UVM Primer

所有的行为都混在一个文件中

module top;

   typedef enum bit[2:0] {no_op  = 3'b000,
                          add_op = 3'b001, 
                          and_op = 3'b010,
                          xor_op = 3'b011,
                          mul_op = 3'b100,
                          rst_op = 3'b111} operation_t;
   byte         unsigned        A;
   byte         unsigned        B;
   bit          clk;
   bit          reset_n;
   wire [2:0]   op;
   bit          start;
   wire         done;
   wire [15:0]  result;
   operation_t  op_set;

   assign op = op_set;

   tinyalu DUT (.A, .B, .clk, .op, .reset_n, .start, .done, .result);


   //covergroup模块
   covergroup op_cov;

      coverpoint op_set {
         bins single_cycle[] = {[add_op : xor_op], rst_op,no_op};
         bins multi_cycle = {mul_op};

         bins opn_rst[] = ([add_op:no_op] => rst_op);
         bins rst_opn[] = (rst_op => [add_op:no_op]);

         bins sngl_mul[] = ([add_op:xor_op],no_op => mul_op);
         bins mul_sngl[] = (mul_op => [add_op:xor_op], no_op);

         bins twoops[] = ([add_op:no_op] [* 2]);
         bins manymult = (mul_op [* 3:5]);


      }

   endgroup

   covergroup zeros_or_ones_on_ops;

      all_ops : coverpoint op_set {
         ignore_bins null_ops = {rst_op, no_op};}

      a_leg: coverpoint A {
         bins zeros = {'h00};
         bins others= {['h01:'hFE]};
         bins ones  = {'hFF};
      }

      b_leg: coverpoint B {
         bins zeros = {'h00};
         bins others= {['h01:'hFE]};
         bins ones  = {'hFF};
      }

      op_00_FF:  cross a_leg, b_leg, all_ops {
         bins add_00 = binsof (all_ops) intersect {add_op} &&
                       (binsof (a_leg.zeros) || binsof (b_leg.zeros));

         bins add_FF = binsof (all_ops) intersect {add_op} &&
                       (binsof (a_leg.ones) || binsof (b_leg.ones));

         bins and_00 = binsof (all_ops) intersect {and_op} &&
                       (binsof (a_leg.zeros) || binsof (b_leg.zeros));

         bins and_FF = binsof (all_ops) intersect {and_op} &&
                       (binsof (a_leg.ones) || binsof (b_leg.ones));

         bins xor_00 = binsof (all_ops) intersect {xor_op} &&
                       (binsof (a_leg.zeros) || binsof (b_leg.zeros));

         bins xor_FF = binsof (all_ops) intersect {xor_op} &&
                       (binsof (a_leg.ones) || binsof (b_leg.ones));

         bins mul_00 = binsof (all_ops) intersect {mul_op} &&
                       (binsof (a_leg.zeros) || binsof (b_leg.zeros));

         bins mul_FF = binsof (all_ops) intersect {mul_op} &&
                       (binsof (a_leg.ones) || binsof (b_leg.ones));

         bins mul_max = binsof (all_ops) intersect {mul_op} &&
                        (binsof (a_leg.ones) && binsof (b_leg.ones));

         ignore_bins others_only =
                                  binsof(a_leg.others) && binsof(b_leg.others);

      }

   endgroup




   initial begin
      clk = 0;
      forever begin
         #10;
         clk = ~clk;
      end
   end
   
   op_cov oc;
   zeros_or_ones_on_ops c_00_FF;

   initial begin : coverage
   
      oc = new();
      c_00_FF = new();
   
      forever begin @(negedge clk);
         oc.sample();
         c_00_FF.sample();
      end
   end : coverage
   

   function operation_t get_op();
      bit [2:0] op_choice;
      op_choice = $random;
      case (op_choice)
        3'b000 : return no_op;
        3'b001 : return add_op;
        3'b010 : return and_op;
        3'b011 : return xor_op;
        3'b100 : return mul_op;
        3'b101 : return no_op;
        3'b110 : return rst_op;
        3'b111 : return rst_op;
      endcase // case (op_choice)
   endfunction : get_op

   function byte get_data();
      bit [1:0] zero_ones;
      zero_ones = $random;
      if (zero_ones == 2'b00)
        return 8'h00;
      else if (zero_ones == 2'b11)
        return 8'hFF;
      else
        return $random;
   endfunction : get_data

   //scoreboard自检
   //Scoreboard循环会用预期结果来检查TinyALU的结果。循环会监控done信号，每当done信号拉高，scoreboard根据TinyALU的输入预测其结果，并检查其是否正确
   always @(posedge done) begin : scoreboard
      shortint predicted_result;
      case (op_set)
        add_op: predicted_result = A + B;
        and_op: predicted_result = A & B;
        xor_op: predicted_result = A ^ B;
        mul_op: predicted_result = A * B;
      endcase // case (op_set)

      if ((op_set != no_op) && (op_set != rst_op))
        if (predicted_result != result)
          $error ("FAILED: A: %0h  B: %0h  op: %s result: %0h",
                  A, B, op_set.name(), result);

   end : scoreboard
   

   //tester模块
   
   initial begin : tester
      reset_n = 1'b0;
      @(negedge clk);
      @(negedge clk);
      reset_n = 1'b1;
      start = 1'b0;
      repeat (1000) begin
         @(negedge clk);
         op_set = get_op();
         A = get_data();
         B = get_data();
         start = 1'b1;
         case (op_set) // handle the start signal
           no_op: begin 
              @(posedge clk);
              start = 1'b0;
           end
           rst_op: begin 
              reset_n = 1'b0;
              start = 1'b0;
              @(negedge clk);
              reset_n = 1'b1;
           end
           default: begin 
              wait(done);
              start = 1'b0;
           end
         endcase // case (op_set)
      end
      $stop;
   end : tester
endmodule : top