloud Connect server in the P6 Professional database configuration utility.

For more details on establishing the P6 Pro cloud connect database connection in P6 Professional, see the P6 Professional Installation and Configuration Guide (P6 EPPM). 

1. If you are installing P6 Integration API, select P6 Integration API.

Notes:

• The wizard will install the remote version of P6 Integration API.
• If you need to install the local version of P6 Integration API or want to install the client-side packages (which include libraries and documentation for remote mode), see the P6 EPPM and P6 Professional Integration API Programming Guide.

1. If you are installing P6 EPPM Web Services, select P6 Web Services. The wizard will also install the demo applications for P6 EPPM Web Services.
2. If you are installing P6 Team Member, select P6 Team Member. This will install the files necessary for P6 Team Member Web, E-mail Statusing Service, and the server components for P6 mobile.

Notes: 

• If you want to use E-mail Statusing Service, see the P6 EPPM System Administration Guide when you have completed installing and configuring your other applications.
• P6 for iOS supports SSL (https) or HTTP only when it has a certificate signed by a trusted authority.
• P6 for Android requires SSL (https) when you are not using SSO authentication. If you are using SSO authentication, you can use HTTP or HTTPs protocols. HTTPS requires a valid certificate from an Android trusted certifying authority.

6)    On the Specify JDK Home screen, type or browse to the location where JDK is installed.

7)    On the Summary screen:

1. Verify that all of the components that you want to install are listed. b. Click Install.

Note: Ignore the Configuration Assistants screen when it appears. It will close itself.

8)    On the End of Installation screen, click Exit.

Note: The P6 EPPM Configuration Wizard will appear if the installation was successful.

9)    In the Exit dialog box, click Yes.

10) If you want to use the P6 EPPM Configuration Wizard to configure your P6 EPPM, WebLogic, and other applications, continue to About the P6 EPPM Configuration Wizard (on page 21). If you want to configure your applications manually, click Cancel to exit the configuration wizard. See Where to Go From Here - Pre Configuration Wizard to see what guides you will need to configure your applications manually.

About the P6 EPPM Installation Wizard

Where to Go From Here - Pre Configuration Wizard

The configuration process provides you with several options to configure your applications to work with P6 EPPM. The following sections describe your options.

Using the P6 EPPM Configuration Wizard To Configure P6 EPPM

Oracle recommends you use the P6 EPPM Configuration Wizard to configure P6 EPPM, its applications, and WebLogic. With this option, you can install or upgrade your database, deploy your P6 EPPM applications in WebLogic, and configure a content repository, BI Publisher, and BPM to work with P6. Continue to About the P6 EPPM Configuration Wizard (on page 21) to use this option.

Manually Configuring Your Applications

Database

You can manually install or upgrade your database. If you want to install or upgrade your database manually, you can still use the wizard to deploy your P6 EPPM applications in WebLogic and configure a content repository, BI Publisher, and BPM to work with P6. 

If you want to install or upgrade your database manually, see the P6 EPPM Installation and Configuration Guide for your database.

P6 EPPM Applications

You can manually deploy your P6 EPPM applications in WebLogic. Depending on which applications you are using, use the following:

4 P6 Server Configuration Guide

4 P6 EPPM Team Member Configuration Guide

4 P6 EPPM Web Services Configuration Guide

4 P6 EPPM Integration API Configuration Guide

Additional Applications

You can also use the Primavera P6 Administrator to connect additional applications to P6. Depending on your application, use the following:

4 P6 EPPM BI Publisher Configuration Guide

4 P6 EPPM BPM Configuration Guide

4 P6 EPPM Content Repository Configuration Guide

4 P6 EPPM Oracle Identity Manager Configuration Guide

4 Primavera Oracle Access Manager Configuration Guide

4 Primavera Oracle Enterprise Manager Configuration Guide

       

About the P6 EPPM Configuration Wizard

The P6 EPPM Configuration Wizard will allow you to:

4 Install or upgrade your database.

4 Deploy your P6 EPPM applications in WebLogic and setup managed servers.

4 Configure BI Publisher, BPM, and your content repository (WCCC or CMIS) with P6.

Use the P6 EPPM Configuration Wizard to configure your suite. Before running the configuration wizard, consider the following:

4 You must be on an Oracle server or Microsoft SQL Server.

4 You must have a JDK installed. See the Tested Configurations document for information on supported versions.

Note: To manually launch the P6 EPPM Configuration Wizard, use eppmconfig.cmd (for Windows) eppmconfig.sh (for UNIX / Linux) from the P6 EPPM installation folder at <P6 EPPM_home>P6EPPM_1p6.

On the Welcome screen, click Next if you want to use the wizard to configure your suite. Click Cancel if you want to configure your applications manually.

In This Section

Configuring Your Database ..................................................................................... 22

Configuring Your WebLogic Server with P6 EPPM .................................................. 26

Connecting Applications to P6 EPPM ...................................................................... 28

Completing Your P6 EPPM Installation ................................................................... 34

Configuring Your Database

You must either install or upgrade your database or already have the latest database installed to use this wizard. If you want to manually install or upgrade your database, leave the P6 EPPM Configuration Wizard open and go to the Manually Installing the P6 EPPM Database or Manually Upgrading the P6 EPPM Database guides. If you want to automatically install or upgrade your database, continue to the next section.

       

Using the Database Configuration Screen

On the Database Configuration screen:

1)    Choose one of the following:

4 Select Create a new P6 EPPM database if you are creating a new database.

Select the Install Sample Projects option if you want to include sample project data in a non-production database. If you do not select the Install Sample Projects option, the P6 EPPM database loads empty data in a secure state and includes only the most basic information needed to run.

4 Select Upgrade an existing P6 EPPM database if you are upgrading your database.

4 Select Connect to an existing P6 EPPM <release_level> database if you already installed a database and want to configure your applications with it.

Note: Before you install sample data, you should ensure sample data will not be audited. To disable Unified Auditing: 

1. Open command prompt (if Windows) or terminal (if UNIX) and connect to your database using the following command:

 sqlplus sys/password@dbservicename as sysdba

1. Execute the following commands in the same window:

 noaudit policy ORA_SECURECONFIG;  noaudit policy ORA_LOGON FAILURES;

1. Close the window. 

2)    Click Next.

       

Using the Database Type & Connection Screen

On the Database Type & Connection screen:

1)    For the Database Type option, choose one of the following:

4 Oracle

4 Microsoft SQL Server.

2)    In the Database Host Address field, enter the server machine name or IP address where you installed the database.

3)    In the Database Host Port field, enter or verify the port number for your database. 

The default for Oracle is 1521.

The default for Microsoft SQL Server is 1433.

4)    In the DBA (when installing or upgrading) or Public (when connecting to an upgraded database) Username field, enter or verify your user name.

The default username for Oracle is 'system'.

The default username for Microsoft SQL Server is 'sa'.

The default public username is 'pubuser'.

5)    In the DBA (when installing or upgrading) or Public (when connecting to an upgraded database) Password field, enter the password to log in to the database.

6)    In the Database Name field:

1. Enter the name of your database.
2. Select SID (for example, orcl) or Service (for example, orcl.us.oracle.com) based on the database you installed.

7)    Click Next.

       

Using the Create Users Screen

On the Create Users screen:

1)    In the Database Users section, specify the user names and passwords for these users:

1. Administrative (Oracle only) is the schema owner for all P6 EPPM data.
2. Privileged has read and write access to most P6 EPPM data.
3. Public has restricted access to the database.
4. Background (Oracle only) executes background processes.
5. Reporting is the PX Reporting user who owns tables and views for reporting data.

Caution: Use a unique name for all your user names; do not use duplicate names. For example, do not enter privuser as the administrative user name or pubuser as your PX reporting user name. Repeating user names will cause conflicts.

Notes:

• A red X will appear if the Password and Confirm Password fields do not match. A green check will appear when the two fields match.
• P6 EPPM does not support passwords with multi-byte characters.
• Oracle recommends using strong passwords. Strong passwords in P6 EPPM contain between 8 and 20 characters and at least one numeric and one alpha character. To further strengthen the password, use a mixture of upper and lower case letters.
• Do not use special characters in the database name, privileged user, public user, or PX reporting user name, for example: { } [ ] : ; < > , . ? ! @ # $ % ^ & * ( ) - _ | / ~ `

2)    In the Application User section, enter the P6 EPPM application administrative user name and password. By default, the application administrative user will receive Admin Superuser access rights to all applications.

Notes: 

• A red X will appear if the Password and Confirm Password fields do not match. A green check will appear when the two fields match.
• Oracle recommends using strong passwords. Strong passwords in P6 EPPM contain between 8 and 20 characters and at least one numeric and one alpha character. To further strengthen the password, use a mixture of upper and lower case letters.

3)    Click Next.

       

Configuring Your WebLogic Server with P6 EPPM

In this section, you will configure the P6 EPPM applications you installed with the installation wizard. The P6 EPPM Configuration Wizard will set up managed servers and deploy your P6 EPPM applications in the WebLogic domain that you installed.

Using the P6 Configuration Settings Screen

On the P6 Configuration Settings screen:

1)    Do one of the following:

4 If a P6 configuration does not exist, in the Create a new configuration field, enter your new configuration name.

4 If you already created a configuration, choose it from the Use an existing configuration option, or create a new configuration.

Note: 

• If you are upgrading from a previous version of P6 against the same database, choose the option to create a new configuration. This is necessary to accommodate new configuration settings. See the P6 EPPM System Administration Guide for more information about configurations and the Primavera P6 Administrator.
• You can edit the settings for this configuration through the Primavera P6 Administrator.

2)    Click Next.

       

Using the Application Server Configuration Screen

On the Application Server Configuration screen:

1)    Select the Configure WebLogic option.

Notes:

§    If you do not want to configure WebLogic right now, ensure the Configure WebLogic option is clear and click Next to continue to the next screen. If you want to configure WebLogic manually, refer to the P6 Server Configuration Guide.

2)    Choose one of the following:

4 Create a new WebLogic domain if you are creating a new domain.

4 Use an existing WebLogic domain if you already have a WebLogic domain.

Note: This is the domain where the wizard will create your managed servers for each application.

3)    (Optional) Select Deploy Oracle WSM Policy Manager if you are integrating with BPM and or select Configure WSM Policy for P6WebServices if you are configuring OWSM authentication for P6 EPPM Web Services. For more information, refer to the P6 EPPM Web Services Programming Guide.

Note: By default, the configuration wizard deploys P6 EPPM Web Services with the oracle/wss_username_token_server_policy OWSM policy. This policy does not contain message protection and encryption and needs additional configuration to enable either. Refer to Adding Additional Policies to Oracle Web Services Manager in the P6 EPPM System Administration Guide for details on configuring additional OWSM policies.

4)    Click Next.

Using the Configure WebLogic Screen

On the Configure WebLogic screen:

1)    In the WebLogic Server Home field, verify or choose the location of your WebLogic home. For example, C:OracleMiddlewareOracle_Home.

2)    In the Domain Home field, enter or verify your WebLogic domain home name.

3)    In the Port field, enter or verify the port number that your WebLogic domain is using. The default port is 7001.

4)    In the Administration Username field, create or verify your administrative user name for the WebLogic domain you defined on the previous screen.

5)    In the Password and Confirm Password fields, enter the password for your administrative username.

6)    Click Next.

Using the Configure Component Schema Screen

On the Configure Component Schema screen:

Notes: 

• This screen will only appear if you selected the Deploy Oracle WSM Policy Manager option above. If you did not select the option, the wizard will skip this screen.
• You must create the required schema for BPM before you deploy the P6 EPPM Configuration Wizard. For more information about the schema required for BPM, see the Oracle Fusion Middleware Installing and Configuring Oracle SOA Suite and Business Process Management guide.

On the Component Schema screen:

1)    For the Configure Component Schema Connection option, choose Oracle or Microsoft SQL Server.

1. If you are using Oracle Database, select SID or Service.

2)    Do the following for the schema in the Component Schema fields:

1. In the Host Name field, enter the server machine name or IP address where you installed the database. 
2. In the Port field, enter or verify the port number for your database.

The default for Oracle is 1521.

The default for Microsoft SQL Server is 1433.

1. In the Schema Owner field, enter or verify the name of the schema owner.
2. In the Password field, enter the password to log into the database.
3. In the SID/Service field, enter the SID (for Oracle 11g) or Service (for Oracle 12c) based on the database you installed.

3)    Click Next.

Connecting Applications to P6 EPPM

If you installed a content repository, BI Publisher, or BPM, you can use the P6 EPPM

Configuration Wizard to configure these applications to work with P6 EPPM. The settings in this wizard correspond to the settings in the Primavera P6 Administrator.

Notes: 

• You can configure the settings for these applications later in the Primavera P6 Administrator. See Manually Configuring Your Applications (on page 21) for the guides you will need.
• If you are using an existing P6 configuration, the wizard will skip the content repository, BI Publisher, and BPM screens.

About the P6 EPPM Configuration Wizard

Using the Content Repository Selection Screen

On the Content Repository Selection screen:

1)    Select the Connect to a Content Repository option.

Note: If you would rather configure your content repository manually or do not have a content repository installed, ensure the Connect to a Content Repository option is clear and click Next. See the P6 EPPM Content Repository Configuration Guide for more information.

2)    Choose Oracle Webcenter Content Core Capabilities, CMIS, or Oracle Database.

Notes: 

• If you select Oracle Database, you will not need to configure your database as a content repository in the P6 EPPM Configuration Wizard.
• If you want to configure Microsoft SharePoint with P6, you must configure it with your CMIS-compliant content repository and then select CMIS for this step. See your CMIS-client content repository documentation for information about how to configure your CMIS-complient content repository with Microsoft SharePoint.

3)    Click Next.

       

Using the Content Repository Configuration Screen for Oracle Webcenter Content Core Capabilities

On the Content Repository Configuration screen:

Note: Ensure the settings you entered in when you configured the content repository match the settings you enter below.

1)    In the Host field, enter the machine name or IP address of the content repository server.

2)    In the Port field, enter the IntradocServerPort number of the content repository server. By default, this is 4444. To find the port number: 

1. Navigate to WCCC_Homeucmcsconfig.
2. Open the config.cfg file.
3. Find the IntradocServerPort line, which contains the port number.

3)    In the Oracle Home field, enter the path to the P6 EPPM content repository files on the content repository server, as specified when you configured your content repository. This setting is required.

Example:

//Contribution Folders/Production/Oracle Primavera/

4)    In the Oracle Security Group field, enter the name of the Security Group assigned to the document folder created in WebCenter for P6 EPPM documents, as specified when you configured the content repository. 

5)    In the Oracle Security Account field, enter the name of the Security Account for P6 EPPM documents, as specified when you configured the content repository. 

If you did not enable security accounts, leave this setting blank.

6)    In the Oracle Document Type field, enter the document type for P6 EPPM documents, which can be either an existing document type or a new one, as specified when you configured the content repository. 

For example:

Enter the Document Type as Document.

7)    In the Metadata Prefix field, enter the prefix added to P6 EPPM metadata fields, as specified when you configured the content repository.

8)    In the Admin User field, enter the user name with administrative privileges, as specified when you configured the content repository. This setting is required.

9)    In the Authentication Mode field, enter authentication mode used to access the content repository server. P6 EPPM users cannot access content repository functions if you do not configure this setting.

If you choose "Multiple User", all P6 EPPM content repository-related user names must match the equivalent content repository user name. For example, a P6 EPPM user named "Joe" must have an equivalent user named "Joe" in the content repository.If you choose "Single User", the administrative user specified in the setting above must have access to all appropriate Security Groups to browse to documents outside of the P6 EPPM home folder. 10) Click Next.

About the P6 EPPM Configuration Wizard

Using the Content Repository Configuration Screen for CMIS

On the Content Repository Configuration screen:

1)    In the Login Name field, enter the user name for your content repository.

2)    In the Password field, enter the password for the user name you entered above.

3)    In the Authentication Mode field, enter authentication mode used to access the content repository server. P6 EPPM users cannot access content repository functions if you do not configure this setting.

If you choose "Multiple User", all P6 EPPM content repository-related user names must match the equivalent content repository user name. For example, a P6 EPPM user named "Joe" must have an equivalent user named "Joe" in the content repository.

If you choose "Single User", the administrative user specified in the setting above must have access to all appropriate Security Groups to browse to documents outside of the P6 EPPM home folder.

4)    In the Repository Name field, enter the name for your content repository.

5)    In the Document Home field, enter the location of your documentation home where you want to store P6 documents.

6)    In the Web Service URL field, enter the URL for your web services home. 

       

Using the BI Publisher Screen

On the BI Publisher screen:

1)    Select the Connect to BI Publisher option.

Note: If you would rather configure BI Publisher manually or do not have BI Publisher installed, verify the Connect to BI Publisher option is clear and click Next. See the P6 EPPM BI Publisher Configuration Guide for more information.

2)    In the Server URL field, enter the URL used to connect to the BI Publisher web service to P6. For example,

http://serverIP:port/xmlpserver/services/PublicReportService

3)    In the Version field, enter the version of BI Publisher that you want to integrate with P6.

4)    In the Folder Paths field, enter the relative path to the BI Publisher P6 reports folder where P6 will search for reports.

Example format (the forward slash is required):

/P6REPORTS

Notes: 

• You can find the relative path (for example,  /P6Reports) in the following folder:
• %weblogic_home%user_projectsdomainsifoundation_ domainconfigipublisher epositoryReports

5)    In the Admin Username field, enter a BI Publisher web services user name with administrative privileges (for example, PxRptUser).

6)    In the Password field, enter the password for the administrative user name.

7)    In the Personal Folders field, select the option (true) to enable personal folders per user. If you do not want to use personal folders, leave the option clear. Users have their own personal folders where they can store their objects. Only the user who created and saved the content in the folder can access the folder.

8)    In the Scrub Username field, select the option (true) to enable the setting or leave it clear (false) to ensure it is disabled.

This setting controls whether special characters (non-alphanumeric) are removed from the user name when connecting to BI Publisher. The default is 'false,' meaning special characters will not be removed.

If you are using the P6 EPPM Extended Schema for BI Publisher reporting, leave the setting as false. 

If you are using the P6 ODS Schema for BI Publisher reporting, change the setting to true.

Setting the value to true will allow the user’s security context (user name) to format properly before it goes to BI Publisher. This allows reporting queries to perform against the ODS tables.

9)    In the Cache Timeout field, enter how long cached report definitions should appear. The default is 1d.

10) Click Next.

About the P6 EPPM Configuration Wizard

Using the BPM Workflows Screen

On the BPM Workflows screen:

1)    Select the Connect to BPM option.

Note: If you would rather configure BPM manually or do not have BPM installed, ensure the Connect to BPM option is clear and click Next. For more information, see the 0P_ProdName_P6_Suite> BPM Configuration Guide.

2)    In the Connector file location field, enter the full path (including the file name) where you copied the connector files. For example:

c:/Software/BPMJars/eppmjars/prm-bpm-connector-12c-v1.0.jar.

3)    In the BPM library path field enter the directory where you copied all the jars.

Notes: 

• To satisfy these requirements, this admin setting can contain multiple path elements. You must separate multiple path elements with a semicolon. For example: C:SoftwareBPMJars;C:SoftwareBPMJars
• If the above settings are incorrect or the BPM jar files are incomplete, you will see an error message when you try to configure BPM. Verify that your settings and jar files are correct.

                    

Using the BPM Configuration Screen

On the BPM Configuration screen, add the following settings:

1)    In the bpm.user field, enter the BPM 11g user with administrative access to BPM.

2)    In the bpm.password field, enter the password for the user.

3)    In the bpm.t3.url field, enter the T3 URL for your Oracle SOA configuration. For example: t3://<host_name>:<port>/soa-infra

4)    In the bpm.security.realm field, enter the name of the security realm used by BPM. This is jazn.com by default.

5)    In the bpm.soap.url field, enter the URL for the SOAP services. Usually this URL takes the form of http://<host_name>:<port>.

6)    In the bpm.workspace.url field, enter an address in the form of http://<host_name>:<port> that indicates where the BPM Workspace application is hosted.

Note: The host can be an IP address or a host name such as a machine name.

7)    In the bpm.partition field, enter the name of the SOA partition containing the BPM composite applications you would like to use in P6. The default partition name is default.

8)    Click Next.

Completing Your P6 EPPM Installation

Once you have finished entering your configuration settings, you can verify all the applications you configured. Once you click Configure, the wizard will setup your P6 EPPM environment and start WebLogic. After the wizard finishes, you will be able to login and use all of your applications.

Using the Configuration Review Screen

On the Configuration Review screen:

1)    Verify all your configuration settings are correct.

2)    Click Next.

3)    On the Acknowledgment dialog box, click OK to confirm you have read the information.

If you are upgrading from P6 8.2 or lower version and have been using a content repository configured with P6, you will need to run the Document Migration Utility located in P6 home after the installation completes.

4)    On the Start Configuration? dialog box, click Yes to confirm you want the wizard to configure your applications.

Click No if you do not want to continue with the configuration.

About the P6 EPPM Configuration Wizard

Using the Configuration Progress Screen

On the Configuration Progress screen, the wizard will let you know when each item is configured. The configuration process will take several minutes. When the configuration is done, all of your applications will have a green check next to them.

The configuration wizard will do any of the following based on the selections you made in the previous screens:

4 Create your database.

4 Create or upgrade the Primavera Configuration.

4 Create a WebLogic domain.

4 Create bootstrap files for your applications.

4 Create managed servers and deploy the applications you installed into them.

4 Configure integrations with other servers for the content repository, BI Publisher, and BPM.

4 Configure URLs to the P6 Help in the Primavera P6 Administrator.

4 Create Start menu items for P6 EPPM URLs and start/stop scripts. 

4 Sets your parameters in WebLogic.

For example, it will set your bootstrap variables and Java heap settings for you. This will connect P6 to your other P6 EPPM applications and ensure that your environment is set up for optimal performance.

When the configuration wizard completes this process:

1)    Note the location of the log file. Use the log file to view what happened during setup and see what went wrong if an error occurred.

2)    Click Next.

Using the Configuration Complete Screen

On the Configuration Complete screen:

1) Click any link to go to the default URL for each of your applications. 2) Click the Save Configuration button.

Note: The HTML file you save contains the default URLs and other information for your P6 EPPM applications.

1. Choose a location where you want to store your HTML file (Oracle recommends using the P6 EPPM directory you created when you installed your applications).
2. In the File Name field, verify or enter a name for your configuration HTML file. c. Click Save.

d. On the Configuration Saved Successfully dialog box, click OK. 3) Click Finish.

Note: Once you click Finish, the wizard will start WebLogic for you so you can begin using your applications instantly.

Default Locations Created by the Wizard

The configuration wizard creates the following defaults.

Oracle Primavera EPPM Home

4 C:p6eppm_1 

4 Holds all your P6 EPPM applications folders and files

Note: 

• The local drive location is the default the wizard provides. If you changed it, it will be noted in the HTML file you saved in Using the Configuration Complete Screen (on page 35).
• You will need to enter your IP address where it says 'server' in the URLs below.

4 WebLogic Administration Console

Port: 7001

URL: http://server:7001/console

4 P6

Port: 8203

URL: http://server:8203/p6

4 P6 Integration API

Port: 8205

URL: http://server:8205/PrimaveraAPI

4 P6 EPPM Web Services

Port: 8206

URL: http://server:8206/p6ws/services

4 P6 mobile Port: 8207

URL: http://server:8207/p6tmws

Note: This is the URL you will enter when you sign into the P6 mobile app on your mobile device. The actual URL will not work in a browser.

4 P6 Team Member Web

Port: 8207

URL: http://server:8207/p6tmweb

4 E-mail Statusing Service

File Name: p6tm-email-service.zip

Default Location: C:P6EPPM_1 mws or /usr/P6EPPM_1/tmws

Note: You will have to unzip the file and configure the email services before you can update status through email. See the P6 EPPM System Administration Guide.

4 P6 Professional Cloud Connect

About the P6 EPPM Configuration Wizard

Port: 8208

URL: http://server:8208/p6procloudconnect 

Note: This URL (case-sensitive) must be provided to P6 Professional users to enable them to setup and configure a new database connection to the P6 Pro Cloud Connect service in the P6 Professional database configuration utility.

For more details on establishing the P6 Pro Cloud Connect connection in P6 Professional, see the P6 Professional Installation and Configuration Guide (P6 EPPM).

Default Java Heap Settings Created by the Wizard

The Java Heap settings will provide most environments with optimal performance. Do not change them unless you know your environment requires different settings. Xms is the initial heap size. Xmx is the maximum heap size.

4 WebLogic Administration Console Java Heap

-Xms512m -Xmx1024m

4 P6 Java Heap

-Xms512m -Xmx1024m

4 P6 ProfessionalCloud Connect

-Xms1024m -Xmx1024m

4 P6 Integration API Java Heap

-Xms256m -Xmx512m

4 P6 EPPM Web Services Java Heap

-Xms256m -Xmx512m

4 P6 mobile Java Heap

-Xms256m -Xmx512m

4 P6 Team Member Web Java Heap

-Xms256m -Xmx512m

       

Database Administration

Read this chapter to learn how to configure the job scheduler supplied by your RDBMS, how to optimize performance of your P6 EPPM database, and how to configure the PRMAUDIT feature to monitor edits, deletions, and additions to the databases.

In This Section

Implementing Transparent Data Encryption on the P6 EPPM Database ................. 38

Background Processes and Clean Up in P6 EPPM ................................................. 39

PX Tables Clean Up Procedure ............................................................................... 40

RDBMS Scheduler Configuration ............................................................................ 41

Database Settings Table ......................................................................................... 42

Reading Setting Values ........................................................................................... 43

Writing Setting Values ............................................................................................. 44

Tracking Background Job Execution ....................................................................... 45

SYMON (System Monitor) Procedures .................................................................... 46

DAMON (Data Monitor) Procedures ........................................................................ 51

Oracle Database Performance ................................................................................ 61

Safe Deletes ............................................................................................................ 61

PRMAUDIT Auditing ................................................................................................ 62

Using the Data Pump Utility ..................................................................................... 69 

Implementing Transparent Data Encryption on the P6 EPPM Database

Transparent data encryption (TDE) is an Oracle Advanced Security feature that is used for Oracle Database encryption. TDE provides strong protection from malicious access to database files by encrypting data before it is written to storage, decrypting data when being read from storage, and offering built-in key management.

For more information about TDE, refer to http://www.oracle.com/technetwork/database/options/advanced-security/index-099011.html.

For TDE implementation instructions, refer to the readme.txt file in the P6 EPPM physical media or download at databasescriptscommon de.

       

Database Administration

Background Processes and Clean Up in P6 EPPM

Because clean up tasks can be resource intensive and time consuming, in P6 EPPM, these tasks are initiated by two background jobs that run on the database server using the background job processes user name:

4 SYMON (System Monitor), responsible for running procedures that take less than a few seconds to complete.

4 DAMON (Data Monitor), responsible for running procedures that take longer than a few seconds to complete.

Both of these jobs are pre-configured with default settings. Since the default settings are optimal for most environments, you generally do not need to tune them. However, if you need to optimize your background process further, you can use the background job processes user to change the settings to tune the behavior of the background jobs for specific environments.

The background process will:

4 Update the settings table with a record each time a job runs.

4 Update the settings table with a HeartBeatTime record for both the SYMON and DAMON processes. The background processes regularly refresh the record to indicate that they are still running.

When you initiate background jobs:

4 Execute the stored procedure INITIALIZE_BACKGROUND_PROCS.

4 Locate the logs of background process activity in BPLOGS and SETTINGS tables within the         Primavera database.         

PX Tables Clean Up Procedure

To avoid operational problems for P6, PX table entries are not automatically deleted when you delete data from P6 tables. You can use the following clean up procedure to clear the obsolete entries in PX tables. 

1) Run the CLEAN_PX_DELETE stored procedure to purge obsolete entries in the PX tables: For Oracle:

BEGIN

CLEAN_PX_DELETE();

END;

For a Microsoft SQL Server database:

USE [ddname]

GO

DECLARE @return_value int

EXEC @return_value = [dbo].[CLEAN_PX_DELETE]

SELECT 'Return Value' = @return_value GO

where ddname is the is your admin user name

Note: You can run this procedure any time you want or you can run it as a database background job and schedule a specific time for it to run.

2) To delete batch size and max delete from each table in a single run, run the following queries:

Note: You can specify the delete batch size and max delete from each table in a single run. Delete batch size is the number of rows deleted before a commit. Max delete is the max number of rows that will be deleted from a table in a single run. They have default values if you do not provide your own. They're used to avoid resource problems with the P6 operations.  

4 insert into settings (namespace, setting_name, setting_value) values ('PxService.Cleanup','DeleteMaxSize','100000');

4 insert into settings (namespace, setting_name, setting_value) values

           ('PxService.Cleanup','DeleteBatchSize','5000');               

Database Administration

RDBMS Scheduler Configuration

Since background jobs are initiated by the job scheduler supplied by the RDBMS, you need to ensure that the scheduler for your specific RDBMS is properly configured.

For an Oracle Database: P6 EPPM uses DBMS_SCHEDULER to schedule background jobs in Oracle. P6 EPPM 15 R2 does not need parameter changes.

For a Microsoft SQL Server Database: P6 EPPM uses the SQL Agent service to automatically schedule background job execution for Microsoft SQL Server. Background jobs handles the maintenance of the utilities tables (for example, USESSION and REFRDEL). As part of background jobs, the agent runs the SYMON and DAMON stored procedures at specific intervals.

       

Database Settings Table

Settings Table Overview

The settings table contains name-value pairs that configure the behavior of the background processes.

Namespace

The namespace component is a dot-notation string representing a formal path to the parameter.

Setting Name

The setting name identifies the name of the setting.

Value

Values in the SETTINGS table are case-sensitive. The value portion of the pair can be:

4 String: The string data type is a free text value. The most common string sub-type is interval which represents an interval of time by combining a numeric portion with a unit portion as depicted in the table below.

Interval Subtype Table
		Unit portion	Example	Meaning
Numeric portion	+	d	‘30d’	Thirty day interval
		h	‘2h’	Two hour interval
		m	‘10m’	Ten minute interval
		s	‘30s’	Thirty second interval

4 Numeric: The numeric data type consists of any number.

4 Boolean: The Boolean data type can have one of two values: true or false, where zero represents false and any non-zero number represents true. 4 Date: The date data type consists of dates.

Setting Example

The following is an example of a setting:

4 Namespace: database.cleanup.Usession

4 Setting Name: ExpiredSessionTimeout

4 Value: 2h (two hour interval)            

Database Administration

Reading Setting Values

You can configure settings through the Settings API Procedures. These procedures are similar to registry or INI file procedure calls.

Reading Settings Values

Use the following SETTINGS_READ_* procedures to determine the current value of specific settings:

4 SETTINGS_READ_STRING(ret_val,namespace,settings_name,default) 4 SETTINGS_READ_DATE(ret_val,namespace,settings_name,default)

4 SETTINGS_READ_NUMBER(ret_val,namespace,settings_name,default) 4 SETTINGS_READ_BOOL(ret_val,namespace,settings_name,default)

Using Code to Read Setting Values for Oracle

The following code snippets for the Oracle Database demonstrate how the SETTINGS_READ_* procedures read the setting values.

To retrieve the value of the KeepInterval setting in Oracle:

1) Use the following code:

SQL> variable vset varchar2(255)

SQL> exec settings_read_string(:vset,'database.cleanup.Usession', 'ExpiredSessionTimeout');

2. The following message should appear:

PL/SQL procedure successfully completed. SQL> print vset

Using Code to Read Setting Values for Microsoft SQL Server

The following code snippets for the Microsoft SQL Server database demonstrate how the SETTINGS_READ_* procedures read the setting values.

To retrieve the value of the KeepInterval setting in SQL:

1)    Use the following code:

declare @vset varchar(255) exec settings_read_string @vset

OUTPUT,'database.cleanup.Usession','ExpiredSessionTimeout' print @vset

2)    The following message should appear:

PL/SQL procedure successfully completed. SQL> print vset

Writing Setting Values

Use the SETTINGS_WRITE_STRING procedure to set the value of a specific setting:

SETTINGS_WRITE_STRING(new value,namespace,settings_name);

Using Code to Write Setting Values for Oracle

The following code snippets for Oracle Database demonstrate how the

SETTINGS_WRITE_STRING procedure sets the value of the ExpiredSessionTimeout setting to twelve hours.

To set the value of the ExpiredSessionTimout setting to twelve hours in an Oracle Database:

1)    Log into SQL *Plus using privuser as your user name.

2)    Run the following statement:

SQL > exec SETTINGS_WRITE_STRING

('12h','database.cleanup.Usession','ExpiredSessionTimeout');

Using Code to Write Setting Values for Microsoft SQL Server

The following code snippets for Microsoft SQL Server databases demonstrate how the SETTINGS_WRITE_STRING procedure sets the value of the ExpiredSessionTimeout setting to twelve hours.

To set the value of the ExpiredSessionTimeout setting to twelve hours in a Microsoft SQL Server database:

1)    Open the Query Analyzer/SSMS and connect as privuser.

2)    Select the P6 EPPM database, then run the following statement (using 12 hours as an example):

exec SETTINGS_WRITE_STRING '12h','database.cleanup.Usession',  'ExpiredSessionTimeout'                     

Tracking Background Job Execution

You can track the execution of background jobs by monitoring the high level status settings or by inspecting the BGPLOG table.

High Level Status Settings

Each time a job runs it will update the SETTINGS table for the setting_name = 'HeartBeatTime.'

The job can update this value multiple times during the execution. You can monitor the maximum difference between this time and the current date to ensure that the job is running promptly. Refer to the High Level Status Settings table below for information about the HeartBeatTime setting.

High Level Status Settings
Last date and time background job SYMON ran.
Namespace	database.background.Symon
Setting Name	HeartBeatTime
Default Setting	N/A
Last date and time background job DAMON ran.
Namespace	database.background.Damon
Setting Name	HeartBeatTime
Default Setting	N/A

 

       

The BGPLOG Table

You can also track the execution of background jobs by inspecting the BGPLOG table. The BGPLOG table holds detailed entries from the background processes including informational, elapsed time, and error entries. Refer to the BGPLOG Table Descriptions for information about what this table contains.

BGPLOG Table Descriptions
Column	Description	Value
Log_time	Time when background process made a log entry	Datetime
Source	Program generating log entry	"system_monitor", "data_monitor"
Type	Type of message	INFORMATION, ELAPSED TIME, ERROR
Description	Message from the background process	A variable message followed by a number in parenthesis that represents the number of rows that processed. As an example, the message "Complete BGPLOG (40)" indicates that forty rows processed.

SYMON (System Monitor) Procedures

SYMON runs simple P6 EPPM tasks on a quick schedule. By default, the job runs every minute; the tasks assigned to this job should take only a few seconds to complete on each run. Do not change the scheduled run time (every minute) for this procedure.

Procedures performed by SYMON

The procedures run by SYMON perform these tasks:

4 Processing the PRMQUEUE entries for Project Security by queuing OBSPROJ updates to the PRMQUEUE table.

4 Marking expired USESSION records as logically deleted.

Note: You can manually run queries to assist you with tracking concurrent usage of P6 EPPM.

OBSPROJ_PROCESS_QUEUE Procedure

OBSPROJ_PROCESS_QUEUE processes the PRMQUEUE entries for Project Security. It defers processing of OBSPROJ updates by queuing the updates to the PRMQUEUE table.

Refer to the following table for information about the settings associated with the OBSPROJ_PROCESS_QUEUE procedure.

OBSPROJ_PROCESS_QUEUE Settings

Setting Description: Maximum project-level queue records to process on each run.
Namespace	database.obsproj.queue
Setting Name	MaxProjectUpdates
Default Setting	1000
Type	Numeric
Setting Description: Maximum EPS-level queue records to process on each run.
Namespace	database.obsproj.queue
Setting Name	MaxEpsUpdate
Default Setting	25
Type	Numeric
Setting Description: Maximum times to re-process a failed entry before marking it as an error.
Namespace	database.obsproj.queue
Setting Name	MaxRetries
Default Setting	50
Type	Numeric

 

       

USESSION_CLEANUP_EXPIRED Procedure

USESSION_CLEANUP_EXPIRED logically deletes USESSION records that have not updated their last_active_time based on the Expired Session settings. Marking expired USESSION records as logically deleted maximizes the number of module access logins that are available. Since it is not cleaning up the underlying data (physically deleting rows), the task completes quickly.

Values in the SETTINGS table control the clean up of expired sessions. By default, although the clean up of expired sessions occurs every two hours, the SETTINGS table does not contain a value for this setting. Use the SETTINGS_WRITE_STRING (value, namespace, setting) stored procedure to change the default clean up value.

For example, setting the value to "2d" deletes expired sessions older than two days.

Note: Oracle recommends that you set the ExpiredLongSessionTimeout sessions to at least one hour longer than your longest job. For example, if your longest job is a summarizer job that usually takes 12 hours, you should set the value in the SETTINGS table to at least 13.

Refer to the table below for information about the USESSION_CLEANUP_EXPIRED Settings.

       

USESSION_CLEANUP_EXPIRED Settings

Setting Description: ExpiredSessionTimeout determines how long an inactive user session will remain in the records before it is marked deleted. User sessions are created when a P6 user logs into P6.
Namespace	database.cleanup.Usession
Setting Name	ExpiredSessionTimeout
Default Setting	2h
Type	Interval
Setting Description: ExpiredLongSessionTimeout determines how long a session that is running a job-like operation (that is still processing) will remain in the records before it is marked deleted. Job-like operations are processed by job services and some are performed by logged in P6 users. Operations that are considered job-like are: 4 Scheduling 4 Leveling 4 Apply Actuals 4 Update Progress  4 Copy/Paste Project 4 Create Project from Template 4 Maintain Baselines (create new baseline) 4 Approve Timesheets 4 Summarize 4 PX Publish 4 Export 4 Import
Namespace	database.cleanup.Usession
Setting Name	ExpiredLongSessionTimeout
Default Setting	12h
Type	Interval

      

Tracking Concurrent Usage of P6 EPPM

To track concurrent usage of P6 EPPM, you can run queries against the USESSION and USESSAUD tables to perform self-audits. See sample queries below.

Note: See DAMON (Data Monitor) Procedures (on page 51) for information on how to set up the USESSAUD procedure. To ensure accuracy of these queries, run them before physically deleting remaining USESSION records and cleaning up the USESSAUD table.

4 Against the USESSION table, run the following query to determine how many users are logged in at a given time:

select count(*) from usession where delete_session_id is null

4 Against the USESSION table, run the following query to determine how many users are logged into a specific P6 EPPM product at a given time:

select count (*) from usession where delete_session_id is null and app_name='P6 EPPM product name' where P6 EPPM product name is the application abbreviation.

Note: You can view all available application abbreviations by running the following query as an administrative database user: select distinct(db_engine_type) from usereng

4 Against the USESSAUD table, run a query similar to the following to determine how many users logged into P6 EPPM on a specific date during a specified time range. You can alter the date, time range, and P6 EPPM product as needed. The following example will search for all users who logged into P6 Professional on February 17, 2010 between 9am and 10am: For an Oracle database:

select * from usessaud where login_date between to_date('17-FEB-10 09:00:00','DD-MON-YY HH:MI:SS') and to_date('17-FEB-10

10:00:00','DD-MON-YY HH:MI:SS') and app_name='Project Management'

For a Microsoft SQL Server database:

select * from usessaud where login_date between

'2010-02-17 09:00' and '2011-02-17 10:00' and app_name='Project Management'

Tips

See "Counting Users" in the P6 EPPM System Administration Guide for information on counting users and how to view the total number of licenses assigned for each module.

       

DAMON (Data Monitor) Procedures

The second database job is the DAMON data monitor job. The DAMON job runs the majority of the background processing and is responsible for running background clean up processes required by the application that can potentially take a relatively long time to run.

Oracle and DAMON

By default, DAMON runs every Saturday. It uses the Oracle DBMS_SCHEDULER package to schedule the jobs, and an Interval setting controls the schedule and accepts the same parameters as the DBMS_SCHEDULER interval. For more information, refer to your Oracle database documentation.

Microsoft SQL Server and DAMON

By default, DAMON runs every Saturday. You can set it to run every two weeks or on a specific day. To run DAMON every two weeks, use the following command to set the interval: -eg 2W

To set DAMON to run on a specific day, use the following setting under namespace:‘Database.background.Damon’ DayOfWeek

DAMON Procedures  DAMON cleans the:

4 BGPLOG table containing the background logs.

4 REFRDEL table.

4 PRMQUEUE table.

4 Remaining USESSION records.

4 Logically deleted records.

4 PRMAUDIT table.

4 USESSION audit table (USESSAUD).

You can also dynamically extend DAMON functionality via the user-defined procedure,

USER_DEFINED_BACKGROUND.

       

BGPLOG_CLEANUP Procedure

This procedure keeps the BGPLOG table at a reasonable size. The default cleanup interval is 5 days which will result in a table size of about 54,000 records.

Refer to the following table for information about the settings associated with the BGPLOG_CLEANUP procedure.

BGPLOG_CLEANUP Settings

Setting Description: The oldest records to keep in the BGPLOG table.
Namespace	database.cleanup.BackGroundProcessLog
Setting Name	KeepInterval
Default Setting	5d
Type	Interval

       

REFRDEL_CLEANUP Procedure

This procedure deletes records from the REFRDEL table. REFRDEL_CLEANUP runs based on the frequency of data_monitor_job, which has a default frequency of one week. Alternatively, you can run REFRDEL_CLEANUP by itself if needed.

Refer to the following table for information about the settings associated with the REFRDEL_CLEANUP procedure:

REFRDEL_CLEANUP Settings

Setting Description: Identifies the number of days that records are stored in the REFRDEL table before they can be removed. For example, the default setting keeps the REFRDEL records from the last five days.
Namespace	database.cleanup.Refrdel
Setting Name	KeepInterval
Default Setting	5d
Type	Interval
Setting Description: Identifies the number of days that are set to be removed from the REFRDEL table starting with the oldest record in the table.
Namespace	database.cleanup.Refrdel
Setting Name	DaysToDelete
Default Setting	1
Type	Numeric
Setting Description: Determines the intervals of time (in minutes) in which data is grouped and removed from the REFRDEL table. The number of IntervalSteps is equal to DaysToDelete (in minutes) divided by IntervalStep.
Namespace	database.cleanup.Refrdel
Setting Name	IntervalStep
Default Setting	15
Type	Numeric

REFRDEL Bypass Procedure

The REFRDEL table maintains a list of deleted records from P6 database tables. However, when an entire project is deleted, a large amount of detailed delete records can be inserted into the REFRDEL table resulting in the potential for downstream performance degradation when joins are made to the REFRDEL table.

The REFRDEL Bypass procedure is an alternative to inserting REFRDEL records for tracking delete records on a large scale. This procedure bypasses the REFRDEL table and simply adds a single delete record for a deleted project and project ID. 

By default, the REFRDEL BYPASS procedure is set to 0 (zero).

To enable REFRDEL Bypass, execute the following procedure and set to a non-zero value:

SQL> exec SET_REFRDEL_PROJECT_BYPASS(1);

Database triggers check for the value of the REFRDEL BYPASS value and process accordingly. 

Note: The bypass procedure is meant only for a PROJECT DELETE operations. 

       

CLEANUP_PRMQUEUE Procedure

This procedure deletes records from the PRMQUEUE table based on the value of the KeepInterval setting. The remaining settings are similar to the REFRDEL_CLEANUP.

Refer to the following table for information about the settings associated with the CLEANUP_PRMQUEUE procedure:

CLEANUP_PRMQUEUE Settings

Setting Description: The oldest records to keep in the PRMQUEUE table. Default is five days.
Namespace	database.cleanup.Prmqueue
Setting Name	KeepInterval
Default Setting	5d
Type	Interval
Setting Description: Determines whether the procedure will delete all of the PRMQUEUE records possible on each pass.
Namespace	database.cleanup.Prmqueue
Setting Name	DeleteAll
Default Setting	0 (false)
Type	Boolean
Setting Description: Determines whether all of the records are cleaned. If the total record count is less than this number then all the records are cleaned.
Namespace	database.cleanup.Prmqueue
Setting Name	DeleteAllThreshold
Default Setting	1,000
Type	Numeric
Setting Description: Percentage of records to delete on each pass.
Namespace	database.cleanup.Prmqueue
Setting Name	DeletePercentage

Default Setting	10(%)
Type	Numeric
Setting Description: Maximum rows to delete on each pass.
Namespace	database.cleanup.Prmqueue
Setting Name	MaxRowsToDelete
Default Setting	10,000
Type	Numeric

USESSION_CLEAR_LOGICAL_DELETES Procedure

This procedure physically deletes all logically deleted USESSION records. This procedure does not have settings associated with it: All logically deleted USESSION records are cleared.

CLEANUP_LOGICAL_DELETES Procedure

This procedure removes logically deleted rows based on the value of the KeepInterval setting. Records in the database can be marked as deleted (logically deleted) by setting the

DELETE_SESSION_ID column to a non-null value. By default, records that were deleted more than 5 days ago will be deleted by this procedure.

Notes: 

• The CLEANUP_LOGICAL_DELETES procedure will not delete records whose DELETE_SESSION_ID column is set to a negative value.
• This procedure will not delete records older than the earliest user session in USESSION, as determined by the minimum value in the login_date column.

Refer to the following table for information about the settings associated with the

CLEANUP_LOGICAL_DELETES procedure:

       

CLEANUP_LOGICAL_DELETES Settings

Setting Description: The oldest logically deleted records to keep in tables.
Namespace	database.cleanup.LogicalDelete
Setting Name	KeepInterval
Default Setting	5d
Type	Interval
Setting Description: Determines whether the procedure will delete all of the logically deleted records possible on each pass.
Namespace	database.cleanup.LogicalDelete
Setting Name	DeleteAll
Default Setting	0 (false)
Type	Boolean
Setting Description: Maximum rows to delete on each pass.
Namespace	database.cleanup.LogicalDelete
Setting Name	MaxRowsToDelete
Default Setting	10,000
Type	Numeric

      

PRMAUDIT_CLEANUP Procedure

If the auditing feature is enabled, this procedure will physically delete records from the table based on the value of the KeepInterval setting.

Refer to the following table for information about the settings associated with the PRMAUDIT_CLEANUP procedure:

PRMAUDIT_CLEANUP Settings

Setting Description: Should the procedure attempt PRMAUDIT records cleanup.
Namespace	database.cleanup.auditing
Setting Name	Enabled
Default Setting	1 (true)
Type	Boolean
Setting Description: The oldest audit records to keep in PRMAUDIT.
Namespace	database.cleanup.auditing
Setting Name	KeepInterval
Default Setting	30d
Type	Interval

       

CLEANUP_USESSAUD Procedure

The CLEANUP_USESSAUD procedure deletes records from the USESSAUD table based on the KeepInterval parameter setting. All other settings are similar to the REFRDEL_CLEANUP procedure. The following table describes the settings associated with the CLEANUP_USESSAUD procedure.

CLEANUP_USESSAUD Settings

Setting Description: Determines the oldest records to keep in the USESSAUD table. Based on the logout time, data beyond the KeepInterval parameter value will not deleted. The KeepInterval parameter setting overrides all other CLEANUP_USESSAUD settings.
Namespace	database.cleanup.Usessaud
Setting Name	KeepInterval
Default Setting	5d
Type	Interval
Setting Description: Deletes all the REFRDEL records that satisfy the KeepInterval setting on each pass. The DeleteAll parameter setting overrides the settings of DeleteAllThreshold, DeletePercentage, and MaxRowsToDelete parameters.
Namespace	database.cleanup.Usessaud
Setting Name	DeleteAll
Default Setting	0 (false)
Type	Boolean
Setting Description: Determines the minimum number of records to delete after satisfying the KeepInterval parameter setting. By default, a minimum of 1000 records are deleted. If the total record count is less than this setting, all records are deleted. The DeleteAllThreshold parameter setting overrides the settings of the DeletePercentage and MaxRowsToDelete parameters.
Namespace	database.cleanup.Usessaud
Setting Name	DeleteAllThreshold
Default Setting	1,000
Type	Numeric
Setting Description: Determines the maximum rows to delete on each pass after satisfying the KeepInterval parameter setting. The MaxRowsToDelete parameter setting overrides the DeletePercentage parameter setting.
Namespace	database.cleanup.Usessaud
Setting Name	MaxRowsToDelete
Default Setting	10,000
Type	Numeric
Setting Description: Determines the percentage of records to delete on each pass after satisfying the DeleteAllThreshold and MaxRowsToDelete settings. However, the percentage of records deleted is limited to the default value of the MaxRowsToDelete setting.
Namespace	database.cleanup.Usessaud
Setting Name	DeletePercentage
Default Setting	10 (%)
Type	Numeric

       

USER_DEFINED_BACKGROUND Procedure

This procedure is an optional customer procedure that DAMON runs. This procedure does not have settings associated with it.

Oracle Database Performance

You can modify several Oracle database settings to improve the performance of your P6 EPPM database. Run the scripts as described below after you create the database.

Grant access to the V_$TRANSACTION view:

V_$TRANSACTION is a system view in Oracle that lists the active transactions in the system.

GET_SAFETY DATE (a procedure in the Project Management schema) accesses this view to get the oldest start time of an active transaction. If the schema owner does not have privileges to this view, then it returns a safety date using the USESSION table. V_$Transaction tunes performance during a refresh action. USESSION records the login time of the logged in user, whereas data in the V_$Transaction view is recorded at a system level. The logged in user could be logged in for more than an hour (as seen from the USESSION table), but the V_$Transaction view has the current transaction datetime, regardless of the time the user logged in.

Note: Access to the V_$TRANSACTION view was built into the procedure to tune performance with refreshing operations; however, third party functions could impact performance with database refresh operations that use an older time in the V_$TRANSACTION view.

To grant access to this view, connect to Oracle as SYS. Run the RUN_AS_SYS.SQL script located in the Databasescriptscommon folder of the P6 EPPM physical media or download.

Gather statistics for cost-based optimization:

Oracle 11g and later supports only cost-based optimization, which relies on accurate statistics to determine the optimal access path for a query. To gather the appropriate statistics for the optimizer, which will improve database performance, run the ORPM_STATS_GATHER.SQL script located in the Databasescriptscommon folder of the P6 EPPM physical media or download.

Safe Deletes

The P6 EPPM database normally handles restoring select deleted data using a safe delete setting. While using P6 Professional, the Undo command (Edit, Undo) allows users to restore certain types of data that have been deleted. Deleted data remains in the P6 EPPM database until the CLEANUP_LOGICAL_DELETES procedure clears it (after 5 days, by default).

See the P6 Professional Help for more information about using undo.

Turning Off Safe Deletes

You can turn off safe deletes to save storage space. Turning off safe deletes disables undo functionality and instantly clears deleted data from the P6 EPPM database. 

To turn off safe deletes:

1)    Verify the current state of your safe deletes setting. In the database, if the table

ADMIN_CONFIG has the following row, a CONFIG_VALUE of 'N' means turn off safe deletes.

CONFIG_NAME = 'SAFEDELETE.ACTIVE' and CONFIG_TYPE = 'SETTINGS'

Note: This is only loaded at startup. If you change CONFIG_VALUE while a user is running P6 Professional, the setting will not apply until the user restarts the P6 Professional session.

2)    Once you have determined the current state of your safe deletes setting, run one of the following statements.

4 To turn off safe deletes for the first time:

INSERT INTO ADMIN_CONFIG (CONFIG_NAME, CONFIG_TYPE, CONFIG_VALUE)

VALUES ('SAFEDELETE.ACTIVE', 'SETTINGS', 'N')

4 To turn on safe deletes after it has been turned off:

UPDATE ADMIN_CONFIG SET CONFIG_VALUE = 'Y' WHERE CONFIG_NAME =

'SAFEDELETE.ACTIVE' AND CONFIG_TYPE = 'SETTINGS'

4 To turn off safe deletes after it has been turned on:

UPDATE ADMIN_CONFIG SET CONFIG_VALUE = 'N' WHERE CONFIG_NAME =

'SAFEDELETE.ACTIVE' AND CONFIG_TYPE = 'SETTINGS'

3)    Restart the P6 server.

PRMAUDIT Auditing

PRMAUDIT  auditing permits you to log the edits, additions, and deletions made by users of P6

EPPM applications. When users make changes, they create a Data Manipulation Language

(DML) INSERT, UPDATE, or DELETE statement. PRMAUDIT auditing uses the Data

Manipulation Language (DML) INSERT, UPDATE, or DELETE statement being executed against tables in the database schema. Since every application table in the schema has its own auditing trigger, you can log changes made to each table regardless of who made the change or when the change was made. The database schema owner owns the auditing trigger: you can bypass trigger execution.

       

Auditing Level Configuration

You can adjust the amount of information that is logged by adjusting the audit level for each table. You can refine the audit further by setting the audit level individually for insert, updates, and deletes within each table.

Auditing Levels

Level	Description
Level 0	No audit.
Level 1	Row-level audit. Audit only the operation without column details
Level 2	Column-level Audit without blobs. Audit changes to the data at the column level but without blob changes
Level 3	Full Audit. Audit changes to the data at the column level. For Oracle, column level changes to blobs are audited. For Microsoft SQL server, column level changes to blobs are not included.

Simple Configuration

You can use two configuration procedures to provide simple control of the auditing feature:

4 auditing_enable(table_name, level) 4 auditing_disable(table_name)

You can set the audit level on an individual table or the same audit level for all of the tables. However, the simple configuration procedures do not allow for setting individual auditing levels for insert, update, or delete operations within a table.

Examples for Oracle:

Use the following examples as a guide to use the simple audit configuration procedures to control the auditing feature.

4 The following code snippet enables full auditing on all tables: exec auditing_enable(null,3);

4 The following code snippet enables level one auditing on the task table:

exec auditing_enable('TASK',1);

4 The following code snippet disables auditing on PROJWBS:

exec auditing_disable('PROJWBS');

4 The following code snippet completely disables auditing across the entire database: exec auditing_disable(null);

Detailed Configuration

You can configure auditing trigger behavior by changing values in the settings table that enable or disable:

4 The auditing feature itself

4 The auditing of specific tables

4 The auditing of table insert, update, or delete operations within each table

You can enable or disable the auditing feature by using the database.audit.Enable setting. Use the settings_write_bool procedure to enable/disable the auditing feature.

Oracle Example:

To enable the auditing feature in Oracle, use the following code:

exec settings_write_bool(1,'database.audit','Enabled');

Microsoft SQL Server Example:

To enable the auditing feature in Microsoft SQL Server, use the following code: exec settings_write_bool 1,'database.audit','Enabled'

       

Options Setting

Each table's auditing settings are controlled by the Options setting in each table's auditing namespace (for example, database.audit.TASK). The Options setting is a three character string with a numeric value in each character position representing the audit level for insert, update, and delete.

Auditing Level Options Setting by Table Operation
	Operation
	Insert	Update	Delete	Description
Level	0	0	0	No audit.
	1	1	1	Row-level audit. Audit only the operation without column details.
	2	2	2	Column-level audit without blobs. Audit changes to the data at the column level but without blob changes.
	3	3	3	Full Audit. Audit changes to the data at the column level. For Oracle, column level changes to blobs are audited. For Microsoft SQL server, column level changes to blobs are not included.

The following table provides some examples of the options setting:

Setting the Auditing Level Options Setting by Table Operation Examples
Namespace	Setting	Value	Description
database.audit.TASK	Options	330	Fully audit any insert and update operations. Do not audit any delete operations.
database.audit.PROJWBS		001	Row-level audit on deletes only.
database.audit.TASKRSRC		333	Fully audit.

SETTINGS_WRITE_STRING Procedure

You can change table audit settings using the settings_write_string procedure.

Oracle Example:

To set the table settings to fully audit insert and update operations but ignore any delete operations, use the following code for Oracle:

exec settings_write_string('330','database.audit.TASK','Options');

Microsoft SQL Server Example:

To set the table settings to fully audit insert and update operations but ignore any delete operations, use the following code for Microsoft SQL Server:

exec settings_write_string '330','database.audit.TASK','Options'

Note: Changes to auditing settings will not appear immediately in the application. The program will need to close the database connection and then reconnect to the database to get the new settings.

                   

The Audit Table

Audit records are inserted into the PRMAUDIT table. One record is inserted into the audit table for each row changed in the database.

PRMAUDIT Table
Column	Type	Description
audit_date	Date	Date and time of change
table_name	String(30)	Table Name
pk1, pk2, pk3, pk4	String(255)	Primary key values for audited record
oper	String(1)	I=Insert, U=Update, D=Delete
prm_user_name	String(32)	P6 EPPM user name if the change was made in P6 EPPM applications
audit_info	String(4000)	Column changes up to 4000 characters (Level 2 and 3 only)
audit_info_extended	BLOB	Blob changes and overflow from audit_info (Level 2 and 3 only)
logical_delete_flag	String(1)	Flag for deletes that are logical (marked) rather than a physical delete
rdbms_user_name*	String(255)	Database user name (usually privuser)
os_user_name*	String(255)	Operating system user name of connected session Note: When auditing is enabled against a SQL Server database, PRMAUDIT.os_user_name will always return a null value.  This is because the value for os_user_name in PRMAUDIT table is taken from the nt_username column in master.sys.sysprocesses view and the nt_username value in master.sys.sysprocesses view is empty for the P6 Professional program because P6 is connected to SQL DB using SQL authentication. The nt_username field is filled only

		when we connect to SQL DB using Windows authentication.
program*	String(255)	Name of program connecting to the database
host_name*	String(255)	Computer name of connected session
app_name*	String(25)	Name of application connected to the database
netaddress*	String(24)	IP or MAC address of connected session

Note: Grant select privileges to the administrative user on V_$SESSION to ensure correct values for several auditing table values.

Session Auditing

Activity for the USESSION table is audited with its own trigger and table. When an application user logs out of the system they logically delete, or mark, their session record in the USESSION table. One record is written to the USESSAUD table for each logout. The format of the USESSAUD table mirrors that of the USESSION table. This audit can be enabled using the usessaud_enable procedure and disabled using the usessaud_disable procedure.

Column Audit Data

The data changes for each audit are stored in the audit_info and audit_info_extended columns. The audit_info column contains all the row changes as long as they do not exceed 4000 characters. Changes over 4000 characters or any edit to a blob will be written to the audit_info_extended BLOB column.

Data in the two audit_info columns has a specific format. Each column audit within the data begins with either ":O" (old data) or ":N" (new data) to distinguish between the audit of the previous (old) or the changed (new) value (for BLOB columns the data starts with :BLOBO or :BLOBN). Directly after this is the name of the column in lowercase. Following the column name is the length of the audited value in a fixed four character field. Finally the actual data is placed in the audit record. Updates will have both an old and new value for each change. Inserts will have only a new value and deletes only an old value.

The following is an example of the audit record for TASK to change the task_code from 'A1010' to

'B102:'

audit_info =>:Otask_code: 5:A1010:Ntask_code: 4:B102

Using the Data Pump Utility

The data pump utility is a java-based tool that enables you to migrate data from a Microsoft SQL Server database to an Oracle database.

Use the data pump utility to:

4 Import data into a newly created database.

4 Repair a damaged database to correct database object issues (such as constraints or views).

Do not use the data pump utility to:

4 Convert the database type from EPPM to PPM or from PPM to EPPM.

4 Upgrade from one database version to another.

4 Import data into an existing database.

4 Correct data-specific issues.

4 Correct schema-related issues. It is not ideal for large databases (more than 10 GB) due to the performance of the utility. For larger databases, try first to manually resolve schema-related issues.

Before running the data pump utility, you must first run a schema validation on the database. See Running a Schema Validation on the Database (on page 70) for details.

       

Running a Schema Validation on the Database

The schema validation utility finds missing, extra, and modified schema objects for a P6 database. 

To run a schema validation, complete the following steps:

1)    In the software download, locate the utility in the Database Download folder.

2)    Edit the utility similar to the following:

@echo off

REM --------------------------------------

REM Run the Primavera Schema Validation Tool

REM --------------------------------------

SET JAR_FILE_DIR=lib

SET JAR_FILE_NAME=dbmt.jar

SET DB_SCHEMA=ppm

SET JVM_PROPERTIES=-Ddbmt.dbschema.package.location=%JAR_FILE_DIR%

-Dprimavera.db.schema=%DB_SCHEMA%

-Dcom.primavera.database.logfile=SchemaValidation.log

SET DBMT_ACTION=application/ppmschemaval SET DBMT_COMMAND=schemavalpm set JAVA_HOME=C:Program FilesJavajre6 IF NOT EXIST "%JAVA_HOME%injava.exe" (  echo JAVA_HOME IS NOT SET  pause  goto :EXIT )

3)    Run validate.bat (with Windows) or validate.sh (with UNIX or Linux).

4)    For an Oracle database in an Enterprise environment, enter values for the following:

4 Username: Use the appropriate ADMUSER username and password.

4 Database host address: Database server name or IP address.

4 Database host port: The port your Oracle listener is listening on. The default port is 1521.

4 Database name (SID): Enter the Oracle SID for your database. For a SQL Server 2005 database, enter values for the following:

4 Database host address: Database server name or IP address.

4 Database host port: The SQL port.

4 Database name: pmdb$primavera (default)

Note: When running for an Enterprise version of the database, you will be prompted for the appropriate privileged and public usernames.

5)    Review the results of the schema validation utility that display in the browser.

       

Running the Data Pump Utility Using the Wizard

To run the data pump utility using the wizard, complete the following steps:

Note: Skip the first two steps if you are using a Microsoft SQL Server Database.

1)    From the command line, execute: sqlplus sys/password@<db_tns_names_entry> as sysdba

2)    Go to p6suitedatabasescriptsinstallPM_<release_level>, and execute manual_script_before_install.sql.

3)    Go to the <P6_EPPM_Home>database folder.

4)    Run migrate.bat (with Windows) or migrate.sh (with UNIX or Linux).

5)    Follow the prompts on each screen to provide connection information for the source database and the target database.

Note: When using an Oracle schema, the migration utility allows you to create new tables or use existing tables in the target instance, but new schema users must be created through the migration process. The ability to map to existing schema users is not currently available through the migration process.

                   

Running the Data Pump Utility From the Command Line

Note: Do not use the data pump utility to convert the database type from EPPM to PPM or from PPM to EPPM.

To run the data pump utility from the command line, complete the following steps:

1)    Open a new command line console.

2)    Go to installdatabase.

3)    Run the command with the following parameters to define the migration: With Windows

migrate.bat -source sa/sa@sqlserver:rcgsrv:1433:vader_pmdb -target system/manager@oracle:rcgsrv:1521:rcg02 -db PM

With Windows (Creating Non-Default Oracle Users)

migrate.bat -source sa/sa@sqlserver:rcgsrv:1433:vader_pmdb -target system/manager@oracle:rcgsrv:1521:rcg02 -db PM -admuser admjeff -privuser privjeff -pubuser pubjeff

With UNIX or Linux

sh migrate.sh -source sa/sa@sqlserver:saumverm-lapprimavera:1433:PMDB -dattbsp <Name of data tblspc at target> -ndxtbsp <Name of index tblspc at target> -pxtbsp

<Name of px tblspc at target> -lobtbsp <Name of LOB tblspc at target> -admuser <admuser at target> -admpass <admuser password at target> -privuser <privuser at target> -privpass <privuser password at target> -pubuser <pubuser at target> -pubpass <pubuser password at target> -pxrptuser <pxrptuser at target> -pxrptpass

<pxrptuser password at target> -bgjobuser <bgjobuser at target> -bgjobpass

<bgjobuser password at target> -target system/admin@oracle:oldb-orcl:1521:PMDB For example:

sh migrate.sh -source sa/sa@sqlserver:saumverm-lapprimavera:1433:PMDB -dattbsp PMDB_DAT1 -ndxtbsp PMDB_NDX1 -pxtbsp PMDB_PX_DAT1 -lobtbsp PMDB_LOB1 -admuser admuser -admpass admuser -privuser privuser -privpass privuser -pubuser pubuser -pubpass pubuser -pxrptuser pxrptuser -pxrptpass pxrptuser -bgjobuser bgjobuser -bgjobpass bgjobuser -target system/admin@oracle:oldb-orcl:1521:PMDB

       

Where To Go From Here - Post Configuration Wizard

Now that you've installed all of your P6 EPPM applications, you can begin using P6. You may find the following guides useful to get started:

4 P6 EPPM System Administration Guide

Note: You can use this guide to configure E-mail Statusing Service.

4 P6 EPPM Application Administration Guide

4 P6 Help

Note: The most recent version of all these guides are available on OTN.

In This Section

Launching Your P6 EPPM Applications ................................................................... 74

Settings You Must Configure in P6 Before You Begin .............................................. 77

Installing Additional Applications .............................................................................. 78

      

Launching Your P6 EPPM Applications

After you have installed and configured your P6 EPPM applications, you can launch your applications by doing the following:

1)    Go to the scripts folder where you installed P6 EPPM (for example, C:P6EPPM_1scripts or /usr/P6EPPM_1/scripts).

2)    If you are on Windows, launch the start_Primavera.bat. If you are on Linux, launch the start_Primavera.sh.

Note: You need to launch the file only once unless you stop the server or need to restart the machine.

3)    Open the HTML file you saved when you finished your configuration and choose the URL for the application you want to launch. 4) Login to the application.

Tips

4 If you are on Windows, you can use the Start menu to launch your applications.

1. Go to Start, P6 EPPM.
2. Select the start_Primavera.bat file and wait for it to say running.
3. Select the application you want to launch and login.

4 If you want to set up the WebLogic Admin Server and Managed Servers to run as Windows       Services, see WebLogic's documentation.                  

Starting and Stopping Managed Servers

You have several options for starting and stopping managed servers. Oracle recommends that you use the startNodeManager file and start the server in the WebLogic Administration Console (see Starting a Managed or Clustered Server (on page 76)). However, you can view other ways to stop and start managed servers at "Managing Server Startup and Shutdown for Oracle WebLogic Server" at http://download.oracle.com/docs/cd/E14571_01/web.1111/e13708/overview.htm.

Note: You can use different ways to start the managed servers, but you must ensure that the managed servers recognize the arguments required for your application (for example, the argument for where the bootstrap is located) and how the application environment will start.

                    

Starting a Managed or Clustered Server

To start a managed or clustered server in the WebLogic Administration Console:

Note: When starting/stopping an environment using the node manager, the StartScriptEnabled setting in the nodemanager.properties file must equal true. Example: StartScriptEnabled=true

1)    Run the startNodeManager file.

4 In Windows, the file is named "startNodeManager.cmd" and is located in: weblogic_homeserverin

4 With Unix or Linux, the file is named "startNodeManager.sh" and is located in: weblogic_homeserverin

2)    Launch the WebLogic Administration Console.

Note: You can open the Administration Console via a web browser using this address: http://serverIP:listenport/console. The default listenport is 7001.

3)    In the Welcome window, log in using the user name and password that you created when you created your WebLogic domain.

4)    In the Change Center pane of the Administration Console, click Lock & Edit.

5)    In the Domain Structure pane:

1. Expand Environment.
2. Click Servers.

6)    In the Summary of Servers pane:

1. Select the Control tab.
2. Select the option for your managed server.
3. Click Start.

7)    In the Server Life Cycle Assistant pane, click Yes.

8)    In the Summary of Servers pane, click the 'Start Refresh' icon in the middle of the pane to see when the State column says 'RUNNING.'

       

Your managed or clustered server will stop running when you close the startNodeManager file.

You can also stop the managed or clustered server in the WebLogic Administration Console.

1)    Launch the WebLogic Administration Console.

Note: You can open the Administration Console via a web browser using this address: http://serverIP:listenport/console. The default listenport is 7001.

2)    In the Welcome window, log in using the user name and password that you created when you created your WebLogic domain.

3)    In the Change Center pane of the Administration Console, click Lock & Edit.

4)    In the Domain Structure pane:

1. Expand Environment.
2. Click Servers.

5)    In the Summary of Servers pane:

1. Select the Control tab.
2. Select the option for your managed server.
3. Click the down arrow to the right of the Shutdown button.
4. Click When work completes or Force Shutdown Now.

6)    In the Server Life Cycle Assistant pane, click Yes.

7)    In the Summary of Servers pane, click the 'Start Refresh' icon in the middle of the pane to see when the State column says 'SHUTDOWN.'

Settings You Must Configure in P6 Before You Begin

The following lists things you must set in P6 before you begin using it. Use the P6 EPPM System Administration Guide and the P6 EPPM Application Administration Guide for instructions on how to set the following:

4 Set the base currency

Note: You must choose the base currency if you do not want the database to use US dollars ($) as the base currency. You cannot change the base currency once projects are in progress.

4 Add users and assign them the appropriate security privileges.

4 Configure the Primavera P6 Administrator for your environment.     

Installing Additional Applications

The following applications will work with P6 EPPM, but are not installed or configured with the wizard. See the guides mentioned for more information about each product.

4 P6 Professional (see the P6 Professional Installation and Configuration Guide)

4 Oracle Identity Manager (see P6 EPPM Oracle Identity Manager Configuration Guide)

4 Oracle Enterprise Manager (see Primavera Oracle Enterprise Manager Configuration Guide)

4 Oracle Access Manager (see Primavera Oracle Access Manager Configuration Guide)

4 Oracle BI Publisher (see P6 EPPM BI Publisher Configuration Guide)

4 Oracle BPM (see P6 EPPM BPM Configuration Guide)

       

For More Information

For More Information

Where to Get Documentation

Complete documentation libraries for P6 EPPM releases are available on the Oracle Technology Network (OTN) at: http://www.oracle.com/technetwork/documentation/primavera-093289.html

From this location you can either view libraries online or download them to have local copies. We recommend viewing them from OTN to ensure you always access the latest versions, including critical corrections and enhancements. 

The documentation assumes a standard setup of the product, with full access rights to all features and functions.

Help System Access

P6 EPPM is configured to access its help systems on OTN. However, downloadable versions of the help systems are also available on OTN if you need to download, deploy, and access a local copy.

Documentation Accessibility

For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website at http://www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc.

Access to Oracle Support

Oracle customers that have purchased support have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=info or visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs if you are hearing impaired.

Where to Get Training

To access comprehensive training for all Primavera products, go to: http://education.oracle.com

Oracle Learning Library

The Oracle Learning Library (OLL) provides online learning content covering Primavera products. Content includes whitepapers, videos, tutorials, articles, demos, step-by-step instructions to accomplish specific tasks, and self-paced interactive learning modules.

To access the learning library’s Primavera content, go to: 

http://www.oracle.com/oll/primavera

Where to Get Support

If you have a question about using Oracle products that you or your network administrator cannot resolve with information in the documentation or help, click http://support.oracle.com. This page provides the latest information on contacting Oracle Global Customer Support, knowledge articles, and the support renewals process. For more information about working with Support, visit https://support.oracle.com/epmos/faces/DocumentDisplay?id=888813.2 to view Support Tools & Tips.

Using Primavera's Support Resource Centers

Primavera’s Support Resource Center provides links to important support and product information. Primavera's Product Information Centers (PICs) organize documents found on My Oracle Support (MOS), providing quick access to product and version specific information such as important knowledge documents, Release Value Propositions, and Oracle University training. PICs also offer documentation on Lifetime Management, from planning to installs, upgrades, and maintenance.

Visit https://support.oracle.com/epmos/faces/DocumentDisplay?id=1486951.1 to access links to all of the current PICs. PICs also provide access to:

4 Communities which are moderated by Oracle providing a place for collaboration among industry peers to share best practices. 

4 News from our development and strategy groups.

4 Education via a list of available Primavera product trainings through Oracle University. The Oracle Advisor Webcast program brings interactive expertise straight to the desktop using Oracle Web Conferencing technology. This capability brings you and Oracle experts together to access information about support services, products, technologies, best practices, and more.

Creating a Service Request

P6 EPPM integrates with different Oracle applications; when you create a Service Request, be sure to open the request with the proper Support team. To ensure you reach the proper Support team, enter the correct product information when you create the Service Request. Each product has its own support line. 

4 Use the Primavera P6 EPPM support line when you are having installation, configuration, or connection issues related to P6 EPPM.

4 Use one of the following support lines when you are having installation or configuration issues that do not relate to P6 EPPM.

4 Oracle WebLogic Server

4 Oracle Database Server

4 BI Publisher

4 BPM

4 Oracle WebCenter Content Core Capabilities (formerly Universal Content Management) 4 Oracle Enterprise Manager

For More Information

4 Oracle Access Manager

4 Oracle AutoVue

Keeping Your Software Up to Date

To ensure you have the latest versions of your products, be sure to download and install all available patch sets from http://support.oracle.com.

Finding Security-related Patches

To get the latest information about Critical Patch Updates, visit http://www.oracle.com/technetwork/topics/security/alerts-086861.html.

Legal Notices

Oracle Primavera P6 EPPM Installation and Configuration Guide

Copyright © 1999, 2016, Oracle and/or its affiliates. All rights reserved.

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable: 

U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are “commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.

This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate failsafe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.

This software or hardware and documentation may provide access to or information on content, products and services from third-parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services.

                                                                                                                                                  82