jmeter3.0生成html格式的dashboard性能测试结果

jmeter3.0以上支持生成dashboard的html报告，官网介绍：https://jmeter.apache.org/usermanual/generating-dashboard.html

效果图：

具体配置如下：

1. 打开jmeter安装目录下的user.properties，增加如下配置

#---------------------------------------------------------------------------
# Reporting configuration
#---------------------------------------------------------------------------
jmeter.save.saveservice.output_format=csv
jmeter.save.saveservice.bytes = true
jmeter.save.saveservice.label = true
jmeter.save.saveservice.latency = true
jmeter.save.saveservice.response_code = true
jmeter.save.saveservice.response_message = true
jmeter.save.saveservice.successful = true
jmeter.save.saveservice.thread_counts = true
jmeter.save.saveservice.thread_name = true
jmeter.save.saveservice.time = true
# the timestamp format must include the time and should include the date.
# For example the default, which is milliseconds since the epoch: 
jmeter.save.saveservice.timestamp_format = ms
# Or the following would also be suitable
jmeter.save.saveservice.timestamp_format = yyyy/MM/dd HH:mm:ss
jmeter.save.saveservice.assertion_results_failure_message = true

2. user.properties再增加如下内容

# Configure this property to change the report title
#jmeter.reportgenerator.report_title=Apache JMeter Dashboard

# Change this parameter if you want to change the granularity of over time graphs.
# Granularity must be higher than 1000 (1second) otherwise Throughput graphs will be incorrect
# see Bug 60149
#jmeter.reportgenerator.overall_granularity=60000

 Change this parameter if you want to change the granularity of Response time distribution
# Set to 500 ms by default
#jmeter.reportgenerator.graph.responseTimeDistribution.property.set_granularity=500

# Change this parameter if you want to override the APDEX satisfaction threshold.
jmeter.reportgenerator.apdex_satisfied_threshold=1500

# Change this parameter if you want to override the APDEX tolerance threshold.
jmeter.reportgenerator.apdex_tolerated_threshold=3000

# Sets the destination directory for generated html pages, it is better to change it for every generation
# This will override the value set through -o command line option
# jmeter.reportgenerator.exporter.html.property.output_dir=/tmp/test-report

# Indicates which graph series are filtered (regular expression)
# In the below example we filter on Search and Order samples
# Note that the end of the pattern should always include (-success|-failure)?$
# Transactions per second suffixes Transactions with "-success" or "-failure" depending 
# on the result
#jmeter.reportgenerator.exporter.html.series_filter=^(Search|Order)(-success|-failure)?$

# Indicates whether series filter apply only on sample series
jmeter.reportgenerator.exporter.html.filters_only_sample_series=true

3. 压力测试后生成报告的命令格式：

jmeter -n -t <test JMX file> -l <test log file> -e -o <Path to output folder>

例如：

jmeter -n -t D:work性能scrip	est1.jmx -l D:work性能scrip
p/testLogFile.jtl -e -o D:work性能scrip
p/output

4. 对已存在的日志文件生成报告的命令格式：

jmeter -g <log file> -o <Path to output folder>

例如：

jmeter -g D:work性能scrip
p/testLogFile.jtl -o D:work性能scrip
p/output

5. 到相应目录下查看，打开index.html，就可以看到response time 和tps等性能指标了