linux wake on lan功能通过ethtool配置【转】

转自：https://blog.csdn.net/fanlilei/article/details/38042063

ethtool工具中的wol功能一直很迷惑。今天看了代码将其帮助中下面的参数说明下，如果有不懂wake on lan的请自己到

intel官网查下。

p|u|m|b|a|g|s|d

        if (wolopts & WAKE_PHY)//物理接口
            *p++ = 'p';
        if (wolopts & WAKE_UCAST)//单播
            *p++ = 'u';
        if (wolopts & WAKE_MCAST)//多播
            *p++ = 'm';
        if (wolopts & WAKE_BCAST)//广播
            *p++ = 'b';
        if (wolopts & WAKE_ARP)//arp包
            *p++ = 'a';
        if (wolopts & WAKE_MAGIC)//magic 包
            *p++ = 'g';
        if (wolopts & WAKE_MAGICSECURE)//magic 加密包
            *p++ = 's';

d很明显了是关闭。

ethtool.c: if (adapter->wol & E1000_WUFC_EX)
ethtool.c:  wol->wolopts |= WAKE_UCAST; u
ethtool.c: if (adapter->wol & E1000_WUFC_MC)
ethtool.c:  wol->wolopts |= WAKE_MCAST; m
ethtool.c: if (adapter->wol & E1000_WUFC_BC)
ethtool.c:  wol->wolopts |= WAKE_BCAST; b
ethtool.c: if (adapter->wol & E1000_WUFC_MAG)
ethtool.c:  wol->wolopts |= WAKE_MAGIC; g
ethtool.c: if (adapter->wol & E1000_WUFC_LNKC)
ethtool.c:  wol->wolopts |= WAKE_PHY;  p
ethtool.c: if (adapter->wol & E1000_WUFC_ARP)
ethtool.c:  wol->wolopts |= WAKE_ARP;  a
ethtool.c:static int e1000_set_wol(struct net_device *netdev,
ethtool.c:    struct ethtool_wolinfo *wol)
ethtool.c:     (wol->wolopts & ~(WAKE_UCAST | WAKE_MCAST | WAKE_BCAST |
ethtool.c: adapter->wol = 0;
ethtool.c: if (wol->wolopts & WAKE_UCAST)
ethtool.c:  adapter->wol |= E1000_WUFC_EX;
ethtool.c: if (wol->wolopts & WAKE_MCAST)
ethtool.c:  adapter->wol |= E1000_WUFC_MC;
ethtool.c: if (wol->wolopts & WAKE_BCAST)
ethtool.c:  adapter->wol |= E1000_WUFC_BC;
ethtool.c: if (wol->wolopts & WAKE_MAGIC)
ethtool.c:  adapter->wol |= E1000_WUFC_MAG;
ethtool.c: if (wol->wolopts & WAKE_PHY)
ethtool.c:  adapter->wol |= E1000_WUFC_LNKC;
ethtool.c: if (wol->wolopts & WAKE_ARP)
ethtool.c:  adapter->wol |= E1000_WUFC_ARP;
---------------------
作者：尖椒炒肉
来源：CSDN
原文：https://blog.csdn.net/fanlilei/article/details/38042063
版权声明：本文为博主原创文章，转载请附上博文链接！