根据需要调节各总线频率
最下方选项,√去掉,不用实时更新库,选择自己库所在路径就好。
点击左侧,
选择"Code Generator",
选择.c 和 .h文件不分开
最后,点击"GENERATE CODE"生成项目代码。
打开生成的项目代码,如下图所示,进行简要说明
点击编译项目文件(通常"0 Error(s) , 0 Warnning(s)"
请写在USER代码的"***BEGIN***" 和 "***END***"之间写自己的代码,这样修改参数就不会被覆盖自己的代码。