008 frame relay

Router>en

Router#config t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int s0/0/0

Router(config-if)#en

Router(config-if)#encapsulation f

Router(config-if)#encapsulation frame-relay

Router(config-if)#no frame-relay inverse-arp

Router(config-if)#frame-relay map ip 10.0.0.2 102 broadcast

Router(config-if)#no shut

 

%LINK-5-CHANGED: Interface Serial0/0/0, changed state to down

Router(config-if)#

Router(config)#int s0/0/1

Router(config-if)#no ip add

Router(config-if)#en

Router(config-if)#encapsulation f

Router(config-if)#encapsulation frame-relay

Router(config-if)#no frame-relay inverse-arp

Router(config-if)#no frame-relay inverse-arp

Router(config-if)#no shut

Router(config-subif)#int s0/0/1.1 point-to-point

Router(config-subif)#ip add 10.0.0.2 255.255.255.252

Router(config-subif)#fr

Router(config-subif)#frame-relay in

Router(config-subif)#frame-relay interface-dlci 201

Router(config-subif)#

 

Router#config t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int s0/0/1

Router(config-if)#no ip add

Router(config-if)#en

Router(config-if)#encapsulation f

Router(config-if)#encapsulation frame-relay

Router(config-if)#no frame-relay inverse-arp

Router(config-if)#no shut

Router(config-subif)#int s0/0/1.1 multipoint

Router(config-subif)#ip add 10.0.0.1 255.255.255.252

Router(config-subif)#fr

Router(config-subif)#frame-relay map ip 10.0.0.2 201 b

Router(config-subif)#frame-relay map ip 10.0.0.2 201 broadcast

Router(config-subif)#

来自为知笔记(Wiz)