zoukankan      html  css  js  c++  java
  • 如何更改VNX Storage Processsor和Control Station管理地址

    准备工作

    a) 列出VNX Storage Processsor和Control Station的新的IP地址清单。

    b) 用串口线连接CS0,并通过putty登陆。注:从Control Station的背面看,串口位于最右边。

     

    c) 登陆Putty,配置参数如下:

    • bits per second: 19200
    • data bits: 8
    • parity: None
    • stop bit: 1
    • flow control: None
    • Telnet terminal ID: ANSI

    d) 作为用户nasadmin登陆,进入根目录$ su root

    情景一:新的IP地址和原地址在不同网段 

    1. 用下列命令暂停SP的Proxy ARP。这时原IP地址将不再回应任何ARP请求,即原地址失效。恢复到出厂的管理地址128.221.252.200和128.221.252.201。

    # /nas/sbin/clariion_mgmt -stop

    # ping 128.221.252.200 [SPA]

    # ping 128.221.253.201 [SPB]

    2. 更改CS0的IP地址,并验证:

    a) 更改CS0的IP地址,并验证:

    # nas_cs -set -ip4address 10.240.210.110 -ip4netmask 255.255.255.0 -ip4gateway 10.240.210.1

    OK

    # nas_cel -list

    id    name          owner mount_dev  channel    net_path            CMU

    0     c250          0                           10.240.210.110      FNM001046001132007

    # grep <cs0_name> /etc/hosts

    10.240.210.110   c250.emc.com       c250

    b)  等待5-15分钟,CS0的新IP地址将被更新到管理域domain中。

    # /nas/sbin/navicli -h 128.221.252.200 domain -list

    # /nas/sbin/navicli -h 128.221.253.201 domain -list

    注:在两个SP上最终的结果会显示CS0的新IP地址。

    c) 如果有必要,插拔管理端口的端口到另一台交换机。

    d) 如果只有单个Control Station,直接进入步骤5。如果有两个Control Station,继续下一步。

    3. 从CS0切换至CS1,修改CS1的IP地址并更新至管理域domain。

    a) 从CS0切换至CS1:

    # /nas/sbin/cs_standby -failover

    The system will reboot, do you wish to continue? [yes or no]: yes

    Failing over from Primary Control Station...

    b)  用串口线连接CS1,并通过putty登陆。确认CS1是当前的Primary control station。

    # /nas/sbin/getreason

    11 - slot_0 secondary control station

    10 - slot_1 primary control station   -->这里显示"Primary"

    5 - slot_2 contacted

    5 - slot_3 contacted

    # ps -ef |grep boxm

    # ps -ef |grep nas_m 

    c) 更改CS1的IP地址,并等待5-15分钟,确认CS0的新IP地址将被更新到管理域domain中。

    # nas_cs -set -ip4address 10.240.210.111 -ip4netmask 255.255.255.0 -ip4gateway 10.240.210.1

    OK

    # nas_cel -list

    # /nas/sbin/navicli -h 128.221.252.200 domain -list

    # /nas/sbin/navicli -h 128.221.253.201 domain -list

    # grep <cs1_name> /etc/hosts

    10.240.210.111   cs1_250.localdomain     cs1_250

    d)  如果有必要,插拔管理端口的端口到另一台交换机。

    4. 从CS1切换回CS0,等待CS0的IP地址再次更新至Domain。

    a)  从CS1切换回CS0。

    # /nas/sbin/cs_standby -failover

    The system will reboot, do you wish to continue? [yes or no]: yes

    Failing over from Primary Control Station...

    b) 用串口线连接CS0,并通过putty登陆。确认CS0当前是primary control station。

    # ps -ef |grep boxm

    # ps -ef |grep nas_m

    # /nas/sbin/getreason

    10 - slot_0 primary control station

    11 - slot_1 secondary control station

    c) 等待几分钟再次更新CS0 IP到domain中。

    # /nas/sbin/navicli -h 128.221.252.200 domain -list

    # /nas/sbin/navicli -h 128.221.253.201 domain –list

    5. 在SPA和SPB上启用Proxy ARP、配置新的IP地址并确认新地址生效,整个过程大概需要15分钟。

    # /nas/sbin/clariion_mgmt -start -spa_ip 10.240.210.112 -spb_ip 10.240.210.113

    # /nas/sbin/getreason

    # nas_storage -c -a

    # ping 10.240.210.112

    # ping 10.240.210.113

    # /nas/sbin/navicli -h 10.240.210.112 domain -list

    # /nas/sbin/navicli -h 10.240.210.113 domain –list

    6. 登陆Unisphere,确认IP地址是否修改成功。

    http://<SPA_IP_address>

    http://<SPB_IP_address>

    http://<CS0_IP_address>

    情景二:新的IP地址和原地址在同一网段

    1.     用下列命令更改两个SP的IP地址,确认新地址生效。

    # /nas/sbin/clariion_mgmt -modify -spa_ip 10.240.200.52 -spb_ip 10.240.200.53

    # ping 10.240.200.52

    # ping 10.240.200.53

    # tail /etc/hosts

    10.240.200.52 A_FNM00104600113 SPA # CLARiiON SP

    10.240.200.53 B_FNM00104600113 SPB # CLARiiON SP

    # nas_storage -c -a

    Discovering storage on c250 (may take several minutes)

    done

    # /nas/sbin/navicli -h 10.240.200.52 domain -list

    # /nas/sbin/navicli -h 10.240.200.53 domain –list

    2.      更改CS0的IP地址,并确认新地址更新至Domain中。

    # nas_cs -set -ip4address 10.240.200.50 -ip4netmask 255.255.255.0 -ip4gateway 10.240.200.1 

    OK

    # nas_cel -list

    id    name          owner mount_dev  channel    net_path          CMU

    0     c250          0                           10.240.200.50     FNM001046001132007

    # /nas/sbin/navicli -h 10.240.200.52 domain -list

    # /nas/sbin/navicli -h 10.240.200.53 domain -list

    # grep <cs0_name> /etc/hosts

    10.240.200.50  c250.emc.com      c250

    3.     对于有两个Control Station的VNX设备,需要从CS0切换至CS1,更改CS1的IP地址,等待CS1新地址更新至Domain。

    a)  从CS0切换至CS1

    # /nas/sbin/cs_standby -failover

    b) 登陆CS1,并确认CS1是当前的primary control station。

    # /nas/sbin/getreason

    11 - slot_0 secondary control station

    10 - slot_1 primary control station

    5 - slot_2 contacted

    5 - slot_3 contacted

    c) 更改CS1的IP地址,并确认新地址更新到Domain中。

    # nas_cs -set -ip4address 10.240.200.51 -ip4netmask 255.255.255.0 -ip4gateway 10.240.200.1

    OK

    # nas_cel -list

    # grep <cs1_name> /etc/hosts

    10.240.200.51   cs1_250.localdomain     cs1_250

    # /nas/sbin/navicli -h 10.240.200.52 domain -list

    # /nas/sbin/navicli -h 10.240.200.53 domain –list

    4. 从CS1切换回CS0,等待CS0的IP地址再次更新至Domain。

    a) 从CS1切换回CS0

    # /nas/sbin/cs_standby -failover

    b) 登陆CS0,并确认CS0是当前的primary control

    # /nas/sbin/getreason

    11 - slot_0 primary control station

    10 - slot_1 secondary control station

    5 - slot_2 contacted

    5 - slot_3 contacted

    c)  确认CS0地址更新至Domain

    # /nas/sbin/navicli -h 10.240.200.52 domain -list

    # /nas/sbin/navicli -h 10.240.200.53 domain -list

    5.  登陆Unisphere,确认IP地址是否修改成功。

    http://<SPA_IP_address>

    http://<SPB_IP_address>

    http://<CS0_IP_address>

    参考

    EMC知识库文章 emc279637 “Changing Control Station and SP IP addresses on 7.0.35.3 VNX Unified systems”

    应用于

    VNX系列

  • 相关阅读:
    产品经理经常犯的错误李可按
    skills_hive
    skills_office
    skills_idea
    skills_linux
    skills_ubuntu
    skills_git
    skills_redis
    skills_centos
    problems_hive
  • 原文地址:https://www.cnblogs.com/liulj0713/p/10418789.html
Copyright © 2011-2022 走看看