RDA DEBUG

DEBUG寄存器：word 0xa0000010

　　word 0xa0000010 1　　//debug开

　　word 0xa0000010 0　　//debug关

当然也可以按模块打开/关闭debug信息，如 DBGCFG_KMF/DBGCFG_UMF/DBGCFG_MENU/DBGCFG_TUNER模块等。

所以大家在使用过程中要按源文件所在的模块加打印信息，这样的话，按模块开启或关闭打印信息较为方便。

如在“atv_app.c”中添加打印信息，应该使用“atv_printf()”而不是“printf()”，因为在“atv_app.c”中已经定义了如下关联：

#define atv_printf(fmt, arg...) UMFDBG(0,"[ATV App]" fmt, ##arg)

将“atv_printf”与“UMFDBG”进行了关联，我们设置“word 0xa0000010  0x400”可以单独控制此模块的debug。

不同模块设置的寄存器值是不一样的，如umf debug值为0x400，具体在文件“drv_debug.h”中定义。

#define DBGCONFIG1ADDR 0xa0000010
#define DBGCONFIG2ADDR 0xa0000014


// pdbgconf1 Flags
#define DBGCFG_VIP       (1 << MODULEID_VIP)   // 0x1
#define DBGCFG_MPEG      (1 << MODULEID_MPEG)  // 0x2
#define DBGCFG_CVD2      (1 << MODULEID_CVD2)  // 0x4
#define DBGCFG_ADC       (1 << MODULEID_ADC)   // 0x8

#define DBGCFG_HDMI      (1 << MODULEID_HDMI)   // 0x10
#define DBGCFG_AUDIO     (1 << MODULEID_AUDIO)  // 0x20
#define DBGCFG_BLT       (1 << MODULEID_BLT)    // 0x40   // not used. reserved.
#define DBGCFG_OSDLIB    (1 << MODULEID_OSDLIB) // 0x80   // not used. reserved.

#define DBGCFG_TUNER     (1 << MODULEID_TUNER)  // 0x100
#define DBGCFG_KMF       (1 << MODULEID_KMF)    // 0x200
#define DBGCFG_UMF       (1 << MODULEID_UMF)    // 0x400   
#define DBGCFG_MENU      (1 << MODULEID_MENU)   // 0x800    // not used. reserved.

#define DBGCFG_DEMUX     (1 << MODULEID_DEMUX)    // 0x1000   // not used. reserved.
#define DBGCFG_PSI       (1 << MODULEID_PSI)      // 0x2000
#define DBGCFG_EPG       (1 << MODULEID_EPG)      // 0x4000   // not used. reserved.
#define DBGCFG_SUBTITLE  (1 << MODULEID_SUBTITLE) // 0x8000   // not used. reserved.

#define DBGCFG_ATVCC     (1 << MODULEID_ATVCC)      // 0x10000
#define DBGCFG_DTVCC     (1 << MODULEID_DTVCC)      // 0x20000
#define DBGCFG_TTSLICER  (1 << MODULEID_TTSLICER)   // 0x40000
#define DBGCFG_TTDECODER (1 << MODULEID_TTDECORDER) // 0x80000

#define DBGCFG_JPEG      (1 << MODULEID_JPEG)   // 0x100000 // not used. reserved.
#define DBGCFG_USB       (1 << MODULEID_USB)    // 0x200000 // not used. reserved.
#define DBGCFG_IR        (1 << MODULEID_IR)     // 0x400000
#define DBGCFG_KEYPAD    (1 << MODULEID_KEYPAD) // 0x800000

#define DBGCFG_SPI       (1 << MODULEID_SPI)  // 0x1000000 
#define DBGCFG_I2C       (1 << MODULEID_I2C)  // 0x2000000
#define DBGCFG_EDID      (1 << MODULEID_EDID) // 0x4000000
#define DBGCFG_GPIO      (1 << MODULEID_GPIO) // 0x8000000

#define DBGCFG_LE        (1 << MODULEID_LE)   // 0x10000000 // not used. reserved.
#define DBGCFG_CEC       (1 << MODULEID_CEC)  // 0x20000000
#define DBGCFG_VBV       (1 << MODULEID_VBV)  // 0x40000000 // used for runav log.
#define DBGCFG_CI        (1 << MODULEID_CI)   // 0x80000000
//~ end of pdbgconf1 Flags


// pdbgconf2 Flags
#define DBGCFG_MP3                ( 1 << (MODULEID_MP3% 32) ) // 0x1                 // not used. reserved.
#define DBGCFG_CECSWITCH        ( 1 << (MODULEID_CECSWITCH % 32) ) // 0x2
#define DBGCFG_PVR                ( 1 << (MODULEID_PVR % 32) ) // 0x4
#define DBGCFG_DVBEUMIDDLEWARE    ( 1 << (MODULEID_DVBEUMIDDLEWARE % 32) ) // 0x4    // not used. reserved.

#define DBGCFG_HDMIOUT          ( 1 << (MODULEID_HDMIOUT % 32) ) // 0x10           // not used. reserved.
#define DBGCFG_FRAMEBUFFER      ( 1 << (MODULEID_FRAMEBUFFER % 32) ) // 0x20       // not used. reserved.
#define DBGCFG_2D                ( 1 << (MODULEID_2D % 32) ) // 0x40                // not used. reserved.
#define DBGCFG_SMP                ( 1 << (MODULEID_SMP % 32) ) // 0x80               // not used. reserved.

#define DBGCFG_ALSA             (1<<(MODULEID_ALSA%32)) // 0x100                   // not used. reserved.
#define DBGCFG_RUNAV            (1<<(MODULEID_RUNAV%32)) //0x1000                    //used for runav debug log.

#define DBGCFG_AUTOREBOOT    0x20000000  // not used. reserved.
#define DBGCFG_AUTORUN_USB    0x40000000  // not used. reserved.
#define DBGCFG_NOAUTORUN    0x80000000  // not used. reserved.