zoukankan      html  css  js  c++  java
  • 每天一个linux命令(netstat)

    netstat----监控、显示网络连接,路由表,接口状态,伪装连接,网络链路信息和组播成员

      格式:netstat [选项]

      主要功能:

    1.监控TCP/IP网络

    2.显示路由表、实际的网络连接以及每个网络接口设备的状态信息

    3.查询端口

      主要参数:

    -a:列出所有端口

    [root@root ~]# netstat -a
    Active Internet connections (servers and established)
    Proto Recv-Q Send-Q Local Address           Foreign Address         State
    tcp        0      0 0.0.0.0:ssh             0.0.0.0:*               LISTEN
    tcp        0     52 root:ssh                113.67.73.63:50453      ESTABLISHED
    tcp        0      0 root:42866              100.100.30.25:http      ESTABLISHED
    udp        0      0 0.0.0.0:bootpc          0.0.0.0:*
    udp        0      0 root:ntp                0.0.0.0:*
    udp        0      0 root:ntp                0.0.0.0:*
    udp        0      0 localhost:ntp           0.0.0.0:*
    udp        0      0 0.0.0.0:ntp             0.0.0.0:*
    udp        0      0 0.0.0.0:17859           0.0.0.0:*
    udp6       0      0 [::]:ntp                [::]:*
    udp6       0      0 [::]:46450              [::]:*

    -i:显示所有网络接口列表

    [root@root ~]# netstat -i
    Kernel Interface table
    Iface      MTU    RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR Flg
    docker0   1500        1      0      0 0             0      0      0      0 BMU
    eth0      1500   182518      0      0 0        118854      0      0      0 BMRU
    lo       65536        0      0      0 0             0      0      0      0 LRU

    -g:显示IPv4和IPv6的igmp多重广播功能群组成员关系信息

    [root@root ~]# netstat -g
    IPv6/IPv4 Group Memberships
    Interface       RefCnt Group
    --------------- ------ ---------------------
    lo              1      all-systems.mcast.net
    eth0            1      all-systems.mcast.net
    docker0         1      all-systems.mcast.net
    lo              1      ff02::1
    lo              1      ff01::1
    eth0            1      ff02::1
    eth0            1      ff01::1
    docker0         1      ff02::1
    docker0         1      ff01::1

    -l:显示监控中的服务器的端口

    [root@root ~]# netstat -nl
    Active Internet connections (only servers)
    Proto Recv-Q Send-Q Local Address           Foreign Address         State
    tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN
    udp        0      0 0.0.0.0:68              0.0.0.0:*
    udp        0      0 172.17.0.1:123          0.0.0.0:*
    udp        0      0 172.18.4.53:123         0.0.0.0:*
    udp        0      0 127.0.0.1:123           0.0.0.0:*
    udp        0      0 0.0.0.0:123             0.0.0.0:*
    udp        0      0 0.0.0.0:17859           0.0.0.0:*
    udp6       0      0 :::123                  :::*
    udp6       0      0 :::46450                :::*

    -M:显示所有伪装的网络连线

    -n:直接使用ip地址而不是通过域名服务器

    [root@root ~]# netstat -n
    Active Internet connections (w/o servers)
    Proto Recv-Q Send-Q Local Address           Foreign Address         State
    tcp        0     52 172.18.4.53:22          113.67.73.63:50453      ESTABLISHED
    tcp        0      0 172.18.4.53:42866       100.100.30.25:80        ESTABLISHED
    [root@root ~]# netstat
    Active Internet connections (w/o servers)
    Proto Recv-Q Send-Q Local Address           Foreign Address         State
    tcp        0     52 root:ssh                113.67.73.63:50453      ESTABLISHED
    tcp        0      0 root:42866              100.100.30.25:http      ESTABLISHED

    -p:显示PID和进程名称

    -r:显示内核路由表

    --与route -r对比
    [root@root ~]# netstat -r
    Kernel IP routing table
    Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
    default         gateway         0.0.0.0         UG        0 0          0 eth0
    link-local      0.0.0.0         255.255.0.0     U         0 0          0 eth0
    172.17.0.0      0.0.0.0         255.255.0.0     U         0 0          0 docker0
    172.18.0.0      0.0.0.0         255.255.240.0   U         0 0          0 eth0
    [root@root ~]# route -n
    Kernel IP routing table
    Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
    0.0.0.0         172.18.15.253   0.0.0.0         UG    0      0        0 eth0
    169.254.0.0     0.0.0.0         255.255.0.0     U     1002   0        0 eth0
    172.17.0.0      0.0.0.0         255.255.0.0     U     0      0        0 docker0
    172.18.0.0      0.0.0.0         255.255.240.0   U     0      0        0 eth0

    -s:显示网络工作信息统计表

    Ip:
        123318 total packets received
        0 forwarded
    Icmp:
        381 ICMP messages received
        57 input ICMP message failed.
        ICMP input histogram:
            destination unreachable: 91
            timeout in transit: 2
            echo requests: 287
            timestamp request: 1
        288 ICMP messages sent
        0 ICMP messages failed
        ICMP output histogram:
            echo replies: 287
            timestamp replies: 1
    .........
    -t:显示tcp传输协议连线情况
    [root@root ~]# netstat -t
    Active Internet connections (w/o servers)
    Proto Recv-Q Send-Q Local Address           Foreign Address         State
    tcp        0     52 root:ssh                113.67.73.63:50453      ESTABLISHED
    tcp        0      0 root:ssh                113.67.73.63:50395      ESTABLISHED
    tcp        0      0 root:42866              100.100.30.25:http      ESTABLISHED

    -u:显示udp传输协议的连线情况


      示例:

    1.显示所有端口

    netstat –a

    2.查询某个端口的信息

    netstat –anp | grep 22

    3.查看服务

    netstat –anp | grep ssh

  • 相关阅读:
    UIView的常见属性
    Object-C-Foundation-反射
    Object-C-自定义类型归档
    Java集合:HashMap源码剖析
    spring-boot-2.0.3之quartz集成,数据源问题,源码探究
    杂谈篇之我是怎么读源码的,授之以渔
    ElasticSearch 从零到入门
    java实现图片上传功能,并返回图片保存路径
    quartz定时任务及时间设置
    笛子初学者吹什么曲子
  • 原文地址:https://www.cnblogs.com/hollyhock/p/10295983.html
Copyright © 2011-2022 走看看