kubeadm部署kubernetes v1.14.1高可用集群

高可用简介
kubernetes高可用部署参考：
https://kubernetes.io/docs/setup/independent/high-availability/
https://github.com/kubernetes-sigs/kubespray
https://github.com/wise2c-devops/breeze
https://github.com/cookeem/kubeadm-ha

拓扑选择
配置高可用（HA）Kubernetes集群，有以下两种可选的etcd拓扑：

集群master节点与etcd节点共存，etcd也运行在控制平面节点上
使用外部etcd节点，etcd节点与master在不同节点上运行
堆叠的etcd拓扑
堆叠HA集群是这样的拓扑，其中etcd提供的分布式数据存储集群与由kubeamd管理的运行master组件的集群节点堆叠部署。
每个master节点运行kube-apiserver，kube-scheduler和kube-controller-manager的一个实例。kube-apiserver使用负载平衡器暴露给工作节点。
每个master节点创建一个本地etcd成员，该etcd成员仅与本节点kube-apiserver通信。这同样适用于本地kube-controller-manager 和kube-scheduler实例。
该拓扑将master和etcd成员耦合在相同节点上。比设置具有外部etcd节点的集群更简单，并且更易于管理复制。
但是，堆叠集群存在耦合失败的风险。如果一个节点发生故障，则etcd成员和master实例都将丢失，并且冗余会受到影响。您可以通过添加更多master节点来降低此风险。
因此，您应该为HA群集运行至少三个堆叠的master节点。
这是kubeadm中的默认拓扑。使用kubeadm init和kubeadm join --experimental-control-plane命令时，在master节点上自动创建本地etcd成员。

外部etcd拓扑
具有外部etcd的HA集群是这样的拓扑，其中由etcd提供的分布式数据存储集群部署在运行master组件的节点形成的集群外部。
像堆叠ETCD拓扑结构，在外部ETCD拓扑中的每个master节点运行一个kube-apiserver，kube-scheduler和kube-controller-manager实例。并且kube-apiserver使用负载平衡器暴露给工作节点。但是，etcd成员在不同的主机上运行，每个etcd主机与kube-apiserver每个master节点进行通信。
此拓扑将master节点和etcd成员分离。因此，它提供了HA设置，其中丢失master实例或etcd成员具有较小的影响并且不像堆叠的HA拓扑那样影响集群冗余。
但是，此拓扑需要两倍于堆叠HA拓扑的主机数。具有此拓扑的HA群集至少需要三个用于master节点的主机和三个用于etcd节点的主机。

部署要求
使用kubeadm部署高可用性Kubernetes集群的两种不同方法：

使用堆叠master节点。这种方法需要较少的基础设施，etcd成员和master节点位于同一位置。
使用外部etcd集群。这种方法需要更多的基础设施， master节点和etcd成员是分开的。
在继续之前，您应该仔细考虑哪种方法最能满足您的应用程序和环境的需求。
部署要求

至少3个master节点
至少3个worker节点
所有节点网络全部互通（公共或私有网络）
所有机器都有sudo权限
从一个设备到系统中所有节点的SSH访问
所有节点安装kubeadm和kubelet，kubectl是可选的。
针对外部etcd集群，你需要为etcd成员额外提供3个节点
负载均衡
部署集群前首选需要为kube-apiserver创建负载均衡器。
注意：负载平衡器有许多中配置方式。可以根据你的集群要求选择不同的配置方案。在云环境中，您应将master节点作为负载平衡器TCP转发的后端。此负载平衡器将流量分配到其目标列表中的所有健康master节点。apiserver的运行状况检查是对kube-apiserver侦听的端口的TCP检查（默认值:6443）。
负载均衡器必须能够与apiserver端口上的所有master节点通信。它还必须允许其侦听端口上的传入流量。另外确保负载均衡器的地址始终与kubeadm的ControlPlaneEndpoint地址匹配。
haproxy/nignx+keepalived是其中可选的负载均衡方案，针对公有云环境可以直接使用运营商提供的负载均衡产品。
部署时首先将第一个master节点添加到负载均衡器并使用以下命令测试连接：

# nc -v LOAD_BALANCER_IP PORT
1
由于apiserver尚未运行，因此预计会出现连接拒绝错误。但是，超时意味着负载均衡器无法与master节点通信。如果发生超时，请重新配置负载平衡器以与master节点通信。将剩余的master节点添加到负载平衡器目标组。
第2章    部署集群
本次使用kubeadm部署kubernetes v1.14.1高可用集群，包含3个master节点和1个node节点，部署步骤以官方文档为基础，负载均衡部分采用haproxy+keepalived容器方式实现。所有组件版本以kubernetes v1.14.1为准，其他组件以当前最新版本为准。

基本配置
节点信息：

主机名    IP地址    角色    OS    CPU/MEM    磁盘    网卡
k8s-master01    192.168.92.10    master    CentOS7.6    2C2G    60G    x1
k8s-master02    192.168.92.11    master    CentOS7.6    2C2G    60G    x1
k8s-master03    192.168.92.12    master    CentOS7.6    2C2G    60G    x1
k8s-node01    192.168.92.13    node    CentOS7.6    2C2G    60G    x1
K8S VIP    192.168.92.30    –    –    –    -    -
以下操作在所有节点执行。

#配置主机名
hostnamectl set-hostname k8s-master01
hostnamectl set-hostname k8s-master02
hostnamectl set-hostname k8s-master03
hostnamectl set-hostname k8s-node01
#修改/etc/hosts
cat >> /etc/hosts << EOF
192.168.92.10 k8s-master01
192.168.92.11 k8s-master02
192.168.92.12 k8s-master03
192.168.92.13 k8s-node01
EOF

# 开启firewalld防火墙并允许所有流量
systemctl start firewalld && systemctl enable firewalld
firewall-cmd --set-default-zone=trusted
firewall-cmd --complete-reload
# 关闭selinux
sed -i 's/^SELINUX=enforcing$/SELINUX=disabled/' /etc/selinux/config && setenforce 0

#关闭swap
swapoff -a
yes | cp /etc/fstab /etc/fstab_bak
cat /etc/fstab_bak | grep -v swap > /etc/fstab

配置时间同步
使用chrony同步时间，centos7默认已安装，这里修改时钟源，所有节点与网络时钟源同步：

# 安装chrony：
yum install -y chrony
cp /etc/chrony.conf{,.bak}
# 注释默认ntp服务器
sed -i 's/^server/#&/' /etc/chrony.conf
# 指定上游公共 ntp 服务器
cat >> /etc/chrony.conf << EOF
server 0.asia.pool.ntp.org iburst
server 1.asia.pool.ntp.org iburst
server 2.asia.pool.ntp.org iburst
server 3.asia.pool.ntp.org iburst
EOF

# 设置时区
timedatectl set-timezone Asia/Shanghai
# 重启chronyd服务并设为开机启动：
systemctl enable chronyd && systemctl restart chronyd

#验证,查看当前时间以及存在带*的行
timedatectl && chronyc sources

加载IPVS模块

在所有的Kubernetes节点执行以下脚本（若内核大于4.19替换nf_conntrack_ipv4为nf_conntrack）:
cat > /etc/sysconfig/modules/ipvs.modules <<EOF
#!/bin/bash
modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh
modprobe -- nf_conntrack_ipv4
EOF
#执行脚本
chmod 755 /etc/sysconfig/modules/ipvs.modules && bash /etc/sysconfig/modules/ipvs.modules && lsmod | grep -e ip_vs -e nf_conntrack_ipv4
#安装相关管理工具
yum install ipset ipvsadm -y

配置内核参数

cat > /etc/sysctl.d/k8s.conf <<EOF
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_nonlocal_bind = 1
net.ipv4.ip_forward = 1
vm.swappiness=0
EOF
sysctl --system

安装docker
CRI安装参考：https://kubernetes.io/docs/setup/cri/
要在Pod中运行容器，Kubernetes使用容器运行时。以下是可选的容器运行时。

Docker
CRI-O
Containerd
Other CRI runtimes: frakti
Cgroup驱动程序简介
当systemd被选为Linux发行版的init系统时，init进程会生成并使用根控制组（cgroup）并充当cgroup管理器。Systemd与cgroup紧密集成，并将为每个进程分配cgroup。可以配置容器运行时和要使用的kubelet cgroupfs。cgroupfs与systemd一起使用意味着将有两个不同的cgroup管理器。
Control groups用于约束分配给进程的资源。单个cgroup管理器将简化正在分配的资源的视图，并且默认情况下将具有更可靠的可用和使用资源视图。
当我们有两个managers时，我们最终会得到两个这些资源的视图。我们已经看到了现场的情况，其中配置cgroupfs用于kubelet和Docker systemd 的节点以及在节点上运行的其余进程在资源压力下变得不稳定。
更改设置，使容器运行时和kubelet systemd用作cgroup驱动程序，从而使系统稳定。请注意native.cgroupdriver=systemd下面Docker设置中的选项。

安装并配置docker

以下操作在所有节点执行。

# 安装依赖软件包
yum install -y yum-utils device-mapper-persistent-data lvm2

# 添加Docker repository，这里改为国内阿里云yum源
yum-config-manager
  --add-repo
  http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo

# 安装docker-ce
yum update -y && yum install -y docker-ce

## 创建 /etc/docker 目录
mkdir /etc/docker

# 配置 daemon.
cat > /etc/docker/daemon.json <<EOF
{
  "exec-opts": ["native.cgroupdriver=systemd"],
  "log-driver": "json-file",
  "log-opts": {
    "max-size": "100m"
  },
  "storage-driver": "overlay2",
  "storage-opts": [
    "overlay2.override_kernel_check=true"
  ],
  "registry-mirrors": ["https://uyah70su.mirror.aliyuncs.com"]
}
EOF
#注意，由于国内拉取镜像较慢，配置文件最后追加了阿里云镜像加速配置。

mkdir -p /etc/systemd/system/docker.service.d

# 重启docker服务
systemctl daemon-reload && systemctl restart docker && systemctl enable docker
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
安装负载均衡
kubernetes master 节点运行如下组件：

kube-apiserver
kube-scheduler
kube-controller-manager
kube-scheduler 和 kube-controller-manager 可以以集群模式运行，通过 leader 选举产生一个工作进程，其它进程处于阻塞模式。
kube-apiserver可以运行多个实例，但对其它组件需要提供统一的访问地址，该地址需要高可用。本次部署使用 keepalived+haproxy 实现 kube-apiserver VIP 高可用和负载均衡。
haproxy+keepalived配置vip，实现了api唯一的访问地址和负载均衡。keepalived 提供 kube-apiserver 对外服务的 VIP。haproxy 监听 VIP，后端连接所有 kube-apiserver 实例，提供健康检查和负载均衡功能。
运行 keepalived 和 haproxy 的节点称为 LB 节点。由于 keepalived 是一主多备运行模式，故至少两个 LB 节点。
本次部署复用 master 节点的三台机器，在所有3个master节点部署haproxy和keepalived组件，以达到更高的可用性，haproxy 监听的端口(6444) 需要与 kube-apiserver的端口 6443 不同，避免冲突。
keepalived 在运行过程中周期检查本机的 haproxy 进程状态，如果检测到 haproxy 进程异常，则触发重新选主的过程，VIP 将飘移到新选出来的主节点，从而实现 VIP 的高可用。
所有组件（如 kubeclt、apiserver、controller-manager、scheduler 等）都通过 VIP +haproxy 监听的6444端口访问 kube-apiserver 服务。
负载均衡架构图如下：

运行HA容器
使用的容器镜像为睿云智合开源项目breeze相关镜像，具体使用方法请访问：
https://github.com/wise2c-devops
其他选择：haproxy镜像也可以使用dockerhub官方镜像，但keepalived未提供官方镜像，可自行构建或使用dockerhub他人已构建好的镜像，本次部署全部使用breeze提供的镜像。
在3个master节点以容器方式部署haproxy，容器暴露6444端口，负载均衡到后端3个apiserver的6443端口，3个节点haproxy配置文件相同。

以下操作在master01节点执行。
创建haproxy启动脚本
编辑start-haproxy.sh文件，修改Kubernetes Master节点IP地址为实际Kubernetes集群所使用的值（Master Port默认为6443不用修改）：

mkdir -p /data/lb
cat > /data/lb/start-haproxy.sh << "EOF"
#!/bin/bash
MasterIP1=192.168.92.10
MasterIP2=192.168.92.11
MasterIP3=192.168.92.12
MasterPort=6443

docker run -d --restart=always --name HAProxy-K8S -p 6444:6444
        -e MasterIP1=$MasterIP1
        -e MasterIP2=$MasterIP2
        -e MasterIP3=$MasterIP3
        -e MasterPort=$MasterPort
        wise2c/haproxy-k8s
EOF
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
创建keepalived启动脚本
编辑start-keepalived.sh文件，修改虚拟IP地址VIRTUAL_IP、虚拟网卡设备名INTERFACE、虚拟网卡的子网掩码NETMASK_BIT、路由标识符RID、虚拟路由标识符VRID的值为实际Kubernetes集群所使用的值。（CHECK_PORT的值6444一般不用修改，它是HAProxy的暴露端口，内部指向Kubernetes Master Server的6443端口）

cat > /data/lb/start-keepalived.sh << "EOF"
#!/bin/bash
VIRTUAL_IP=192.168.92.30
INTERFACE=ens33
NETMASK_BIT=24
CHECK_PORT=6444
RID=10
VRID=160
MCAST_GROUP=224.0.0.18

docker run -itd --restart=always --name=Keepalived-K8S
        --net=host --cap-add=NET_ADMIN
        -e VIRTUAL_IP=$VIRTUAL_IP
        -e INTERFACE=$INTERFACE
        -e CHECK_PORT=$CHECK_PORT
        -e RID=$RID
        -e VRID=$VRID
        -e NETMASK_BIT=$NETMASK_BIT
        -e MCAST_GROUP=$MCAST_GROUP
        wise2c/keepalived-k8s
EOF
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
复制启动脚本到其他2个master节点

[root@k8s-master02 ~]# mkdir -p /data/lb
[root@k8s-master03 ~]# mkdir -p /data/lb
[root@k8s-master01 ~]# scp start-haproxy.sh  start-keepalived.sh 192.168.92.11:/data/lb/
[root@k8s-master01 ~]# scp start-haproxy.sh  start-keepalived.sh 192.168.92.12:/data/lb/
1
2
3
4
分别在3个master节点运行脚本启动haproxy和keepalived容器：

sh /data/lb/start-haproxy.sh && sh /data/lb/start-keepalived.sh
1
验证HA状态
查看容器运行状态

[root@k8s-master01 ~]# docker ps
CONTAINER ID        IMAGE                                               COMMAND                  CREATED             STATUS              PORTS                    NAMES
c1d1901a7201        wise2c/haproxy-k8s                                  "/docker-entrypoint.…"   5 days ago          Up 3 hours          0.0.0.0:6444->6444/tcp   HAProxy-K8S
2f02a9fde0be        wise2c/keepalived-k8s                               "/usr/bin/keepalived…"   5 days ago          Up 3 hours                                   Keepalived-K8S
1
2
3
4
查看网卡绑定的vip 为192.168.92.30

[root@k8s-master01 ~]# ip a | grep ens33
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    inet 192.168.92.10/24 brd 192.168.92.255 scope global noprefixroute ens33
    inet 192.168.92.30/24 scope global secondary ens33
1
2
3
4
查看监听端口为6444

[root@k8s-master01 ~]# netstat -tnlp | grep 6444                       
tcp6       0      0 :::6444                 :::*                    LISTEN      11695/docker-proxy  
1
2
keepalived配置文件中配置了vrrp_script脚本，使用nc命令对haproxy监听的6444端口进行检测，如果检测失败即认定本机haproxy进程异常，将vip漂移到其他节点。
所以无论本机keepalived容器异常或haproxy容器异常都会导致vip漂移到其他节点，可以停掉vip所在节点任意容器进行测试。

[root@k8s-master01 ~]# docker stop HAProxy-K8S 
HAProxy-K8S

#可以看到vip漂移到k8s-master02节点
[root@k8s-master02 ~]# ip a | grep ens33
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    inet 192.168.92.11/24 brd 192.168.92.255 scope global noprefixroute ens33
    inet 192.168.92.30/24 scope global secondary ens33
1
2
3
4
5
6
7
8
也可以在本地执行该nc命令查看结果

[root@k8s-master02 ~]# yum install -y nc
[root@k8s-master02 ~]# nc -v -w 2 -z 127.0.0.1 6444 2>&1 | grep 'Connected to' | grep 6444
Ncat: Connected to 127.0.0.1:6444.
1
2
3
关于haproxy和keepalived配置文件可以在github源文件中参考Dockerfile，或使用docker exec -it xxx sh命令进入容器查看，容器中的具体路径：

/etc/keepalived/keepalived.conf
/usr/local/etc/haproxy/haproxy.cfg
负载均衡部分配置完成后即可开始部署kubernetes集群。

安装kubeadm
以下操作在所有节点执行。

#由于官方源国内无法访问，这里使用阿里云yum源进行替换：
cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF

#安装kubeadm、kubelet、kubectl,注意这里默认安装当前最新版本v1.14.1:
yum install -y kubeadm kubelet kubectl
systemctl enable kubelet && systemctl start kubelet
1
2
3
4
5
6
7
8
9
10
11
12
13
14
初始化master节点
初始化参考：
https://kubernetes.io/docs/reference/setup-tools/kubeadm/kubeadm-init/
https://godoc.org/k8s.io/kubernetes/cmd/kubeadm/app/apis/kubeadm/v1beta1

创建初始化配置文件
可以使用如下命令生成初始化配置文件

kubeadm config print init-defaults > kubeadm-config.yaml
1
根据实际部署环境修改信息：

[root@k8s-master01 kubernetes]# vim kubeadm-config.yaml
apiVersion: kubeadm.k8s.io/v1beta1
bootstrapTokens:
- groups:
  - system:bootstrappers:kubeadm:default-node-token
  token: abcdef.0123456789abcdef
  ttl: 24h0m0s
  usages:
  - signing
  - authentication
kind: InitConfiguration
localAPIEndpoint:
  advertiseAddress: 192.168.92.10
  bindPort: 6443
nodeRegistration:
  criSocket: /var/run/dockershim.sock
  name: k8s-master01
  taints:
  - effect: NoSchedule
    key: node-role.kubernetes.io/master
---
apiServer:
  timeoutForControlPlane: 4m0s
apiVersion: kubeadm.k8s.io/v1beta1
certificatesDir: /etc/kubernetes/pki
clusterName: kubernetes
controlPlaneEndpoint: "192.168.92.30:6444"
controllerManager: {}
dns:
  type: CoreDNS
etcd:
  local:
    dataDir: /var/lib/etcd
imageRepository: registry.aliyuncs.com/google_containers
kind: ClusterConfiguration
kubernetesVersion: v1.14.1
networking:
  dnsDomain: cluster.local
  podSubnet: "10.244.0.0/16"
  serviceSubnet: 10.96.0.0/12
scheduler: {}

---
apiVersion: kubeproxy.config.k8s.io/v1alpha1
kind: KubeProxyConfiguration
featureGates:
  SupportIPVSProxyMode: true
mode: ipvs
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
配置说明：

controlPlaneEndpoint：为vip地址和haproxy监听端口6444
imageRepository:由于国内无法访问google镜像仓库k8s.gcr.io，这里指定为阿里云镜像仓库registry.aliyuncs.com/google_containers
podSubnet:指定的IP地址段与后续部署的网络插件相匹配，这里需要部署flannel插件，所以配置为10.244.0.0/16
mode: ipvs:最后追加的配置为开启ipvs模式。
在集群搭建完成后可以使用如下命令查看生效的配置文件：

kubectl -n kube-system get cm kubeadm-config -oyaml
1
初始化Master01节点

这里追加tee命令将初始化日志输出到kubeadm-init.log中以备用（可选）。

kubeadm init --config=kubeadm-config.yaml --experimental-upload-certs | tee kubeadm-init.log
1
该命令指定了初始化时需要使用的配置文件，其中添加–experimental-upload-certs参数可以在后续执行加入节点时自动分发证书文件。
初始化示例

[root@k8s-master01 ~]# kubeadm init --config=kubeadm-config.yaml --experimental-upload-certs | tee kubeadm-init.log
[init] Using Kubernetes version: v1.14.1
[preflight] Running pre-flight checks
        [WARNING Firewalld]: firewalld is active, please ensure ports [6443 10250] are open or your cluster may not function correctly
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Activating the kubelet service
[certs] Using certificateDir folder "/etc/kubernetes/pki"
[certs] Generating "front-proxy-ca" certificate and key
[certs] Generating "front-proxy-client" certificate and key
[certs] Generating "etcd/ca" certificate and key
[certs] Generating "etcd/server" certificate and key
[certs] etcd/server serving cert is signed for DNS names [k8s-master01 localhost] and IPs [192.168.92.10 127.0.0.1 ::1]
[certs] Generating "etcd/peer" certificate and key
[certs] etcd/peer serving cert is signed for DNS names [k8s-master01 localhost] and IPs [192.168.92.10 127.0.0.1 ::1]
[certs] Generating "apiserver-etcd-client" certificate and key
[certs] Generating "etcd/healthcheck-client" certificate and key
[certs] Generating "ca" certificate and key
[certs] Generating "apiserver-kubelet-client" certificate and key
[certs] Generating "apiserver" certificate and key
[certs] apiserver serving cert is signed for DNS names [k8s-master01 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 192.168.92.10 192.168.92.30]
[certs] Generating "sa" key and public key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
[endpoint] WARNING: port specified in controlPlaneEndpoint overrides bindPort in the controlplane address
[kubeconfig] Writing "admin.conf" kubeconfig file
[endpoint] WARNING: port specified in controlPlaneEndpoint overrides bindPort in the controlplane address
[kubeconfig] Writing "kubelet.conf" kubeconfig file
[endpoint] WARNING: port specified in controlPlaneEndpoint overrides bindPort in the controlplane address
[kubeconfig] Writing "controller-manager.conf" kubeconfig file
[endpoint] WARNING: port specified in controlPlaneEndpoint overrides bindPort in the controlplane address
[kubeconfig] Writing "scheduler.conf" kubeconfig file
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
[control-plane] Creating static Pod manifest for "kube-scheduler"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[apiclient] All control plane components are healthy after 19.020444 seconds
[upload-config] storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[kubelet] Creating a ConfigMap "kubelet-config-1.14" in namespace kube-system with the configuration for the kubelets in the cluster
[upload-certs] Storing the certificates in ConfigMap "kubeadm-certs" in the "kube-system" Namespace
[upload-certs] Using certificate key:
11def25d624a2150b57715e21b0c393695bc6a70d932e472f75d24f747eb657e
[mark-control-plane] Marking the node k8s-master01 as control-plane by adding the label "node-role.kubernetes.io/master=''"
[mark-control-plane] Marking the node k8s-master01 as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule]
[bootstrap-token] Using token: abcdef.0123456789abcdef
[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstrap-token] creating the "cluster-info" ConfigMap in the "kube-public" namespace
[addons] Applied essential addon: CoreDNS
[endpoint] WARNING: port specified in controlPlaneEndpoint overrides bindPort in the controlplane address
[addons] Applied essential addon: kube-proxy

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

You can now join any number of the control-plane node running the following command on each as root:

  kubeadm join 192.168.92.30:6444 --token abcdef.0123456789abcdef
    --discovery-token-ca-cert-hash sha256:7b232b343577bd5fac312996b9fffb3c88f8f8bb39f46bf865ac9f9f52982b82
    --experimental-control-plane --certificate-key 11def25d624a2150b57715e21b0c393695bc6a70d932e472f75d24f747eb657e

Please note that the certificate-key gives access to cluster sensitive data, keep it secret!
As a safeguard, uploaded-certs will be deleted in two hours; If necessary, you can use 
"kubeadm init phase upload-certs --experimental-upload-certs" to reload certs afterward.

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 192.168.92.30:6444 --token abcdef.0123456789abcdef
    --discovery-token-ca-cert-hash sha256:7b232b343577bd5fac312996b9fffb3c88f8f8bb39f46bf865ac9f9f52982b82

kubeadm init主要执行了以下操作：

[init]：指定版本进行初始化操作
[preflight] ：初始化前的检查和下载所需要的Docker镜像文件
[kubelet-start]：生成kubelet的配置文件”/var/lib/kubelet/config.yaml”，没有这个文件kubelet无法启动，所以初始化之前的kubelet实际上启动失败。
[certificates]：生成Kubernetes使用的证书，存放在/etc/kubernetes/pki目录中。
[kubeconfig] ：生成 KubeConfig 文件，存放在/etc/kubernetes目录中，组件之间通信需要使用对应文件。
[control-plane]：使用/etc/kubernetes/manifest目录下的YAML文件，安装 Master 组件。
[etcd]：使用/etc/kubernetes/manifest/etcd.yaml安装Etcd服务。
[wait-control-plane]：等待control-plan部署的Master组件启动。
[apiclient]：检查Master组件服务状态。
[uploadconfig]：更新配置
[kubelet]：使用configMap配置kubelet。
[patchnode]：更新CNI信息到Node上，通过注释的方式记录。
[mark-control-plane]：为当前节点打标签，打了角色Master，和不可调度标签，这样默认就不会使用Master节点来运行Pod。
[bootstrap-token]：生成token记录下来，后边使用kubeadm join往集群中添加节点时会用到
[addons]：安装附加组件CoreDNS和kube-proxy
说明：无论是初始化失败或者集群已经完全搭建成功，你都可以直接执行kubeadm reset命令清理集群或节点，然后重新执行kubeadm init或kubeadm join相关操作即可。

配置kubectl命令
无论在master节点或node节点，要能够执行kubectl命令必须进行以下配置：
root用户执行以下命令

cat << EOF >> ~/.bashrc
export KUBECONFIG=/etc/kubernetes/admin.conf
EOF
source ~/.bashrc

普通用户执行以下命令（参考init时的输出结果）

mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config

等集群配置完成后，可以在所有master节点和node节点进行以上配置，以支持kubectl命令。针对node节点复制任意master节点/etc/kubernetes/admin.conf到本地。
查看当前状态

[root@k8s-master01 ~]# kubectl get nodes             
NAME           STATUS     ROLES    AGE   VERSION
k8s-master01   NotReady   master   81s   v1.14.1
[root@k8s-master01 ~]# kubectl -n kube-system get pod
NAME                                   READY   STATUS    RESTARTS   AGE
coredns-8686dcc4fd-cbrc5               0/1     Pending   0          64s
coredns-8686dcc4fd-wqpwr               0/1     Pending   0          64s
etcd-k8s-master01                      1/1     Running   0          16s
kube-apiserver-k8s-master01            1/1     Running   0          13s
kube-controller-manager-k8s-master01   1/1     Running   0          25s
kube-proxy-4vwbb                       1/1     Running   0          65s
kube-scheduler-k8s-master01            1/1     Running   0          4s
[root@k8s-master01 ~]# kubectl get cs
NAME                 STATUS    MESSAGE             ERROR
scheduler            Healthy   ok                  
controller-manager   Healthy   ok                  
etcd-0               Healthy   {"health":"true"}   

由于未安装网络插件，coredns处于pending状态，node处于notready状态。

安装网络插件
kubernetes支持多种网络方案，这里简单介绍常用的flannel和calico安装方法，选择其中一种方案进行部署即可。

以下操作在master01节点执行即可。
安装flannel网络插件：
由于kube-flannel.yml文件指定的镜像从coreos镜像仓库拉取，可能拉取失败，可以从dockerhub搜索相关镜像进行替换，另外可以看到yml文件中定义的网段地址段为10.244.0.0/16。

wget https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
cat kube-flannel.yml | grep image
cat kube-flannel.yml | grep 10.244
sed -i 's#quay.io/coreos/flannel:v0.11.0-amd64#willdockerhub/flannel:v0.11.0-amd64#g' kube-flannel.yml
kubectl apply -f kube-flannel.yml

再次查看node和 Pod状态，全部为Running

[root@k8s-master01 ~]# kubectl get nodes
NAME           STATUS   ROLES    AGE    VERSION
k8s-master01   Ready    master   9m8s   v1.14.1
[root@k8s-master01 ~]# kubectl -n kube-system get pod
NAME                                   READY   STATUS    RESTARTS   AGE
coredns-8686dcc4fd-cbrc5               1/1     Running   0          8m53s
coredns-8686dcc4fd-wqpwr               1/1     Running   0          8m53s
etcd-k8s-master01                      1/1     Running   0          8m5s
kube-apiserver-k8s-master01            1/1     Running   0          8m2s
kube-controller-manager-k8s-master01   1/1     Running   0          8m14s
kube-flannel-ds-amd64-vtppf            1/1     Running   0          115s
kube-proxy-4vwbb                       1/1     Running   0          8m54s
kube-scheduler-k8s-master01            1/1     Running   0          7m53s

安装calico网络插件（可选）：
安装参考：https://docs.projectcalico.org/v3.6/getting-started/kubernetes/

kubectl apply -f
https://docs.projectcalico.org/v3.6/getting-started/kubernetes/installation/hosted/kubernetes-datastore/calico-networking/1.7/calico.yaml

注意该yaml文件中默认CIDR为192.168.0.0/16，需要与初始化时kube-config.yaml中的配置一致，如果不同请下载该yaml修改后运行。

加入master节点
从初始化输出或kubeadm-init.log中获取命令

kubeadm join 192.168.92.30:6444 --token abcdef.0123456789abcdef
    --discovery-token-ca-cert-hash sha256:c0a1021e5d63f509a0153724270985cdc22e46dc76e8e7b84d1fbb5e83566ea8
    --experimental-control-plane --certificate-key 52f64a834454c3043fe7a0940f928611b6970205459fa19cb1193b33a288e7cc

依次将k8s-master02和k8s-master03加入到集群中，示例

[root@k8s-master02 ~]#   kubeadm join 192.168.92.30:6444 --token abcdef.0123456789abcdef
>     --discovery-token-ca-cert-hash sha256:7b232b343577bd5fac312996b9fffb3c88f8f8bb39f46bf865ac9f9f52982b82
>     --experimental-control-plane --certificate-key 11def25d624a2150b57715e21b0c393695bc6a70d932e472f75d24f747eb657e
[preflight] Running pre-flight checks
[preflight] Reading configuration from the cluster...
[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -oyaml'
[preflight] Running pre-flight checks before initializing the new control plane instance
        [WARNING Firewalld]: firewalld is active, please ensure ports [6443 10250] are open or your cluster may not function correctly
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[download-certs] Downloading the certificates in Secret "kubeadm-certs" in the "kube-system" Namespace
[certs] Using certificateDir folder "/etc/kubernetes/pki"
[certs] Generating "etcd/healthcheck-client" certificate and key
[certs] Generating "etcd/server" certificate and key
[certs] etcd/server serving cert is signed for DNS names [k8s-master02 localhost] and IPs [192.168.92.11 127.0.0.1 ::1]
[certs] Generating "etcd/peer" certificate and key
[certs] etcd/peer serving cert is signed for DNS names [k8s-master02 localhost] and IPs [192.168.92.11 127.0.0.1 ::1]
[certs] Generating "apiserver-etcd-client" certificate and key
[certs] Generating "front-proxy-client" certificate and key
[certs] Generating "apiserver" certificate and key
[certs] apiserver serving cert is signed for DNS names [k8s-master02 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 192.168.92.11 192.168.92.30]
[certs] Generating "apiserver-kubelet-client" certificate and key
[certs] Valid certificates and keys now exist in "/etc/kubernetes/pki"
[certs] Using the existing "sa" key
[kubeconfig] Generating kubeconfig files
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
[endpoint] WARNING: port specified in controlPlaneEndpoint overrides bindPort in the controlplane address
[kubeconfig] Writing "admin.conf" kubeconfig file
[kubeconfig] Writing "controller-manager.conf" kubeconfig file
[kubeconfig] Writing "scheduler.conf" kubeconfig file
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
[control-plane] Creating static Pod manifest for "kube-scheduler"
[check-etcd] Checking that the etcd cluster is healthy
[kubelet-start] Downloading configuration for the kubelet from the "kubelet-config-1.14" ConfigMap in the kube-system namespace
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Activating the kubelet service
[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...
[etcd] Announced new etcd member joining to the existing etcd cluster
[etcd] Wrote Static Pod manifest for a local etcd member to "/etc/kubernetes/manifests/etcd.yaml"
[etcd] Waiting for the new etcd member to join the cluster. This can take up to 40s
[upload-config] storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[mark-control-plane] Marking the node k8s-master02 as control-plane by adding the label "node-role.kubernetes.io/master=''"
[mark-control-plane] Marking the node k8s-master02 as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule]

This node has joined the cluster and a new control plane instance was created:

* Certificate signing request was sent to apiserver and approval was received.
* The Kubelet was informed of the new secure connection details.
* Control plane (master) label and taint were applied to the new node.
* The Kubernetes control plane instances scaled up.
* A new etcd member was added to the local/stacked etcd cluster.

To start administering your cluster from this node, you need to run the following as a regular user:

        mkdir -p $HOME/.kube
        sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
        sudo chown $(id -u):$(id -g) $HOME/.kube/config

Run 'kubectl get nodes' to see this node join the cluster.


加入node节点
从kubeadm-init.log中获取命令

kubeadm join 192.168.92.30:6444 --token abcdef.0123456789abcdef
    --discovery-token-ca-cert-hash sha256:c0a1021e5d63f509a0153724270985cdc22e46dc76e8e7b84d1fbb5e83566ea8

示例

[root@k8s-node01 ~]# kubeadm join 192.168.92.30:6444 --token abcdef.0123456789abcdef
>     --discovery-token-ca-cert-hash sha256:7b232b343577bd5fac312996b9fffb3c88f8f8bb39f46bf865ac9f9f52982b82 
[preflight] Running pre-flight checks
[preflight] Reading configuration from the cluster...
[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -oyaml'
[kubelet-start] Downloading configuration for the kubelet from the "kubelet-config-1.14" ConfigMap in the kube-system namespace
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Activating the kubelet service
[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...

This node has joined the cluster:
* Certificate signing request was sent to apiserver and a response was received.
* The Kubelet was informed of the new secure connection details.

Run 'kubectl get nodes' on the control-plane to see this node join the cluster.

验证集群状态
查看nodes运行情况

[root@k8s-master01 ~]# kubectl get nodes -o wide     
NAME           STATUS   ROLES    AGE   VERSION   INTERNAL-IP     EXTERNAL-IP   OS-IMAGE                KERNEL-VERSION               CONTAINER-RUNTIME
k8s-master01   Ready    master   10h   v1.14.1   192.168.92.10   <none>        CentOS Linux 7 (Core)   3.10.0-957.10.1.el7.x86_64   docker://18.9.5
k8s-master02   Ready    master   10h   v1.14.1   192.168.92.11   <none>        CentOS Linux 7 (Core)   3.10.0-957.10.1.el7.x86_64   docker://18.9.5
k8s-master03   Ready    master   10h   v1.14.1   192.168.92.12   <none>        CentOS Linux 7 (Core)   3.10.0-957.10.1.el7.x86_64   docker://18.9.5
k8s-node01     Ready    <none>   10h   v1.14.1   192.168.92.13   <none>        CentOS Linux 7 (Core)   3.10.0-957.10.1.el7.x86_64   docker://18.9.5

查看pod运行情况

[root@k8s-master03 ~]# kubectl -n kube-system get pod -o wide
NAME                                    READY   STATUS    RESTARTS   AGE     IP              NODE           NOMINATED NODE   READINESS GATES
coredns-8686dcc4fd-6ttgv                1/1     Running   1          22m     10.244.2.3      k8s-master03   <none>           <none>
coredns-8686dcc4fd-dzvsx                1/1     Running   0          22m     10.244.3.3      k8s-node01     <none>           <none>
etcd-k8s-master01                       1/1     Running   1          6m23s   192.168.92.10   k8s-master01   <none>           <none>
etcd-k8s-master02                       1/1     Running   0          37m     192.168.92.11   k8s-master02   <none>           <none>
etcd-k8s-master03                       1/1     Running   1          36m     192.168.92.12   k8s-master03   <none>           <none>
kube-apiserver-k8s-master01             1/1     Running   1          48m     192.168.92.10   k8s-master01   <none>           <none>
kube-apiserver-k8s-master02             1/1     Running   0          37m     192.168.92.11   k8s-master02   <none>           <none>
kube-apiserver-k8s-master03             1/1     Running   2          36m     192.168.92.12   k8s-master03   <none>           <none>
kube-controller-manager-k8s-master01    1/1     Running   2          48m     192.168.92.10   k8s-master01   <none>           <none>
kube-controller-manager-k8s-master02    1/1     Running   1          37m     192.168.92.11   k8s-master02   <none>           <none>
kube-controller-manager-k8s-master03    1/1     Running   1          35m     192.168.92.12   k8s-master03   <none>           <none>
kube-flannel-ds-amd64-d86ct             1/1     Running   0          37m     192.168.92.11   k8s-master02   <none>           <none>
kube-flannel-ds-amd64-l8clz             1/1     Running   0          36m     192.168.92.13   k8s-node01     <none>           <none>
kube-flannel-ds-amd64-vtppf             1/1     Running   1          42m     192.168.92.10   k8s-master01   <none>           <none>
kube-flannel-ds-amd64-zg4z5             1/1     Running   1          37m     192.168.92.12   k8s-master03   <none>           <none>
kube-proxy-4vwbb                        1/1     Running   1          49m     192.168.92.10   k8s-master01   <none>           <none>
kube-proxy-gnk2v                        1/1     Running   0          37m     192.168.92.11   k8s-master02   <none>           <none>
kube-proxy-kqm87                        1/1     Running   0          36m     192.168.92.13   k8s-node01     <none>           <none>
kube-proxy-n5mdh                        1/1     Running   2          37m     192.168.92.12   k8s-master03   <none>           <none>
kube-scheduler-k8s-master01             1/1     Running   2          48m     192.168.92.10   k8s-master01   <none>           <none>
kube-scheduler-k8s-master02             1/1     Running   1          37m     192.168.92.11   k8s-master02   <none>           <none>
kube-scheduler-k8s-master03             1/1     Running   2          36m     192.168.92.12   k8s-master03   <none>           <none>

查看service

[root@k8s-master03 ~]# kubectl -n kube-system get svc
NAME                   TYPE        CLUSTER-IP      EXTERNAL-IP   PORT(S)                  AGE
kube-dns               ClusterIP   10.96.0.10      <none>        53/UDP,53/TCP,9153/TCP   51m

验证IPVS
查看kube-proxy日志，第一行输出Using ipvs Proxier.

[root@k8s-master01 ~]# kubectl -n kube-system logs -f kube-proxy-4vwbb 
I0426 16:05:03.156092       1 server_others.go:177] Using ipvs Proxier.
W0426 16:05:03.156501       1 proxier.go:381] IPVS scheduler not specified, use rr by default
I0426 16:05:03.156788       1 server.go:555] Version: v1.14.1
I0426 16:05:03.166269       1 conntrack.go:52] Setting nf_conntrack_max to 131072
I0426 16:05:03.169022       1 config.go:202] Starting service config controller
I0426 16:05:03.169103       1 controller_utils.go:1027] Waiting for caches to sync for service config controller
I0426 16:05:03.169182       1 config.go:102] Starting endpoints config controller
I0426 16:05:03.169200       1 controller_utils.go:1027] Waiting for caches to sync for endpoints config controller
I0426 16:05:03.269760       1 controller_utils.go:1034] Caches are synced for endpoints config controller
I0426 16:05:03.270123       1 controller_utils.go:1034] Caches are synced for service config controller
I0426 16:05:03.352400       1 graceful_termination.go:160] Trying to delete rs: 10.96.0.1:443/TCP/192.168.92.11:6443
I0426 16:05:03.352478       1 graceful_termination.go:174] Deleting rs: 10.96.0.1:443/TCP/192.168.92.11:6443
......

查看代理规则

[root@k8s-master01 ~]#  ipvsadm -ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  10.96.0.1:443 rr
  -> 192.168.92.10:6443           Masq    1      3          0         
  -> 192.168.92.11:6443           Masq    1      0          0         
  -> 192.168.92.12:6443           Masq    1      0          0         
TCP  10.96.0.10:53 rr
  -> 10.244.0.5:53                Masq    1      0          0         
  -> 10.244.0.6:53                Masq    1      0          0         
TCP  10.96.0.10:9153 rr
  -> 10.244.0.5:9153              Masq    1      0          0         
  -> 10.244.0.6:9153              Masq    1      0          0         
UDP  10.96.0.10:53 rr
  -> 10.244.0.5:53                Masq    1      0          0         
  -> 10.244.0.6:53                Masq    1      0          0       

etcd集群
执行以下命令查看etcd集群状态

kubectl -n kube-system exec etcd-k8s-master01 -- etcdctl
    --endpoints=https://192.168.92.10:2379
    --ca-file=/etc/kubernetes/pki/etcd/ca.crt
    --cert-file=/etc/kubernetes/pki/etcd/server.crt
    --key-file=/etc/kubernetes/pki/etcd/server.key cluster-health

示例

[root@k8s-master01 ~]# kubectl -n kube-system exec etcd-k8s-master01 -- etcdctl
> --endpoints=https://192.168.92.10:2379
> --ca-file=/etc/kubernetes/pki/etcd/ca.crt
> --cert-file=/etc/kubernetes/pki/etcd/server.crt
> --key-file=/etc/kubernetes/pki/etcd/server.key cluster-health
member a94c223ced298a9 is healthy: got healthy result from https://192.168.92.12:2379
member 1db71d0384327b96 is healthy: got healthy result from https://192.168.92.11:2379
member e86955402ac20700 is healthy: got healthy result from https://192.168.92.10:2379
cluster is healthy

验证HA
在master01上执行关机操作，建议提前在其他节点配置kubectl命令支持。

[root@k8s-master01 ~]# shutdown -h now
1
在任意运行节点验证集群状态，master01节点NotReady，集群可正常访问：

[root@k8s-master02 ~]# kubectl get nodes
NAME           STATUS     ROLES    AGE     VERSION
k8s-master01   NotReady   master   19m     v1.14.1
k8s-master02   Ready      master   11m     v1.14.1
k8s-master03   Ready      master   10m     v1.14.1
k8s-node01     Ready      <none>   9m21s   v1.14.1

查看网卡，vip自动漂移到master03节点

[root@k8s-master03 ~]# ip a |grep ens33
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    inet 192.168.92.12/24 brd 192.168.92.255 scope global noprefixroute ens33
    inet 192.168.92.30/24 scope global secondary ens33