《DSP using MATLAB》Problem 3.18

代码：

%% ------------------------------------------------------------------------
%%            Output Info about this m-file
fprintf('
***********************************************************
');
fprintf('        <DSP using MATLAB> Problem 3.18 

');

banner();
%% ------------------------------------------------------------------------


%% -------------------------------------------------------------------
%%       y(n)=x(n)+x(n-2)+x(n-4)+x(n-6)
%%             -0.81y(n-2)-0.81*0.81y(n-4)-0.81^3*y(n-6) 
%% -------------------------------------------------------------------
a = [1, 0, 0.81, 0, 0.81^2, 0, 0.81^3];         % filter coefficient array a
b = [1, 0, 1, 0, 1, 0, 1];                      % filter coefficient array b

MM = 500;

[H, w] = freqresp1(b, a, MM);

magH  = abs(H);  angH  = angle(H);  realH  = real(H);  imagH  = imag(H);

%% --------------------------------------------------------------------
%%              START H's  mag ang real imag
%% --------------------------------------------------------------------
figure('NumberTitle', 'off', 'Name', 'Problem 3.18 H1');
set(gcf,'Color','white'); 
subplot(2,1,1); plot(w/pi,magH); grid on;  %axis([-1,1,0,1.05]); 
title('Magnitude Response');
xlabel('frequency in pi units'); ylabel('Magnitude  |H|'); 
subplot(2,1,2); plot(w/pi, angH/pi); grid on;  axis([-1,1,-1.05,1.05]);
title('Phase Response');
xlabel('frequency in pi units'); ylabel('Radians/pi');

figure('NumberTitle', 'off', 'Name', 'Problem 3.18 H1');
set(gcf,'Color','white'); 
subplot(2,1,1); plot(w/pi, realH); grid on;
title('Real Part');
xlabel('frequency in pi units'); ylabel('Real');
subplot(2,1,2); plot(w/pi, imagH); grid on;
title('Imaginary Part');
xlabel('frequency in pi units'); ylabel('Imaginary');
%% -------------------------------------------------------------------
%%             END X's  mag ang real imag
%% -------------------------------------------------------------------



%% --------------------------------------------------
%%             x1(n)=5+10*(-1)^n
%% --------------------------------------------------
 M = 200;
n1 = [0:M];
x1 = 5 + 10*(-1).^n1;

y1 = filter(b, a, x1);

figure('NumberTitle', 'off', 'Name', sprintf('Problem 3.18.1 M = %d',M));
set(gcf,'Color','white'); 
subplot(2,1,1);
stem(n1, x1); 
xlabel('n'); ylabel('x1');  
title(sprintf('x1(n) input sequence, M = %d', M)); grid on;
subplot(2,1,2); 
stem(n1, y1); 
xlabel('n'); ylabel('y1');  
title(sprintf('y1(n) output sequence, M = %d', M)); grid on;


%% --------------------------------------------------
%%             x2(n)=1+cos(0.5pin+pi/2)
%% --------------------------------------------------

n2 = n1;
x2 = 1 + cos(0.5*pi*n2+pi/2);

y2 = filter(b, a, x2);

figure('NumberTitle', 'off', 'Name', sprintf('Problem 3.18.2 M = %d',M));
set(gcf,'Color','white'); 
subplot(2,1,1);
stem(n2, x2); 
xlabel('n'); ylabel('x');  
title(sprintf('x2(n) input sequence, M = %d', M)); grid on;
subplot(2,1,2); 
stem(n2, y2); 
xlabel('n'); ylabel('y');  
title(sprintf('y2(n) output sequence, M = %d', M)); grid on;


%% --------------------------------------------------
%%             x3(n)=2sin(pin/4) + 3cos(3pin/4)
%% --------------------------------------------------

n3 = n1;
x3 = 2*sin(pi*n3/4) + 3*cos(3*pi*n3/2);

y3 = filter(b, a, x3);

figure('NumberTitle', 'off', 'Name', sprintf('Problem 3.18.3 M = %d',M));
set(gcf,'Color','white'); 
subplot(2,1,1);
stem(n3, x3); 
xlabel('n'); ylabel('x');  
title(sprintf('x3(n) input sequence, M = %d', M)); grid on;
subplot(2,1,2); 
stem(n3, y3); 
xlabel('n'); ylabel('y');  
title(sprintf('y3(n) output sequence, M = %d', M)); grid on;


%% ------------------------------------------------------------------------------
%%     x4(n)=1+2cos(pin/4)+3cos(2pin/4)+4cos(3pin/4)+5cos(4pin/4)+6cos(5pin/4)
%% ------------------------------------------------------------------------------
 
 n4 = n1;
sum = 0;
for i = 0:5
	sum = sum + (i+1)*cos(i*pi*n4/4);
end
x4 = sum;

y4 = filter(b, a, x4);

figure('NumberTitle', 'off', 'Name', sprintf('Problem 3.18.4 M = %d',M));
set(gcf,'Color','white'); 
subplot(2,1,1);
stem(n4, x4); 
xlabel('n'); ylabel('x');  
title(sprintf('x4(n) input sequence, M = %d', M)); grid on;
subplot(2,1,2); 
stem(n4, y4); 
xlabel('n'); ylabel('y');  
title(sprintf('y4(n) output sequence, M = %d', M)); grid on;


%% -----------------------------------------------------------------
%%                    x5(n)=cos(pin)
%% -----------------------------------------------------------------
 
 n5 = n1;

x5 = cos(pi*n5);

y5 = filter(b, a, x5);

figure('NumberTitle', 'off', 'Name', sprintf('Problem 3.18.5 M = %d',M));
set(gcf,'Color','white'); 
subplot(2,1,1);
stem(n5, x5); 
xlabel('n'); ylabel('x');  
title(sprintf('x5(n) input sequence, M = %d', M)); grid on;
subplot(2,1,2); 
stem(n5, y5); 
xlabel('n'); ylabel('y');  
title(sprintf('y5(n) output sequence, M = %d', M)); grid on;


%% -----------------------------------------------------------------
%%                    x0(n)=Acos(w0n+theta)
%% -----------------------------------------------------------------
 A = 3;
w0 = 0.2*pi;
theta = 0;

n0 = n1;

x0 = A * cos(w0*n0+theta);

yss = filter(b, a, x0);
figure('NumberTitle', 'off', 'Name', sprintf('Problem 3.18.6 M = %d',M));
set(gcf,'Color','white'); 
subplot(2,1,1);
stem(n0, x0); 
xlabel('n'); ylabel('x');  
title(sprintf('x0(n) input sequence, M = %d', M)); grid on;
subplot(2,1,2); 
stem(n0, yss); 
xlabel('n'); ylabel('y');  
title(sprintf('yss(n) output sequence, M = %d', M)); grid on;

　　运行结果：

       1、LTI系统的频率响应

        第1小题：

        第2小题：

 

        第3小题：

        第4小题：

        第5小题：