Linux添加项目配置流程

一，在build/Kconfig中

　　1，在"Soling Project Select"中添加项目

config GLB_GMNCFG_SOLING_PRO_SLA70039A
            bool "enable_SLA70039A"

　　2，在"UI Resolution"中添加项目

config GLB_GMNCFG_ENABLE_800_480_UI
            depends on (GLB_GMNCFG_SOLING_PRO_P7014S1SC || GLB_GMNCFG_SOLING_PRO_SLA70039A || GLB_GMNCFG_SOLING_PRO_SLA70260)
            bool "800*480"

二，application/reference_td/pubtdLauncher/view/Makefile中配置编译的资源文件

ifeq ($(CONFIG_GLB_GMNCFG_SOLING_PRO_SLA70039A),y)
TD_RESOURCE_DIR := $(RESOURCE_DIR)/resources800
endif

三，application/reference_td/pubtdLauncher/sys_config.mk中添加项目的宏定义

ifeq ($(CONFIG_GLB_GMNCFG_SOLING_PRO_SLA70039A),y)
COMMON_FLAGS += -DCONFIG_SLA70039A
endif

四，在项目中使用三中定义的宏“CONFIG_SLA70039A”

#elif defined(CONFIG_SLA70039A)//XXXX800*480

    #define PAGE_MAX        (2)
    #define NEW_HOME_STYLE1 //XXXX界面

五，在代码中使用的“NEW_HOME_STYLE1 ”

    /*读取配置文件config.ini*/
    #ifdef NEW_HOME_STYLE1
    TwStyleSwitchTheme("theme_home1");
    TwLayoutParseFile(getRootTWiget(),TGetExecutePath("../etc/homeview1/home_layout1.ini"));

六，修改默认编译项目配置

build/platform_cfg/pub_cfg/defconfig

CONFIG_GLB_GMNCFG_SOLING_PRO_SLA70260=y
 # CONFIG_GLB_GMNCFG_SOLING_PRO_SLA70039B is not set
 # CONFIG_GLB_GMNCFG_SOLING_PRO_SUNPLUS_BOARD is not set

七，修改触摸参数

linux/kernel/drivers/input/touchscreen/gemini/c-gt9xx/tp_parameter.h

 #if (CONFIG_GLB_GMNCFG_SOLING_PRO_P7014S1SC 
-    || CONFIG_GLB_GMNCFG_SOLING_PRO_SLA70039A)
+    || CONFIG_GLB_GMNCFG_SOLING_PRO_SLA70039A 
+       || CONFIG_GLB_GMNCFG_SOLING_PRO_SLA70260)
 
     .pixel_x    = 800,
     .pixel_y    = 480,
@@ -133,6 +134,11 @@ struct ts_panel tp_config = {
     .r_x = 800,
     .up_y = 0,
     .down_y = 480,
+#elif (CONFIG_GLB_GMNCFG_SOLING_PRO_SLA70260)
+       .l_x = 0,
+       .r_x = 800,
+       .up_y = 0,
+       .down_y = 480,
 #elif (CONFIG_GLB_GMNCFG_SOLING_PRO_SLA70039B)