zoukankan      html  css  js  c++  java
  • zoj3545Rescue the Rabbit (AC自动机+状压dp+滚动数组)

    Time Limit: 10 Seconds      Memory Limit: 65536 KB

    Dr. X is a biologist, who likes rabbits very much and can do everything for them. 2012 is coming, and Dr. X wants to take some rabbits to Noah's Ark, or there are no rabbits any more.

    A rabbit's genes can be expressed as a string whose length is l (1 ≤ l ≤ 100) containing only 'A', 'G', 'T', 'C'. There is no doubt that Dr. X had a in-depth research on the rabbits' genes. He found that if a rabbit gene contained a particular gene segment, we could consider it as a good rabbit, or sometimes a bad rabbit. And we use a value W to measure this index.

    We can make a example, if a rabbit has gene segment "ATG", its W would plus 4; and if has gene segment "TGC", its W plus -3. So if a rabbit's gene string is "ATGC", its W is 1 due to ATGC contains both "ATG"(+4) and "TGC"(-3). And if another rabbit's gene string is "ATGATG", its W is 4 due to one gene segment can be calculate only once.

    Because there are enough rabbits on Earth before 2012, so we can assume we can get any genes with different structure. Now Dr. X want to find a rabbit whose gene has highestW value. There are so many different genes with length l, and Dr. X is not good at programming, can you help him to figure out the W value of the best rabbit.

    Input

    There are multiple test cases. For each case the first line is two integers n (1 ≤ n ≤ 10),l (1 ≤ l ≤ 100), indicating the number of the particular gene segment and the length of rabbits' genes.

    The next n lines each line contains a string DNAi and an integer wi (|wi| ≤ 100), indicating this gene segment and the value it can contribute to a rabbit's W.

    Output

    For each test case, output an integer indicating the W value of the best rabbit. If we found this value is negative, you should output "No Rabbit after 2012!".

    Sample Input

    2 4
    ATG 4
    TGC -3
    
    1 6
    TGC 4
    
    4 1
    A -1
    T -2
    G -3
    C -4

    Sample Output

    4
    4
    No Rabbit after 2012!

    Hint

    case 1:we can find a rabbit whose gene string is ATGG(4), or ATGA(4) etc.
    case 2:we can find a rabbit whose gene string is TGCTGC(4), or TGCCCC(4) etc.
    case 3:any gene string whose length is 1 has a negative W.


    题意:给你n个模板串,每一个模板串对应一个数值,有正也有负,然你构造一个长度为m的模板串,使得模板串的价值最大,且一种模板串如果重复出现只统计一次。

    思路:考虑到n<=10,所以用状压dp的思想,设状态为dp[i][j][state]表示走了i步,当前节点为j,含有的单词状态为state的最大值。但是这个状态消耗的内存太大,有100*1000*1024,所以用滚动数组(这点是看了别人的题解才发现的,果然意识不够啊..= .=),然后构造trie图,dp就行了。

    #include<iostream>
    #include<stdio.h>
    #include<stdlib.h>
    #include<string.h>
    #include<math.h>
    #include<vector>
    #include<map>
    #include<set>
    #include<queue>
    #include<stack>
    #include<string>
    #include<algorithm>
    using namespace std;
    typedef long long ll;
    #define inf 99999999
    #define pi acos(-1.0)
    #define maxnode 1100
    int t0,t1,t2,t3;
    char s[14],str[50];
    int cas=0;
    int dp[2][1005][1030],w[1030];
    int n,m;
    
    struct trie{
        int sz,root,val[maxnode],next[maxnode][4],fail[maxnode];
        int q[1111111];
        void init(){
            int i;
            sz=root=0;
            val[0]=0;
            for(i=0;i<4;i++){
                next[root][i]=-1;
            }
        }
        int idx(char c){
            if(c=='A')return 0;
            if(c=='C')return 1;
            if(c=='T')return 2;
            if(c=='G')return 3;
        }
        void charu(char *s,int index){
            int i,j,u=0;
            int len=strlen(s);
            for(i=0;i<len;i++){
                int c=idx(s[i]);
                if(next[u][c]==-1){
                    sz++;
                    val[sz]=0;
                    next[u][c]=sz;
                    u=next[u][c];
                    for(j=0;j<4;j++){
                        next[u][j]=-1;
                    }
                }
                else{
                    u=next[u][c];
    
                }
    
            }
            val[u]|=(1<<index-1);
        }
    
        void build(){
            int i,j;
            int front,rear;
            front=1;rear=0;
            for(i=0;i<4;i++){
                if(next[root][i]==-1 ){
                    next[root][i]=root;
                }
                else{
                    fail[next[root][i] ]=root;
                    rear++;
                    q[rear]=next[root][i];
                }
            }
            while(front<=rear){
                int x=q[front];
                val[x]|=val[fail[x] ];
                front++;
                for(i=0;i<4;i++){
                    if(next[x][i]==-1){
                        next[x][i]=next[fail[x] ][i];
    
                    }
                    else{
                        fail[next[x][i] ]=next[fail[x] ][i];
                        rear++;
                        q[rear]=next[x][i];
                    }
                }
            }
        }
        void solve(){
            int i,j,state,t,state1;
            for(j=0;j<=sz;j++){
                for(state=0;state<(1<<n);state++){
                    dp[0][j][state]=dp[1][j][state]=-inf;
                }
            }
            int tot=0;
            dp[tot][0][0]=0;
            for(i=0;i<m;i++){
                for(j=0;j<=sz;j++){
                    for(state=0;state<(1<<n);state++){
                        if(dp[tot][j][state]==-inf)continue;
                        for(t=0;t<4;t++){
                            state1=(state|val[next[j][t] ]);
                            dp[1^tot ][next[j][t] ][state1]=max(dp[1^tot ][next[j][t] ][state1],w[state1]  );
                        }
                    }
                }
                tot=1^tot;
                for(j=0;j<=sz;j++){
                    for(state=0;state<(1<<n);state++){
                        dp[1^tot][j][state]=-inf;
                    }
                }
            }
            int maxx=-inf;
            for(j=0;j<=sz;j++){
                for(state=0;state<(1<<n);state++){
                    maxx=max(maxx,dp[tot][j][state]);
                }
    
            }
            if(maxx<0){
                printf("No Rabbit after 2012!
    ");
            }
            else printf("%d
    ",maxx);
        }
    }ac;
    
    
    int main()
    {
        int i,j;
        int value[20],len,state;
        while(scanf("%d%d",&n,&m)!=EOF)
        {
            ac.init();
            for(i=1;i<=n;i++){
                scanf("%s%d",&s,&value[i]);
                len=strlen(s);
                if(len>m)continue;
                ac.charu(s,i);
            }
            for(state=0;state<(1<<n);state++){
                w[state]=0;
                for(i=1;i<=n;i++){
                    if(state&(1<<(i-1) )){
                        w[state]+=value[i];
                    }
                }
            }
            ac.build();
            ac.solve();
        }
        return 0;
    }
    


  • 相关阅读:
    异常处理
    创建数据库的连接(不同的方法)
    PDO类的封装
    理论的认知
    toolBar
    发送指内容的短信
    KVO tableView header悬浮效果
    KVO
    cocoaPods 真机报错
    cocoaPods 部署本版和项目部署版本不一致的错误
  • 原文地址:https://www.cnblogs.com/herumw/p/9464559.html
Copyright © 2011-2022 走看看