zoukankan      html  css  js  c++  java
  • poj1459 Power Network (多源多汇最大流)

    Description

    A power network consists of nodes (power stations, consumers and dispatchers) connected by power transport lines. A node u may be supplied with an amount s(u) >= 0 of power, may produce an amount 0 <= p(u) <= p max(u) of power, may consume an amount 0 <= c(u) <= min(s(u),cmax(u)) of power, and may deliver an amount d(u)=s(u)+p(u)-c(u) of power. The following restrictions apply: c(u)=0 for any power station, p(u)=0 for any consumer, and p(u)=c(u)=0 for any dispatcher. There is at most one power transport line (u,v) from a node u to a node v in the net; it transports an amount 0 <= l(u,v) <= l max(u,v) of power delivered by u to v. Let Con=Σ uc(u) be the power consumed in the net. The problem is to compute the maximum value of Con.
    An example is in figure 1. The label x/y of power station u shows that p(u)=x and p max(u)=y. The label x/y of consumer u shows that c(u)=x and c max(u)=y. The label x/y of power transport line (u,v) shows that l(u,v)=x and l max(u,v)=y. The power consumed is Con=6. Notice that there are other possible states of the network but the value of Con cannot exceed 6. 

    Input

    There are several data sets in the input. Each data set encodes a power network. It starts with four integers: 0 <= n <= 100 (nodes), 0 <= np <= n (power stations), 0 <= nc <= n (consumers), and 0 <= m <= n^2 (power transport lines). Follow m data triplets (u,v)z, where u and v are node identifiers (starting from 0) and 0 <= z <= 1000 is the value of l max(u,v). Follow np doublets (u)z, where u is the identifier of a power station and 0 <= z <= 10000 is the value of p max(u). The data set ends with nc doublets (u)z, where u is the identifier of a consumer and 0 <= z <= 10000 is the value of c max(u). All input numbers are integers. Except the (u,v)z triplets and the (u)z doublets, which do not contain white spaces, white spaces can occur freely in input. Input data terminate with an end of file and are correct.

    Output

    For each data set from the input, the program prints on the standard output the maximum amount of power that can be consumed in the corresponding network. Each result has an integral value and is printed from the beginning of a separate line.

    Sample Input

    2 1 1 2 
    (0,1)20 (1,0)10 (0)15 (1)20 7 2 3 13
    (0,0)1 (0,1)2 (0,2)5 (1,0)1 (1,2)8 (2,3)1 (2,4)7 (3,5)2 (3,6)5 (4,2)7 (4,3)5 (4,5)1 (6,0)5 (0)5 (1)2 (3)2 (4)1 (5)4

    Sample Output

    15
    6
    思路:将多源多汇变成一般的最大流问题,套用模板;
    AC代码:
    #include <iostream>
    #include <cstdio>
    #include <cstring>
    #include <algorithm>
    #include <queue>
    using namespace std;
    const int inf=0xffffff;
    const int N=105;
    int cap[N][N],flow[N],path[N];
    queue<int>qu;
    char x;
    int n,m,np,nc,st,ed,co,y,fr;
    int start,ending;
    int bfs()
    {
        while(!qu.empty())qu.pop();
        memset(path,-1,sizeof(path));
        path[start]=0;
        flow[start]=inf;
        qu.push(start);
        while(!qu.empty())
        {
          fr=qu.front();
          qu.pop();
          if(fr==ending)break;
          for(int i=0;i<=n+1;i++)
          {
              if(i!=start&&cap[fr][i]&&path[i]==-1)
              {
                  
                  flow[i]=min(flow[fr],cap[fr][i]);
                  path[i]=fr;
                  qu.push(i);
              }
          }
        }
        if(path[ending]==-1)return -1;
        return flow[ending];
    }
    int maxflow()
    {
        int sumflow=0;
        int step=0,now,pre;
        while(1)
        {
            step=bfs();
            if(step==-1)break;
            sumflow+=step;
            now=ending;
            while(now!=start)
            {
                pre=path[now];
                cap[pre][now]-=step;
                cap[now][pre]+=step;
                now=pre;
            }
        }
        return sumflow;
    }
    int main()
    {
        while(scanf("%d%d%d%d",&n,&np,&nc,&m)!=EOF)
        {
            memset(cap,0,sizeof(cap));
            while(m--)
            {
                cin>>x>>st>>x>>ed>>x>>co;
                cap[st][ed]=co;
            }
            while(np--)
            {
                cin>>x>>y>>x>>co;
                cap[n][y]=co;
            }
            while(nc--)
            {
                cin>>x>>y>>x>>co;
                cap[y][n+1]=co;
            }
            start=n;
            ending=n+1;
            printf("%d
    ",maxflow());
        }
        return 0;
    }



  • 相关阅读:
    cocos2dx错误收集
    lua工具库penlight--06数据(二)
    lua工具库penlight--06数据(一)
    成功解决Developer Express和Janus WinForms Controls中控件的冲突
    NET全控件
    SOA相关资料
    构建高并发高可用的电商平台架构大纲
    让memcached和mysql更好的工作
    《特别推荐》10套精美的免费网站后台管理系统模板
    编写高质量代码:改善C#程序的157个建议
  • 原文地址:https://www.cnblogs.com/zhangchengc919/p/5149597.html
Copyright © 2011-2022 走看看