zoukankan      html  css  js  c++  java
  • vlan间路由--三层交换机实现vlan间通信

    接上片

    三层交换机实现vlan间通信

     LSW1看成是三层交换机

    [core_sw]vlan batch 100 200
    [core_sw]interface GigabitEthernet 0/0/1
    [core_sw-GigabitEthernet0/0/1]port link-type trunk
    [core_sw-GigabitEthernet0/0/1]port trunk allow-pass vlan 100 200
    [core_sw]interface Vlanif 100 //进入vlanif模式,直接配置ip地址。当然该接口工作的前提是:有接口被划入了该接口vlan或者trunk链路允许了该vlan通过
    [core_sw-Vlanif100]ip address 192.168.1.254 24
    [core_sw]interface Vlanif 200    
    [core_sw-Vlanif200]ip address 192.168.2.254 24
    [core_sw]display port vlan active 
    T=TAG U=UNTAG
    ---------------------------------------------------------------------
    Port                Link Type    PVID    VLAN List
    ---------------------------------------------------------------------
    GE0/0/1             trunk        1       U: 1
    [core_sw]display interface brief                                         T: 100 200
    InUti/OutUti: input utility/output utility
    Interface                   PHY   Protocol InUti OutUti   inErrors  outErrors
    GigabitEthernet0/0/1        up    up          0%     0%          0          0
    GigabitEthernet0/0/2        down  down        0%     0%          0          0
    MEth0/0/1                   down  down        0%     0%          0          0
    NULL0                       up    up(s)       0%     0%          0          0
    Vlanif1                     up    down        --     --          0          0
    Vlanif100                   up    up          --     --          0          0
    Vlanif200                   up    up          --     --          0          0
    [core_sw]display ip routing-table 
    Route Flags: R - relay, D - download to fib
    ---------------------------------------------------------------------
    Routing Tables: Public
             Destinations : 6        Routes : 6        
    
    Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface
    
          127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
          127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0
        192.168.1.0/24  Direct  0    0           D   192.168.1.254   Vlanif100
      192.168.1.254/32  Direct  0    0           D   127.0.0.1       Vlanif100
        192.168.2.0/24  Direct  0    0           D   192.168.2.254   Vlanif200
      192.168.2.254/32  Direct  0    0           D   127.0.0.1       Vlanif200

    查看vlanif配置

    [core_sw]display interface Vlanif
    Vlanif1 current state : UP
    Line protocol current state : DOWN
    Description:
    Route Port,The Maximum Transmit Unit is 1500
    Internet protocol processing : disabled
    IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 4c1f-cc1d-698d
    Current system time: 2020-05-29 15:05:44-08:00
        Input bandwidth utilization  : --
        Output bandwidth utilization : --
    
    Vlanif100 current state : UP
    Line protocol current state : UP
    Last line protocol up time : 2020-05-29 14:56:00 UTC-08:00
    Description:
    Route Port,The Maximum Transmit Unit is 1500
    Internet Address is 192.168.1.254/24
    IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 4c1f-cc1d-698d
    Current system time: 2020-05-29 15:05:44-08:00
        Input bandwidth utilization  : --
        Output bandwidth utilization : --
    
    Vlanif200 current state : UP
    Line protocol current state : UP
    Last line protocol up time : 2020-05-29 14:56:00 UTC-08:00
    Description:
    Route Port,The Maximum Transmit Unit is 1500
    Internet Address is 192.168.2.254/24
    IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 4c1f-cc1d-698d
    Current system time: 2020-05-29 15:05:44-08:00
        Input bandwidth utilization  : --
        Output bandwidth utilization : --

    二层交换机LSW2配置

    [sw1]vlan batch 100 200
    [sw1]interface Eth0/0/1
    [sw1-Ethernet0/0/1]port link-type trunk//与三层交换机连接,配置trunk模式
    [sw1-Ethernet0/0/1]port trunk allow-pass vlan 100 200 //允许vlan 100,200通过
    [sw1]interface Eth0/0/2
    [sw1-Ethernet0/0/2]port link-type access
    [sw1-Ethernet0/0/2]port default vlan 100
    [sw1]interface Eth0/0/3
    [sw1-Ethernet0/0/3]port link-type access
    [sw1-Ethernet0/0/3]port default vlan 200
    [sw1]display port vlan active 
    T=TAG U=UNTAG
    ---------------------------------------------------------------------
    Port                Link Type    PVID    VLAN List
    ---------------------------------------------------------------------
    Eth0/0/1            trunk        1       U: 1
                                             T: 100 200
    Eth0/0/2            access       100     U: 100
    Eth0/0/3            access       200     U: 200
    Eth0/0/4            hybrid       1       U: 1

    Pc1配置,ping网关和pc2

     

     现网应用最多的方案是单臂路由(适合中小型企业网络)和VLANIF(适合于大中型企业网络)

  • 相关阅读:
    java方法的重载
    java映射一对一关系
    java中必须知道的常用类
    使用eclipse开发java web网页——字符集问题
    使用eclipse开发java web网页
    Tomcat如何配置环境变量
    Java循环中删除list中元素方法的总结
    虚拟机概念(1)
    (24)像素重映射
    (23)霍夫圆
  • 原文地址:https://www.cnblogs.com/yhq1314/p/13071060.html
Copyright © 2011-2022 走看看