zoukankan html css js c++ java

（二）catalina.bat

　　startup.bat在最后调用catalina.bat，并且传递了start参数，设置了CATALINA_HOME和CURRENT_DIR俩个临时环境变量。那么catalina.bat都做了什么？

  1 @echo off
  2 rem Licensed to the Apache Software Foundation (ASF) under one or more
  3 rem contributor license agreements.  See the NOTICE file distributed with
  4 rem this work for additional information regarding copyright ownership.
  5 rem The ASF licenses this file to You under the Apache License, Version 2.0
  6 rem (the "License"); you may not use this file except in compliance with
  7 rem the License.  You may obtain a copy of the License at
  8 rem
  9 rem     http://www.apache.org/licenses/LICENSE-2.0
 10 rem
 11 rem Unless required by applicable law or agreed to in writing, software
 12 rem distributed under the License is distributed on an "AS IS" BASIS,
 13 rem WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 14 rem See the License for the specific language governing permissions and
 15 rem limitations under the License.
 16 
 17 rem ---------------------------------------------------------------------------
 18 rem Start/Stop Script for the CATALINA Server
 19 rem
 20 rem Environment Variable Prerequisites
 21 rem
 22 rem   Do not set the variables in this script. Instead put them into a script
 23 rem   setenv.bat in CATALINA_BASE/bin to keep your customizations separate.
 24 rem
 25 rem   CATALINA_HOME   May point at your Catalina "build" directory.
 26 rem
 27 rem   CATALINA_BASE   (Optional) Base directory for resolving dynamic portions
 28 rem                   of a Catalina installation.  If not present, resolves to
 29 rem                   the same directory that CATALINA_HOME points to.
 30 rem
 31 rem   CATALINA_OPTS   (Optional) Java runtime options used when the "start",
 32 rem                   "run" or "debug" command is executed.
 33 rem                   Include here and not in JAVA_OPTS all options, that should
 34 rem                   only be used by Tomcat itself, not by the stop process,
 35 rem                   the version command etc.
 36 rem                   Examples are heap size, GC logging, JMX ports etc.
 37 rem
 38 rem   CATALINA_TMPDIR (Optional) Directory path location of temporary directory
 39 rem                   the JVM should use (java.io.tmpdir).  Defaults to
 40 rem                   %CATALINA_BASE%	emp.
 41 rem
 42 rem   JAVA_HOME       Must point at your Java Development Kit installation.
 43 rem                   Required to run the with the "debug" argument.
 44 rem
 45 rem   JRE_HOME        Must point at your Java Runtime installation.
 46 rem                   Defaults to JAVA_HOME if empty. If JRE_HOME and JAVA_HOME
 47 rem                   are both set, JRE_HOME is used.
 48 rem
 49 rem   JAVA_OPTS       (Optional) Java runtime options used when any command
 50 rem                   is executed.
 51 rem                   Include here and not in CATALINA_OPTS all options, that
 52 rem                   should be used by Tomcat and also by the stop process,
 53 rem                   the version command etc.
 54 rem                   Most options should go into CATALINA_OPTS.
 55 rem
 56 rem   JAVA_ENDORSED_DIRS (Optional) Lists of of semi-colon separated directories
 57 rem                   containing some jars in order to allow replacement of APIs
 58 rem                   created outside of the JCP (i.e. DOM and SAX from W3C).
 59 rem                   It can also be used to update the XML parser implementation.
 60 rem                   Defaults to $CATALINA_HOME/endorsed.
 61 rem
 62 rem   JPDA_TRANSPORT  (Optional) JPDA transport used when the "jpda start"
 63 rem                   command is executed. The default is "dt_socket".
 64 rem
 65 rem   JPDA_ADDRESS    (Optional) Java runtime options used when the "jpda start"
 66 rem                   command is executed. The default is 8000.
 67 rem
 68 rem   JPDA_SUSPEND    (Optional) Java runtime options used when the "jpda start"
 69 rem                   command is executed. Specifies whether JVM should suspend
 70 rem                   execution immediately after startup. Default is "n".
 71 rem
 72 rem   JPDA_OPTS       (Optional) Java runtime options used when the "jpda start"
 73 rem                   command is executed. If used, JPDA_TRANSPORT, JPDA_ADDRESS,
 74 rem                   and JPDA_SUSPEND are ignored. Thus, all required jpda
 75 rem                   options MUST be specified. The default is:
 76 rem
 77 rem                   -agentlib:jdwp=transport=%JPDA_TRANSPORT%,
 78 rem                       address=%JPDA_ADDRESS%,server=y,suspend=%JPDA_SUSPEND%
 79 rem
 80 rem   LOGGING_CONFIG  (Optional) Override Tomcat's logging config file
 81 rem                   Example (all one line)
 82 rem                   set LOGGING_CONFIG="-Djava.util.logging.config.file=%CATALINA_BASE%conflogging.properties"
 83 rem
 84 rem   LOGGING_MANAGER (Optional) Override Tomcat's logging manager
 85 rem                   Example (all one line)
 86 rem                   set LOGGING_MANAGER="-Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager"
 87 rem
 88 rem   TITLE           (Optional) Specify the title of Tomcat window. The default
 89 rem                   TITLE is Tomcat if it's not specified.
 90 rem                   Example (all one line)
 91 rem                   set TITLE=Tomcat.Cluster#1.Server#1 [%DATE% %TIME%]
 92 rem ---------------------------------------------------------------------------
 93 
 94 setlocal
 95 
 96 rem Suppress Terminate batch job on CTRL+C
 97 if not ""%1"" == ""run"" goto mainEntry
 98 if "%TEMP%" == "" goto mainEntry
 99 if exist "%TEMP%\%~nx0.run" goto mainEntry
100 echo Y>"%TEMP%\%~nx0.run"
101 if not exist "%TEMP%\%~nx0.run" goto mainEntry
102 echo Y>"%TEMP%\%~nx0.Y"
103 call "%~f0" %* <"%TEMP%\%~nx0.Y"
104 rem Use provided errorlevel
105 set RETVAL=%ERRORLEVEL%
106 del /Q "%TEMP%\%~nx0.Y" >NUL 2>&1
107 exit /B %RETVAL%
108 :mainEntry
109 del /Q "%TEMP%\%~nx0.run" >NUL 2>&1
110 
111 rem Guess CATALINA_HOME if not defined
112 set "CURRENT_DIR=%cd%"
113 if not "%CATALINA_HOME%" == "" goto gotHome
114 set "CATALINA_HOME=%CURRENT_DIR%"
115 if exist "%CATALINA_HOME%incatalina.bat" goto okHome
116 cd ..
117 set "CATALINA_HOME=%cd%"
118 cd "%CURRENT_DIR%"
119 :gotHome
120 
121 if exist "%CATALINA_HOME%incatalina.bat" goto okHome
122 echo The CATALINA_HOME environment variable is not defined correctly
123 echo This environment variable is needed to run this program
124 goto end
125 :okHome
126 
127 rem Copy CATALINA_BASE from CATALINA_HOME if not defined
128 if not "%CATALINA_BASE%" == "" goto gotBase
129 set "CATALINA_BASE=%CATALINA_HOME%"
130 :gotBase
131 
132 rem Ensure that any user defined CLASSPATH variables are not used on startup,
133 rem but allow them to be specified in setenv.bat, in rare case when it is needed.
134 set CLASSPATH=
135 
136 rem Get standard environment variables
137 if not exist "%CATALINA_BASE%insetenv.bat" goto checkSetenvHome
138 call "%CATALINA_BASE%insetenv.bat"
139 goto setenvDone
140 :checkSetenvHome
141 if exist "%CATALINA_HOME%insetenv.bat" call "%CATALINA_HOME%insetenv.bat"
142 :setenvDone
143 
144 rem Get standard Java environment variables
145 if exist "%CATALINA_HOME%insetclasspath.bat" goto okSetclasspath
146 echo Cannot find "%CATALINA_HOME%insetclasspath.bat"
147 echo This file is needed to run this program
148 goto end
149 :okSetclasspath
150 call "%CATALINA_HOME%insetclasspath.bat" %1
151 if errorlevel 1 goto end
152 
153 rem Add on extra jar file to CLASSPATH
154 rem Note that there are no quotes as we do not want to introduce random
155 rem quotes into the CLASSPATH
156 if "%CLASSPATH%" == "" goto emptyClasspath
157 set "CLASSPATH=%CLASSPATH%;"
158 :emptyClasspath
159 set "CLASSPATH=%CLASSPATH%%CATALINA_HOME%inootstrap.jar"
160 
161 if not "%CATALINA_TMPDIR%" == "" goto gotTmpdir
162 set "CATALINA_TMPDIR=%CATALINA_BASE%	emp"
163 :gotTmpdir
164 
165 rem Add tomcat-juli.jar to classpath
166 rem tomcat-juli.jar can be over-ridden per instance
167 if not exist "%CATALINA_BASE%in	omcat-juli.jar" goto juliClasspathHome
168 set "CLASSPATH=%CLASSPATH%;%CATALINA_BASE%in	omcat-juli.jar"
169 goto juliClasspathDone
170 :juliClasspathHome
171 set "CLASSPATH=%CLASSPATH%;%CATALINA_HOME%in	omcat-juli.jar"
172 :juliClasspathDone
173 
174 if not "%LOGGING_CONFIG%" == "" goto noJuliConfig
175 set LOGGING_CONFIG=-Dnop
176 if not exist "%CATALINA_BASE%conflogging.properties" goto noJuliConfig
177 set LOGGING_CONFIG=-Djava.util.logging.config.file="%CATALINA_BASE%conflogging.properties"
178 :noJuliConfig
179 set "JAVA_OPTS=%JAVA_OPTS% %LOGGING_CONFIG%"
180 
181 if not "%LOGGING_MANAGER%" == "" goto noJuliManager
182 set LOGGING_MANAGER=-Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager
183 :noJuliManager
184 set "JAVA_OPTS=%JAVA_OPTS% %LOGGING_MANAGER%"
185 
186 rem ----- Execute The Requested Command ---------------------------------------
187 
188 echo Using CATALINA_BASE:   "%CATALINA_BASE%"
189 echo Using CATALINA_HOME:   "%CATALINA_HOME%"
190 echo Using CATALINA_TMPDIR: "%CATALINA_TMPDIR%"
191 if ""%1"" == ""debug"" goto use_jdk
192 echo Using JRE_HOME:        "%JRE_HOME%"
193 goto java_dir_displayed
194 :use_jdk
195 echo Using JAVA_HOME:       "%JAVA_HOME%"
196 :java_dir_displayed
197 echo Using CLASSPATH:       "%CLASSPATH%"
198 
199 set _EXECJAVA=%_RUNJAVA%
200 set MAINCLASS=org.apache.catalina.startup.Bootstrap
201 set ACTION=start
202 set SECURITY_POLICY_FILE=
203 set DEBUG_OPTS=
204 set JPDA=
205 
206 if not ""%1"" == ""jpda"" goto noJpda
207 set JPDA=jpda
208 if not "%JPDA_TRANSPORT%" == "" goto gotJpdaTransport
209 set JPDA_TRANSPORT=dt_socket
210 :gotJpdaTransport
211 if not "%JPDA_ADDRESS%" == "" goto gotJpdaAddress
212 set JPDA_ADDRESS=8000
213 :gotJpdaAddress
214 if not "%JPDA_SUSPEND%" == "" goto gotJpdaSuspend
215 set JPDA_SUSPEND=n
216 :gotJpdaSuspend
217 if not "%JPDA_OPTS%" == "" goto gotJpdaOpts
218 set JPDA_OPTS=-agentlib:jdwp=transport=%JPDA_TRANSPORT%,address=%JPDA_ADDRESS%,server=y,suspend=%JPDA_SUSPEND%
219 :gotJpdaOpts
220 shift
221 :noJpda
222 
223 if ""%1"" == ""debug"" goto doDebug
224 if ""%1"" == ""run"" goto doRun
225 if ""%1"" == ""start"" goto doStart
226 if ""%1"" == ""stop"" goto doStop
227 if ""%1"" == ""configtest"" goto doConfigTest
228 if ""%1"" == ""version"" goto doVersion
229 
230 echo Usage:  catalina ( commands ... )
231 echo commands:
232 echo   debug             Start Catalina in a debugger
233 echo   debug -security   Debug Catalina with a security manager
234 echo   jpda start        Start Catalina under JPDA debugger
235 echo   run               Start Catalina in the current window
236 echo   run -security     Start in the current window with security manager
237 echo   start             Start Catalina in a separate window
238 echo   start -security   Start in a separate window with security manager
239 echo   stop              Stop Catalina
240 echo   configtest        Run a basic syntax check on server.xml
241 echo   version           What version of tomcat are you running?
242 goto end
243 
244 :doDebug
245 shift
246 set _EXECJAVA=%_RUNJDB%
247 set DEBUG_OPTS=-sourcepath "%CATALINA_HOME%....java"
248 if not ""%1"" == ""-security"" goto execCmd
249 shift
250 echo Using Security Manager
251 set "SECURITY_POLICY_FILE=%CATALINA_BASE%confcatalina.policy"
252 goto execCmd
253 
254 :doRun
255 shift
256 if not ""%1"" == ""-security"" goto execCmd
257 shift
258 echo Using Security Manager
259 set "SECURITY_POLICY_FILE=%CATALINA_BASE%confcatalina.policy"
260 goto execCmd
261 
262 :doStart
263 shift
264 if "%TITLE%" == "" set TITLE=Tomcat
265 set _EXECJAVA=start "%TITLE%" %_RUNJAVA%
266 if not ""%1"" == ""-security"" goto execCmd
267 shift
268 echo Using Security Manager
269 set "SECURITY_POLICY_FILE=%CATALINA_BASE%confcatalina.policy"
270 goto execCmd
271 
272 :doStop
273 shift
274 set ACTION=stop
275 set CATALINA_OPTS=
276 goto execCmd
277 
278 :doConfigTest
279 shift
280 set ACTION=configtest
281 set CATALINA_OPTS=
282 goto execCmd
283 
284 :doVersion
285 %_EXECJAVA% -classpath "%CATALINA_HOME%libcatalina.jar" org.apache.catalina.util.ServerInfo
286 goto end
287 
288 
289 :execCmd
290 rem Get remaining unshifted command line arguments and save them in the
291 set CMD_LINE_ARGS=
292 :setArgs
293 if ""%1""=="""" goto doneSetArgs
294 set CMD_LINE_ARGS=%CMD_LINE_ARGS% %1
295 shift
296 goto setArgs
297 :doneSetArgs
298 
299 rem Execute Java with the applicable properties
300 if not "%JPDA%" == "" goto doJpda
301 if not "%SECURITY_POLICY_FILE%" == "" goto doSecurity
302 %_EXECJAVA% %JAVA_OPTS% %CATALINA_OPTS% %DEBUG_OPTS% -Djava.endorsed.dirs="%JAVA_ENDORSED_DIRS%" -classpath "%CLASSPATH%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%
303 goto end
304 :doSecurity
305 %_EXECJAVA% %JAVA_OPTS% %CATALINA_OPTS% %DEBUG_OPTS% -Djava.endorsed.dirs="%JAVA_ENDORSED_DIRS%" -classpath "%CLASSPATH%" -Djava.security.manager -Djava.security.policy=="%SECURITY_POLICY_FILE%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%
306 goto end
307 :doJpda
308 if not "%SECURITY_POLICY_FILE%" == "" goto doSecurityJpda
309 %_EXECJAVA% %JAVA_OPTS% %JPDA_OPTS% %CATALINA_OPTS% %DEBUG_OPTS% -Djava.endorsed.dirs="%JAVA_ENDORSED_DIRS%" -classpath "%CLASSPATH%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%
310 goto end
311 :doSecurityJpda
312 %_EXECJAVA% %JAVA_OPTS% %JPDA_OPTS% %CATALINA_OPTS% %DEBUG_OPTS% -Djava.endorsed.dirs="%JAVA_ENDORSED_DIRS%" -classpath "%CLASSPATH%" -Djava.security.manager -Djava.security.policy=="%SECURITY_POLICY_FILE%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%
313 goto end
314 
315 :end

View Code

　　line 1　　@echo off　　关闭批处理输出

　　line 94　　setlocal　　开始设置临时环境变量

　　line 97　　if not ""%1"" == ""run"" goto mainEntry　　如果第一个参数不是run的话，goto mainEntry节点（第一个参数默认start，所以会直接goto mianEntry节点）；否则继续。

　　line 98-108　　如果第一个参数是run的话才会被执行，其中加黑的103，105，107并未理解。

　　line 98　　if "%TEMP%" == "" goto mainEntry　　如果没有TEMP环境变量的话，goto mianEntry节点；否则继续。我试了一下echo %TEMP%，得到的是*AppDataLocalTemp，所以这个和startup.bat中的%OS%一样是存在的，继续line99

　　line 99　　if exist "%TEMP%\%~nx0.run" goto mainEntry　　如果在%TEMP% 目录下有 %~nx0.run，goto mainEntry，但是%~nx0.run是什么呢？搜索了一下，%0就是本BAT的绝对路径，%~ 扩充删除任何引号，%~nx ::n文件名 ::x扩展名。试着写了个test.bat，内容是echo "%TEMP%\%~nx0.run"，执行结果：*AppDataLocalTemp est.bat.run，所以这一行是如果在%TEMP%下有catalina.bat.run，goto mainEntry节点，我查了下对应目录下并没有catalina.bat.run，继续line100。

　　line100　　echo Y>"%TEMP%\%~nx0.run"　　创建catalina.bat.run并写入Y。

　　line101　　if not exist "%TEMP%\%~nx0.run" goto mainEntry　　如果%TEMP%下仍没有catalina.bat.run，goto mainEntry，但line100创建并写入了Y，继续下一行。

　　line102　　echo Y>"%TEMP%\%~nx0.Y"　　创建catalina.bat.Y并写入Y。

　　line103　　call "%~f0" %* <"%TEMP%\%~nx0.Y"　　试了下echo "%~f0"，执行结果：*Desktop est.bat。%*是命令行传的所有参数，"%TEMP%\%~nx0.Y"是line102创建的文件内容为Y。所以line103做的事情就是catalina.bat自己调用自己，参数为Y。为什么呢？？？？

　　line105　　set RETVAL=%ERRORLEVEL%　　试了下echo %ERRORLEVEL%，执行结果：0，但是搜索了一下%ERRORLEVEL%是返回的错误码，0是成功，其他是失败。

　　line106　　del /Q "%TEMP%\%~nx0.Y" >NUL 2>&1　　del /Q是安静模式删除，不要求确认。NUL是DOS下的一个虚拟设备，相当于一个文件（输入时立即结束，输出时仅作模拟）。2>&1，2是值错误输出，&1是标准输出，意思就是将错误输出重定向到标准输出中。>NUL 2>&1，就是将错误输入重定向到标准输出，重定向到NUL中。这行作用就是安静模式删除*AppDataLocalTemp est.bat.Y。

　　DEL命令：

DEL [/P] [/F] [/S] [/Q] [/A[[:]attributes]] names
/P 删除每一个文件之前提示确认。 
/F 强制删除只读文件。 
/S 从所有子目录删除指定文件。 
/Q 安静模式。删除全局通配符时，不要求确认。 
/A 根据属性选择要删除的文件。

　　line107　　exit /B %RETVAL%　　，在cmd中输入了一下help exit，得到如下结果:

退出 CMD.EXE 程序(命令解释器)或当前批处理脚本。

EXIT [/B] [exitCode]

  /B          指定要退出当前批处理脚本而不是 CMD.EXE。如果从一个
              批处理脚本外执行，则会退出 CMD.EXE

  exitCode    指定一个数字号码。如果指定了 /B，将 ERRORLEVEL
              设成那个数字。如果退出 CMD.EXE，则用那个数字设置
              过程退出代码。

　　line108　　:mainEntry　　:mainEntry节点

　　line109　　del /Q "%TEMP%\%~nx0.run" >NUL 2>&1　　安静模式删除*AppDataLocalTemp est.bat.run。

　　为了搞明白103~107，我在catalina.bat中加入了几行输出，把catalina.bat.run的创建和删除注释掉了，如下：

 1 if not ""%1"" == ""run"" goto mainEntry
 2 if "%TEMP%" == "" goto mainEntry
 3 if exist "%TEMP%\%~nx0.run" goto mainEntry
 4 rem echo Y>"%TEMP%\%~nx0.run"
 5 rem if not exist "%TEMP%\%~nx0.run" goto mainEntry
 6 echo Y>"%TEMP%\%~nx0.Y"
 7 echo ======================================1
 8 call "%~f0" %* <"%TEMP%\%~nx0.Y"
 9 echo ======================================2
10 rem Use provided errorlevel
11 set RETVAL=%ERRORLEVEL%
12 echo ====================================="%ERRORLEVEL%"
13 echo ====================================="%RETVAL%
14 del /Q "%TEMP%\%~nx0.Y" >NUL 2>&1
15 exit /B %RETVAL%
16 :mainEntry
17 rem del /Q "%TEMP%\%~nx0.run" >NUL 2>&1

　　我直接启动catalina.bat run，用run做第一个参数，因为如果%TEMP%下没有catalina.bat.run的话会创建，然后我注释了line5，这样不会goto mainEntry节点，而是继续执行。line7会有输出，而后就没有了。line8 ，catalina.bat使用Y参数自己调用自己，然后走到line1，因为参数不是run而是Y，goto mainEntry节点。之后我将catalina.bat.Y修改为run试了下，会停留在line7一直输出=====1。那么line9~line15什么时候会执行呢？

我启动catalina.bat run，然后运行shutdown.bat，line9输出，%ERRORLEVEL%是0，catalina.bat.Y被删除，catalina.bat被停掉。简单扫了眼shutdown.bat，这个batch file 在最后call catalina.bat stop，即停掉了catalina.bat。

　　line111~125　　和startup.bat做的事情差不多，如果是从startup.bat启动的话，CURRENT_DIR和CATALINA_HOME俩个变量在startup里已经设置过，依然有效。

rem Guess CATALINA_HOME if not defined
set "CURRENT_DIR=%cd%"
if not "%CATALINA_HOME%" == "" goto gotHome
set "CATALINA_HOME=%CURRENT_DIR%"
if exist "%CATALINA_HOME%incatalina.bat" goto okHome
cd ..
set "CATALINA_HOME=%cd%"
cd "%CURRENT_DIR%"
:gotHome

if exist "%CATALINA_HOME%incatalina.bat" goto okHome
echo The CATALINA_HOME environment variable is not defined correctly
echo This environment variable is needed to run this program
goto end
:okHome

111~125

　　line127~130　　如果没有CATALINA_BASE这个环境变量的话，把CATALINA_HOME的值给它（CATALINA_HOME这个环境变量我都没有提前配置，CATALINA_BASE肯定也不会配置）。

rem Copy CATALINA_BASE from CATALINA_HOME if not defined
if not "%CATALINA_BASE%" == "" goto gotBase
set "CATALINA_BASE=%CATALINA_HOME%"
:gotBase

127~130

　　line132~134　　set CLASSPATH=　　设置CLASSPATH临时环境变量，注释为：Ensure that any user defined CLASSPATH variables are not used on startup, but allow them to be specified in setenv.bat, in rare case when it is needed. 大意是：确认在启动时不使用任何用户定义的CLASSPATH，但是在允许在setenv.bat里指定它们（CLASSPATH variables）。搜索了一下setenv.bat发现可以指定另外的JAVA_HOME和JAVA_OPTS等等环境变量。

　　line136~142　　如果用户在%CATALINA_HOME%in或者%CATALINA_BASE%in下建了setenv.bat就调用setenv.bat。

rem Get standard environment variables
if not exist "%CATALINA_BASE%insetenv.bat" goto checkSetenvHome
call "%CATALINA_BASE%insetenv.bat"
goto setenvDone
:checkSetenvHome
if exist "%CATALINA_HOME%insetenv.bat" call "%CATALINA_HOME%insetenv.bat"
:setenvDone

136~142

　　line144~151　　调用%CATALINA_HOME%insetclasspath.bat，获取java相关环境变量。

rem Get standard Java environment variables
if exist "%CATALINA_HOME%insetclasspath.bat" goto okSetclasspath
echo Cannot find "%CATALINA_HOME%insetclasspath.bat"
echo This file is needed to run this program
goto end
:okSetclasspath
call "%CATALINA_HOME%insetclasspath.bat" %1
if errorlevel 1 goto end

144~151

　　line145　　if exist "%CATALINA_HOME%insetclasspath.bat" goto okSetclasspath　　如果文件存在，goto okSetclasspath节点，否则执行line146~147后goto end节点退出本次批处理。

　　line150　　call "%CATALINA_HOME%insetclasspath.bat" %1　　调用%CATALINA_HOME%insetclasspath.bat，参数是catalina.bat的第一个参数（即从startup.bat拿到的start）。

 1 @echo off
 2 rem Licensed to the Apache Software Foundation (ASF) under one or more
 3 rem contributor license agreements.  See the NOTICE file distributed with
 4 rem this work for additional information regarding copyright ownership.
 5 rem The ASF licenses this file to You under the Apache License, Version 2.0
 6 rem (the "License"); you may not use this file except in compliance with
 7 rem the License.  You may obtain a copy of the License at
 8 rem
 9 rem     http://www.apache.org/licenses/LICENSE-2.0
10 rem
11 rem Unless required by applicable law or agreed to in writing, software
12 rem distributed under the License is distributed on an "AS IS" BASIS,
13 rem WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
14 rem See the License for the specific language governing permissions and
15 rem limitations under the License.
16 
17 rem ---------------------------------------------------------------------------
18 rem Set JAVA_HOME or JRE_HOME if not already set, ensure any provided settings
19 rem are valid and consistent with the selected start-up options and set up the
20 rem endorsed directory.
21 rem ---------------------------------------------------------------------------
22 
23 rem Make sure prerequisite environment variables are set
24 
25 rem In debug mode we need a real JDK (JAVA_HOME)
26 if ""%1"" == ""debug"" goto needJavaHome
27 
28 rem Otherwise either JRE or JDK are fine
29 if not "%JRE_HOME%" == "" goto gotJreHome
30 if not "%JAVA_HOME%" == "" goto gotJavaHome
31 echo Neither the JAVA_HOME nor the JRE_HOME environment variable is defined
32 echo At least one of these environment variable is needed to run this program
33 goto exit
34 
35 :needJavaHome
36 rem Check if we have a usable JDK
37 if "%JAVA_HOME%" == "" goto noJavaHome
38 if not exist "%JAVA_HOME%injava.exe" goto noJavaHome
39 if not exist "%JAVA_HOME%injavaw.exe" goto noJavaHome
40 if not exist "%JAVA_HOME%injdb.exe" goto noJavaHome
41 if not exist "%JAVA_HOME%injavac.exe" goto noJavaHome
42 set "JRE_HOME=%JAVA_HOME%"
43 goto okJava
44 
45 :noJavaHome
46 echo The JAVA_HOME environment variable is not defined correctly.
47 echo It is needed to run this program in debug mode.
48 echo NB: JAVA_HOME should point to a JDK not a JRE.
49 goto exit
50 
51 :gotJavaHome
52 rem No JRE given, use JAVA_HOME as JRE_HOME
53 set "JRE_HOME=%JAVA_HOME%"
54 
55 :gotJreHome
56 rem Check if we have a usable JRE
57 if not exist "%JRE_HOME%injava.exe" goto noJreHome
58 if not exist "%JRE_HOME%injavaw.exe" goto noJreHome
59 goto okJava
60 
61 :noJreHome
62 rem Needed at least a JRE
63 echo The JRE_HOME environment variable is not defined correctly
64 echo This environment variable is needed to run this program
65 goto exit
66 
67 :okJava
68 rem Don't override the endorsed dir if the user has set it previously
69 if not "%JAVA_ENDORSED_DIRS%" == "" goto gotEndorseddir
70 rem Set the default -Djava.endorsed.dirs argument
71 set "JAVA_ENDORSED_DIRS=%CATALINA_HOME%endorsed"
72 :gotEndorseddir
73 
74 rem Don't override _RUNJAVA if the user has set it previously
75 if not "%_RUNJAVA%" == "" goto gotRunJava
76 rem Set standard command for invoking Java.
77 rem Also note the quoting as JRE_HOME may contain spaces.
78 set _RUNJAVA="%JRE_HOME%injava.exe"
79 :gotRunJava
80 
81 rem Don't override _RUNJDB if the user has set it previously
82 rem Also note the quoting as JAVA_HOME may contain spaces.
83 if not "%_RUNJDB%" == "" goto gotRunJdb
84 set _RUNJDB="%JAVA_HOME%injdb.exe"
85 :gotRunJdb
86 
87 goto end
88 
89 :exit
90 exit /b 1
91 
92 :end
93 exit /b 0

setclasspath.bat

　　setclasspath.bat比较简单。In debug mode we need a real JDK (JAVA_HOME)，如果没有JRE_HOME和JAVA_HOME，goto exit等等，设置了%JAVA_ENDORSED_DIRS%、%_RUNJAVA%和%_RUNJDB%，执行完毕返回结果0或1。

　　line151　　if errorlevel 1 goto end　　如果setclasspath.bat的结果是1，goto end节点，退出本次批处理。

　　line153~159　　如果有%CLASSPATH%的话，CLASSPATH=";" + %CATALINA_HOME%inootstrap.jar；否则CLASSPATH=%CATALINA_HOME%inootstrap.jar。

rem Add on extra jar file to CLASSPATH
rem Note that there are no quotes as we do not want to introduce random
rem quotes into the CLASSPATH
if "%CLASSPATH%" == "" goto emptyClasspath
set "CLASSPATH=%CLASSPATH%;"
:emptyClasspath
set "CLASSPATH=%CLASSPATH%%CATALINA_HOME%inootstrap.jar"

153~159

　　line161~163　　如果没有%CATALINA_TMPDIR%环境变量的话，设置%CATALINA_TMPDIR%=%CATALINA_BASE% emp。

if not "%CATALINA_TMPDIR%" == "" goto gotTmpdir
set "CATALINA_TMPDIR=%CATALINA_BASE%	emp"
:gotTmpdir

161~163

　　line165~172　　把tomcat-juli.jar写进CLASSPATH里。

rem Add tomcat-juli.jar to classpath
rem tomcat-juli.jar can be over-ridden per instance
if not exist "%CATALINA_BASE%in	omcat-juli.jar" goto juliClasspathHome
set "CLASSPATH=%CLASSPATH%;%CATALINA_BASE%in	omcat-juli.jar"
goto juliClasspathDone
:juliClasspathHome
set "CLASSPATH=%CLASSPATH%;%CATALINA_HOME%in	omcat-juli.jar"
:juliClasspathDone

165~172

　　line174~184　　对日志的处理，给%JAVA_OPTS%加上了%LOGGING_CONFIG% %LOGGING_MANAGER%。

if not "%LOGGING_CONFIG%" == "" goto noJuliConfig
set LOGGING_CONFIG=-Dnop
if not exist "%CATALINA_BASE%conflogging.properties" goto noJuliConfig
set LOGGING_CONFIG=-Djava.util.logging.config.file="%CATALINA_BASE%conflogging.properties"
:noJuliConfig
set "JAVA_OPTS=%JAVA_OPTS% %LOGGING_CONFIG%"

if not "%LOGGING_MANAGER%" == "" goto noJuliManager
set LOGGING_MANAGER=-Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager
:noJuliManager
set "JAVA_OPTS=%JAVA_OPTS% %LOGGING_MANAGER%"

174~184

　　line186　　rem ----- Execute The Requested Command 　　执行请求。

　　line188~190　　输出了CATALINA_BASE、CATALINA_HOME和CATALINA_TMPDIR，从上边可以看出，如果没有设置CATALINA_BASE环境变量的话，CATALINA_BASE=CATALINA_HOME，而CATALINA_TMPDIR=在CATALINA_BASE emp，而CATALINA_HOME就是catalina.bat的目录（startup.bat一般和catalina.bat在一起）。

　　line190~197　　如果第一个参数是debug，输出%JAVA_HOME%；否则输出%JRE_HOME%，输出拼接的%CLASSPATH%。

echo Using CATALINA_BASE:   "%CATALINA_BASE%"
echo Using CATALINA_HOME:   "%CATALINA_HOME%"
echo Using CATALINA_TMPDIR: "%CATALINA_TMPDIR%"
if ""%1"" == ""debug"" goto use_jdk
echo Using JRE_HOME:        "%JRE_HOME%"
goto java_dir_displayed
:use_jdk
echo Using JAVA_HOME:       "%JAVA_HOME%"
:java_dir_displayed
echo Using CLASSPATH:       "%CLASSPATH%"

188~197

　　line199~204　　设置了6个变量。_EXECJAVA=%_RUNJAVA%，%_RUNJAVA%这个环境变量是在setclasspath.bat中设置的，值为%JRE_HOME%injava.exe；MAINCLASS=org.apache.catalina.startup.Bootstrap，这个类在%CATALINA_HOME%inootstarp.jar；ACTION=start；其他3个变量没有赋值。

set _EXECJAVA=%_RUNJAVA%
set MAINCLASS=org.apache.catalina.startup.Bootstrap
set ACTION=start
set SECURITY_POLICY_FILE=
set DEBUG_OPTS=
set JPDA=

199~204

　　line206~221　　是对jdpa的一些操作，搜了一下jdpa的简介，是调试java的api。

if not ""%1"" == ""jpda"" goto noJpda
set JPDA=jpda
if not "%JPDA_TRANSPORT%" == "" goto gotJpdaTransport
set JPDA_TRANSPORT=dt_socket
:gotJpdaTransport
if not "%JPDA_ADDRESS%" == "" goto gotJpdaAddress
set JPDA_ADDRESS=8000
:gotJpdaAddress
if not "%JPDA_SUSPEND%" == "" goto gotJpdaSuspend
set JPDA_SUSPEND=n
:gotJpdaSuspend
if not "%JPDA_OPTS%" == "" goto gotJpdaOpts
set JPDA_OPTS=-agentlib:jdwp=transport=%JPDA_TRANSPORT%,address=%JPDA_ADDRESS%,server=y,suspend=%JPDA_SUSPEND%
:gotJpdaOpts
shift
:noJpda

206~221

　　jdpa简介：

Java平台调试器架构（英语：Java Platform Debugger Architecture，JPDA）是一组用于调试Java代码的API。

Java调试器接口（Java Debugger Interface，JDI）——定义了一个高层次Java接口，开发人员可以利用JDI轻松编写远程调试工具。
Java虚拟机工具接口（Java Virtual Machine Tools Interface，JVMTI）——定义了一个原生（native）接口，可以对运行在Java虚拟机的应用程序检查状态、控制运行。
Java虚拟机调试接口（JVMDI）——JVMDI在J2SE 5.0中被JVMTI取代，并在Java SE 6中被移除。
Java调试线协议（JDWP）——定义了调试对象（一个 Java 应用程序）和调试器进程之间的通信协议。

　　line223~242　　判断catalina.bat的第一个参数，goto 对应的节点。如果第一个参数不是debug、run、start、stop、configtest、version，goto end，本次批处理结束。

if ""%1"" == ""debug"" goto doDebug
if ""%1"" == ""run"" goto doRun
if ""%1"" == ""start"" goto doStart
if ""%1"" == ""stop"" goto doStop
if ""%1"" == ""configtest"" goto doConfigTest
if ""%1"" == ""version"" goto doVersion

echo Usage:  catalina ( commands ... )
echo commands:
echo   debug             Start Catalina in a debugger
echo   debug -security   Debug Catalina with a security manager
echo   jpda start        Start Catalina under JPDA debugger
echo   run               Start Catalina in the current window
echo   run -security     Start in the current window with security manager
echo   start             Start Catalina in a separate window
echo   start -security   Start in a separate window with security manager
echo   stop              Stop Catalina
echo   configtest        Run a basic syntax check on server.xml
echo   version           What version of tomcat are you running?
goto end

223~242

　　line244~252　　doDebug节点

　　line245　　shift　　表示批处理文件中替换参数左移一个位置，后面的替换参数陆续填补上去。

　　line246　　set _EXECJAVA=%_RUNJDB%　　这个变量在line199已经设置过，%_RUNJAVA%这个环境变量是在setclasspath.bat中设置的，值为%JRE_HOME%injava.exe。

　　line247　　set DEBUG_OPTS=-sourcepath "%CATALINA_HOME%....java"　　

　　line248　　if not ""%1"" == ""-security"" goto execCmd　　因为245有一个shift命令，所以此处的%1是catalina.bat启动时的第二个参数。如果%1不是-security的话，goto execCmd节点；否则继续。

　　line249　　shift　　参数再次左移

　　line251　　set "SECURITY_POLICY_FILE=%CATALINA_BASE%confcatalina.policy"　　这个SECURITY_POLICY_FILE赋值。

:doDebug
shift
set _EXECJAVA=%_RUNJDB%
set DEBUG_OPTS=-sourcepath "%CATALINA_HOME%....java"
if not ""%1"" == ""-security"" goto execCmd
shift
echo Using Security Manager
set "SECURITY_POLICY_FILE=%CATALINA_BASE%confcatalina.policy"
goto execCmd

debug节点244~252

　　line254~260　　doRun节点，如果启动时第二个参数是-security，set "SECURITY_POLICY_FILE=%CATALINA_BASE%confcatalina.policy"；否则直接goto execCmd节点。

:doRun
shift
if not ""%1"" == ""-security"" goto execCmd
shift
echo Using Security Manager
set "SECURITY_POLICY_FILE=%CATALINA_BASE%confcatalina.policy"
goto execCmd

dorun节点254~260

　　line262~270　　doStart节点。设置TITLE=TOMCAT，设置_EXECJAVA=start "TOMCAT" %_RUNJAVA%，这样cmd窗口的title会变为“TOMCAT”。如果启动时第二个参数是-security，set "SECURITY_POLICY_FILE=%CATALINA_BASE%confcatalina.policy"；否则直接goto execCmd节点。

:doStart
shift
if "%TITLE%" == "" set TITLE=Tomcat
set _EXECJAVA=start "%TITLE%" %_RUNJAVA%
if not ""%1"" == ""-security"" goto execCmd
shift
echo Using Security Manager
set "SECURITY_POLICY_FILE=%CATALINA_BASE%confcatalina.policy"
goto execCmd

dostart262~270

　　line272~276　　doStop节点，改变ACTION=stop，CATALINA_OPTS=，goto execCmd节点。

:doStop
shift
set ACTION=stop
set CATALINA_OPTS=
goto execCmd

dostop272~270

　　line278~282　　doConfigTest节点，改变ACTION=configtest，CATALINA_OPTS=，goto execCmd节点。

:doConfigTest
shift
set ACTION=configtest
set CATALINA_OPTS=
goto execCmd

doConfigTest278~282

　　line284~286　　doVersion节点，执行line285后goto end节点，本次批处理结束。

　　line285　　%_EXECJAVA% -classpath "%CATALINA_HOME%libcatalina.jar" org.apache.catalina.util.ServerInfo　　等同于java -classpath "*catalina.jar" org.apache.catalina.util.ServerInfo

:doVersion
%_EXECJAVA% -classpath "%CATALINA_HOME%libcatalina.jar" org.apache.catalina.util.ServerInfo
goto end

doVersion284~286

　　反编译后的ServerInfo（片段）:

...
  public static void main(String[] args) {
    System.out.println("Server version: " + getServerInfo());
    System.out.println("Server built:   " + getServerBuilt());
    System.out.println("Server number:  " + getServerNumber());
    System.out.println("OS Name:        " + System.getProperty("os.name"));
    System.out.println("OS Version:     " + System.getProperty("os.version"));
    System.out.println("Architecture:   " + System.getProperty("os.arch"));
    System.out.println("JVM Version:    " + System.getProperty("java.runtime.version"));
    System.out.println("JVM Vendor:     " + System.getProperty("java.vm.vendor"));
  }

　/**
　 * 从ServerInfo.properties读取服务器信息，如果读取失败会有默认返回。
　 */
static {
    Properties props = new Properties();

    InputStream is = null;
    try {
      is = ServerInfo.class.getResourceAsStream("/org/apache/catalina/util/ServerInfo.properties"); // 这个配置文件里只有server.info, server.built, server.number3个属性
      props.load(is);
      serverInfo = props.getProperty("server.info");
      serverBuilt = props.getProperty("server.built");
      serverNumber = props.getProperty("server.number");
    } catch (Throwable t) {
      ExceptionUtils.handleThrowable(t);
    } finally {
      if (is != null)
        try {
          is.close();
        }
        catch (IOException e) {
        }
    }
    if (serverInfo == null)
      serverInfo = "Apache Tomcat 7.0.x-dev";
    if (serverBuilt == null)
      serverBuilt = "unknown";
    if (serverNumber == null)
      serverNumber = "7.0.x";
  }
...

　　line289~297　　execCmd节点，拼接剩余的参数给CMD_LINE_ARGS，和startup.bat中一样。

　　line299~313　　以4种方式之一启动bootstarp.jar，启动后都goto end节点，本次批处理结束，设置的临时环境变量失效。

　　line302　　%_EXECJAVA% %JAVA_OPTS% %CATALINA_OPTS% %DEBUG_OPTS% -Djava.endorsed.dirs="%JAVA_ENDORSED_DIRS%" -classpath "%CLASSPATH%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%　　这种启动方式是没有jdpa和SECURITY_POLICY_FILE的启动。这种模式的%_EXECJAVA%=start "Tomcat" "%JRE_HOME%injava.exe"；%JAVA_OPTS%是line174~184对日志的处理；CATALINA_OPTS=""；%DEBUG_OPTS%=""；%JAVA_ENDORSED_DIRS%在setclasspath.bat设置为%CATALINA_HOME%endorsed；%CLASSPATH%是拼接了bootstrap.jar和tomcat-juli.jar俩个jar包的绝对路径；%MAINCLASS%="org.apache.catalina.startup.Bootstrap"是bootstrap.jar的要启动的main方法所在类；%CMD_LINE_ARGS%是catalina.bat启动时传入参数拼接而成（从第三个参数开始拼接，因为doStart节点的line263和line267有2处shift），一般为空；%ACTION%=start。简言，就是启动了bootstrap.jar，main方法是org.apache.catalina.startup.Bootstrap，参数肯定会有一个start（如果有其他参数，这个会在最后）。

　　line305　　%_EXECJAVA% %JAVA_OPTS% %CATALINA_OPTS% %DEBUG_OPTS% -Djava.endorsed.dirs="%JAVA_ENDORSED_DIRS%" -classpath "%CLASSPATH%" -Djava.security.manager -Djava.security.policy=="%SECURITY_POLICY_FILE%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%　　这种启动方式是没有jdpa但是有SECURITY_POLICY_FILE的启动。比line302多了-Djava.security.policy=="%SECURITY_POLICY_FILE%"，%SECURITY_POLICY_FILE%=%CATALINA_BASE%confcatalina.policy，catalina.policy是大约TOMCAT的权限控制之类。

　　line309　　%_EXECJAVA% %JAVA_OPTS% %JPDA_OPTS% %CATALINA_OPTS% %DEBUG_OPTS% -Djava.endorsed.dirs="%JAVA_ENDORSED_DIRS%" -classpath "%CLASSPATH%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%　　这种启动方式有jdpa无SECURITY_POLICY_FILE，其中%JPDA_OPTS%在line206~221设置。

　　line312　　%_EXECJAVA% %JAVA_OPTS% %JPDA_OPTS% %CATALINA_OPTS% %DEBUG_OPTS% -Djava.endorsed.dirs="%JAVA_ENDORSED_DIRS%" -classpath "%CLASSPATH%" -Djava.security.manager -Djava.security.policy=="%SECURITY_POLICY_FILE%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%　　这种启动方式有jpda和SECURITY_POLICY_FILE

rem Execute Java with the applicable properties
if not "%JPDA%" == "" goto doJpda
if not "%SECURITY_POLICY_FILE%" == "" goto doSecurity
%_EXECJAVA% %JAVA_OPTS% %CATALINA_OPTS% %DEBUG_OPTS% -Djava.endorsed.dirs="%JAVA_ENDORSED_DIRS%" -classpath "%CLASSPATH%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%
goto end
:doSecurity
%_EXECJAVA% %JAVA_OPTS% %CATALINA_OPTS% %DEBUG_OPTS% -Djava.endorsed.dirs="%JAVA_ENDORSED_DIRS%" -classpath "%CLASSPATH%" -Djava.security.manager -Djava.security.policy=="%SECURITY_POLICY_FILE%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%
goto end
:doJpda
if not "%SECURITY_POLICY_FILE%" == "" goto doSecurityJpda
%_EXECJAVA% %JAVA_OPTS% %JPDA_OPTS% %CATALINA_OPTS% %DEBUG_OPTS% -Djava.endorsed.dirs="%JAVA_ENDORSED_DIRS%" -classpath "%CLASSPATH%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%
goto end
:doSecurityJpda
%_EXECJAVA% %JAVA_OPTS% %JPDA_OPTS% %CATALINA_OPTS% %DEBUG_OPTS% -Djava.endorsed.dirs="%JAVA_ENDORSED_DIRS%" -classpath "%CLASSPATH%" -Djava.security.manager -Djava.security.policy=="%SECURITY_POLICY_FILE%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%
goto end

299~313

　　line315　　:end　　end节点。

　　这个批处理比startup.bat复杂的多，tomcat允许我们在%CATALINA_BASE%insetenv.bat设置环境变量，读取%CATALINA_HOME%insetclasspath.bat获取java相关的环境变量，拼接classpath，设置日志相关，设置JPDA_OPTS相关，%CATALINA_BASE%confcatalina.policy的权限控制，如果要查看版本信息，会启动%CATALINA_HOME%libcatalina.jar下的org.apache.catalina.util.ServerInfo等等。最终，也是一般情况（startup.bat启动catalina.bat）会在最后启动bootstrap.jar的org.apache.catalina.startup.Bootstrap类，参数为start。

查看全文

相关阅读:
python之路_socketserver模块
 java 字符串String操作工具类
 maven常用插件
 查杀oracle锁表
 正则表达式汇总
 javascript 数组操作
 javascript中sleep等待实现
 js获取服务端IP及端口及协议
 log4j中的MDC和NDC
如何设置(修改)jetty(maven插件maven-jetty-plugi)的端口

原文地址：https://www.cnblogs.com/yizhishi/p/5936149.html