CentOS 6.5挂载windows NTFS硬盘
1、安装ntfs-3g
用root权限去安装
下载ntfs-3g网址：
http://www.tuxera.com/community/ntfs-3g-download/
下载的tgz格式后解压，tar-zxvf filename.tgz -C欲解压到的目录
进入解压的目录，接着依次执行
#./configure
#make
#make install
这样就安装好了
=====================================================
Open Source: NTFS-3G
Usage
If there was no error during installation then the NTFS volume can be mounted in read-write mode for everybody as follows. Unmount the volume if it had already been mounted, replace /dev/sda1 and /mnt/windows, if needed.
mount -t ntfs-3g /dev/sda1 /mnt/windows
Please see the NTFS-3G Manual for more options and examples.
You can also make NTFS to be mounted during boot by adding the following line to the end of the /etc/fstab file:
/dev/sda1 /mnt/windows ntfs-3g defaults 0 0
http://www.tuxera.com/community/open-source-ntfs-3g/
http://www.tuxera.com/community/open-source-ntfs-3g/
=====================================================
CentOS 6.5 挂载windowns NTFS 移动硬盘
主要参考了centos挂载移动硬盘
需要安装第三方的插件ntfs-3g
1、安装编译器，否则不能成功编译。
yum install gcc
根据提示按Y安装完成
一般都带gcc
2、安装ntfs-3g
用root权限去安装
下载ntfs-3g网址：
http://www.tuxera.com/community/ntfs-3g-download/
下载的tgz格式后解压，tar-zxvf filename.tgz -C欲解压到的目录
进入解压的目录，接着依次执行
#./configure
#make
#make install
这样就安装好了
3、fdisk -l 或者cat /proc/partitions查看硬盘分区情况，下图是我的分区
4、挂载分区，下面我们把
/dev/sdc1分区挂载到/mnt/win1
/dev/sdc2分区挂载到/mnt/win2
/dev/sdc3分区挂载到/mnt/win3
进入/mnt目录，新建win1win2 win3 三个挂载目录
cd/mnt
mkdir win1 win2 win3
mount -t ntfs-3g /dev/sdc1 /mnt/win1#挂载
mount -t ntfs-3g /dev/sdc2 /mnt/win2
mount -t ntfs-3g /dev/sdc3/mnt/win3
分区挂载完成，现在可以进入/mnt目录下面查看对应的文件夹，即就是你移动硬盘的分区
如果想卸载，可以用下面的命令
umount /dev/sdc1 #卸载
umount /dev/sdc2
umount /dev/sdc3
http://blog.csdn.net/willinux20130812/article/details/20463061
====================【我的 /etc/fstab 文件内容】====================
:
#
# /etc/fstab
# Created by anaconda on Tue Jun 6 05:13:14 2017
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
/dev/mapper/cl-root / xfs defaults 0 0
UUID=2f6bd410-52b9-4d5f-886a-4433b3671c26 /boot xfs defaults 0 0
/dev/mapper/cl-swap swap swap defaults 0 0:
/dev/sda2 /mnt/cpan ntfs-3g defaults 0 0
/dev/sda3 /mnt/66gb ntfs-3g defaults 0 0
/dev/sda5 /home/cbx2012/cb810812 ntfs-3g default 0 0
/dev/sda6 /home/cbx2012/16GExt3 ext3 defaults 0 0
/home/cbx2012/cb810812/winXPDNC/DNGS_GHOST_XP_KSZJB.iso /home/cbx2012/CDROM iso9660 loop 0 0
====================【看下面CB的例子】====================
暂时挂载
mount -t ntfs-3g /dev/sda2 /home/cbx2012/cb810812 //ntfs 格式
mount /dev/sda6 /home/cbx2012/16GExt3 //Linux Ext3 格式，不用ntfs-3g
mount -o loop dell_GHOST_WIN8.1_X64.iso /home/cbx2012/CDROM //挂载光驱iso文件
永久开机自动挂载
/dev/sda2 /mnt/cpan ntfs-3g defaults 0 0
/dev/sda3 /mnt/66gb ntfs-3g defaults 0 0
/dev/sda4 /home/cbx2012/cb810812 ntfs-3g default 0 0
/dev/sda6 /home/cbx2012/16GExt3 ext3 defaults 0 0
/home/cbx2012/cb810812/winXPDNC/DNGS_GHOST_XP_KSZJB.iso /home/cbx2012/CDROM iso9660 loop 0 0
====================【centOS7开机挂载ntfs磁盘】====================
sudo mkdir WindowsC
[root@localhost cbx2012]# ntfs-3g /dev/sda2 /mnt/WindowsC
fdisk -l
[root@localhost cbx2012]# mount -t ntfs-3g /dev/sda2 /home/cbx2012/cb810812
mount -t ntfs-3g /dev/sda2 /home/cbx2012/cb810812
CentOS 7 下挂载NTFS文件系统并实行开机自动挂载
http://www.linuxidc.com/Linux/2014-11/109226.htm
===========================================
centOS7开机挂载ntfs磁盘及windows引导修复
http://www.th7.cn/system/win/201612/196914.shtml
百度搜索以下内容
/dev/sda1 /mnt/windows ntfs-3g defaults 0 0
/dev/sda1 /mnt/windowsC ntfs-3g defaults 0 0
/dev/sda5 /mnt/windowsD ntfs-3g defaults 0 0
/dev/sda6 /mnt/windowsE ntfs-3g defaults 0 0
/dev/sda7 /mnt/windowsF ntfs-3g defaults 0 0
ntfs-3g /dev/sda1 /mnt/windowsC -o locale=ar_SA.UTF-8
ntfs-3g /dev/sda5 /mnt/windowsD -o locale=ar_SA.UTF-8
ntfs-3g /dev/sda6 /mnt/windowsE -o locale=ar_SA.UTF-8
ntfs-3g /dev/sda7 /mnt/windowsF -o locale=ar_SA.UTF-8
====================【Linux下添加新硬盘,分区及挂载】====================
Linux下添加新硬盘,分区及挂载
挂载好新硬盘后输入fdisk -l命令看当前磁盘信息
mount /dev/sda6 /home/cbx2012/16GExt3
fstab
/dev/sda6 /home/cbx2012/16GExt3 ext3 defaults 0 0
http://blog.chinaunix.net/uid-25829053-id-3067619.html
===============================================
挂载ISO
mount -o loop dell_GHOST_WIN8.1_X64.iso /home/cbx2012/CDROM
[root@localhost DellWin8.1]# mount -o loop dell_GHOST_WIN8.1_X64.iso /home/cbx2012/CDROM
mount: /dev/loop0 写保护，将以只读方式挂载
[root@localhost DellWin8.1]#
查看挂载状态
df -h
CentOS 本地ISO 挂载并配置本地软件源
http://www.cnblogs.com/oftenlin/p/4325023.html
============================================
在linux下挂载ISO镜像文件
http://blog.csdn.net/hancunai0017/article/details/6995284
虚拟机+centOS挂载ISO步骤
http://blog.csdn.net/u010612373/article/details/52240447