zoukankan      html  css  js  c++  java
  • 路由器基本配置-对话配置模式

    进入初始化配置对话:
    Continue with configuration dialog? [yes/no]: yes
    进入基本管理配置:
    Would you like to enter basic management setup? [yes/no]: yes
    输入路由器的名称:
    Enter host name [Router]: r1
    输入密码(加密显示):
    Enter enable secret: 123456
    输入密码(不加密现实):
    Enter enable password: 123
    输入虚拟终端密码(防止未经授权的用户通过console口以外的口访问路由器):
    Enter virtual terminal password: 123
    是否设置snmp(简单网络管理协议):
    Configure SNMP Network Management? [no]:yes
    输入要设置的接口:
    management network from the above interface summary: fastethernet0/0
    是否为这个端口配置ip:
    Configure IP on this interface? [yes]: yes
    输入ip地址: IP address
    for this interface: 192.168.1.1
    输入网关:
    Subnet mask for this interface [255.255.255.0] : 255.255.0.0 [0] Go to the IOS command prompt without saving this config. [1] Return back to the setup without saving this config. [2] Save this configuration to nvram and exit.
    选择2保存设置 Enter your selection [
    2]: 2 Press RETURN to get started!
  • 相关阅读:
    构建之法阅读笔记01
    软件工程个人作业01
    第一个PSP0级
    java实现课表的增加
    软件工程概论01
    异常处理
    流与文件课件课后作业1计算容量
    第九周课堂测试
    第八周动手动脑
    JAVA项目中常用的异常知识点总结
  • 原文地址:https://www.cnblogs.com/excellencesy/p/8119694.html
Copyright © 2011-2022 走看看