等了快一周了，终于那M1与那外壳一起给我寄过来了。
上午收到，开箱图就不亮了，来一上好电的图！
一同购买来的MSD卡里什么也没有，上电测试时只看到绿色的灯微微亮（这是一个BUG吗！！！！哈哈）。
所以我们要烧写系统，IMG的下载地址是：https://pan.baidu.com/s/1dF7HL0P
我下载了ubuntu和android两个ZIP包。同时也要下载相应的烧写工具。
其中HDDLLF和PhonenixCard是烧写Android必须的，win32diskmager是烧写ubuntu必须的！
按着Wiki上的步骤。
- 将MSD卡插到读卡器，然后再插入到USB上；
- 使用管理员权限运行HDDLLF，然后FORMAT，我这儿使用的标准格式化（很久，要10多分钟）；
- 拔下来读卡器，然后再插入，WIN10会提示说格式化，这里我们格式化成FAT32的（这一步骤速度比较快）；
- 拔下读卡器再插回去，打开PhoenixCard，然后选择盘符，选择img文件（从ZIP解压出来的），选择卡启动，最后点击烧录！（期间这里失败了N回，一度想要换一个WIN7运行或者换一个读卡器测试的，最后在我没有指望的时候居然成功了，成功了！可能是这个软件有问题，对系统或者对读卡器不怎么友好吧。）
- 完成之后，退出然后把卡插到板上去；
这是运行界面。
然后也看了一下设备的输出信息，是这样的：
root@nanopi-h3:/data # HELLO! BOOT0 is starting!
boot0 version : 4.0.0
boot0 commit : 1234567891234567891234567891234567891234
fel_flag = 0x00000000
rtc[0] value = 0x00000000
rtc[1] value = 0x00000000
rtc[2] value = 0x00000000
rtc[3] value = 0x00000000
rtc[4] value = 0x00000000
rtc[5] value = 0x00000000
rtc[6] value = 0x00000000
rtc[7] value = 0x00000000
DRAM DRIVE INFO: V1.3
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
READ DQS LCDL = 00212121
DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
DRAM CLK = 576 MHz
DRAM zq value: 003b3bfb
DRAM dram para1: 10f40400
DRAM dram para2: 00000000
DRAM workmode1: 000009f4
DRAM SIZE =1024 M
odt delay
dram size =1024
card boot number = 0
card no is 0
sdcard 0 line count 4
[mmc]: mmc driver ver 2015-04-13 16:07:39
[mmc]: ***Try SD card 0***
[mmc]: SD/MMC Card: 4bit, capacity: 7680MB
[mmc]: vendor: Man 00125678 Snr 0000001c
[mmc]: product: ASTC[mmc]: revision: 3.4
[mmc]: ***SD/MMC 0 init OK!!!***
sdcard 0 init ok
ERROR! NOT find the head of uboot.
The size of uboot is 000e4000.
sum=114e20d1
src_sum=114e20d1
Succeed in loading uboot from sdmmc flash.
Ready to disable icache.
Jump to secend Boot.
SUNXI_NORMAL_MODE
[ 0.388]e mode
U-Boot 2011.09-rc1 (Jan 21 2017 - 10:11:37) Allwinner Technology
[ 0.395]version: 1.1.0
[ 0.398]uboot commit : 1234567891234567891234567891234567891234
normal mode
[ 0.409]pmbus: ready
not set main pmu id
axp_probe error
gpio value=0x20000
[ 0.447]PMU: pll1 1008 Mhz,PLL6=600 Mhz
AXI=336 Mhz,AHB=200 Mhz, APB1=100 Mhz
sid read already
fel key new mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
normal mode
[ 0.478]DRAM: 1 GiB
relocation Offset is: 35af2000
[box standby] read rtc = 0x0
[box_start_os] mag be start_type no use
user_gpio config
user_gpio ok
gic: normal or no secure os mode
workmode = 0
MMC: 0
[ 0.557][mmc]: mmc driver ver 2015-04-13 14:50:00
[ 0.562][mmc]: get sdc_phy_wipe fail.
[ 0.566][mmc]: get sdc0 sdc_erase fail.
[ 0.570][mmc]: get sdc_f_max fail,use default 50000000Hz
[ 0.575][mmc]: get sdc_ex_dly_used fail,use default dly
[ 0.581][mmc]: SUNXI SD/MMC: 0
[ 0.594][mmc]: *Try SD card 0*
[ 0.627][mmc]: CID 0x12567841 0x53544300 0x34000000 0x1c011213
[ 0.632][mmc]: mmc clk 50000000
[ 0.636][mmc]: SD/MMC Card: 4bit, capacity: 7680MB
[ 0.641][mmc]: boot0 capacity: 0KB,boot1 capacity: 0KB
[ 0.646][mmc]: ***SD/MMC 0 init OK!!!***
[ 0.651][mmc]: erase_grp_size:0x1WrBlk * 0x200 = 0x200 Byte
[ 0.657][mmc]: secure_feature 0x0
[ 0.660][mmc]: secure_removal_type 0x0
[ 0.664]sunxi flash init ok
script config pll_de to 864 Mhz
Not Found clk pll_video1 in script
script config pll_video to 297 Mhz
script config pll_periph0 to 600 Mhz
unable to find regulator vcc-hdmi-18 from [pmu1_regu] or [pmu2_regu]
enable power vcc-hdmi-18, ret=-1
DRV_DISP_Init end
error: open tv_vdid.fex, maybe it is not exist
error: open disp_rsl.fex, maybe it is not exist
error: open disp_rsl.fex, maybe it is not exist
boot_disp.auto_hpd=1
auto hpd check has 0 times!
attched ok, mgr0<-->device0, type=4, mode=4----
ready to set mode
[ 1.556]finally, output_type=0x4, output_mode=0x4, screen_id=0x0, disp_para=0x404
In: serial
Out: serial
Err: serial
--------fastboot partitions--------
-total partitions:14-
-name- -start- -size-
bootloader : 1000000 1000000
env : 2000000 1000000
boot : 3000000 1000000
system : 4000000 30000000
misc : 34000000 1000000
recovery : 35000000 2000000
sysrecovery : 37000000 30000000
private : 67000000 1000000
Reserve0 : 68000000 1000000
klog : 69000000 1000000
Reserve1 : 6a000000 2000000
Reserve2 : 6c000000 1000000
cache : 6d000000 28000000
UDISK : 95000000 0
-----------------------------------
base bootcmd=run setargs_nand boot_normal
bootcmd set setargs_mmc
key 0
cant find rcvy value
cant find fstbt value
misc partition found
to be run cmd=run setargs_mmc boot_normal
[ 1.655][mmc]: MMC Device 2 not found
[ 1.659][mmc]: Can not find mmc dev
[ 1.662][mmc]: read first backup failed in fun sdmmc_secure_storage_read line 1854
sunxi_secstorage_read fail
get secure storage map err
check user data form private
the user data'magic is bad
WORK_MODE_BOOT
adver not need show
sunxi_bmp_logo_display
** Unable to read "bootlogo.bmp" from mmc 0:1 **
sunxi bmp info error : unable to open logo file bootlogo.bmp
[ 1.700]Hit any key to stop autoboot: 0
** Unable to read "script.bin" from mmc 0:2 **
read boot or recovery all
[ 3.349]sunxi flash read :offset 3000000, 13083871 bytes OK
[ 3.358]ready to boot
board_display_setenv: disp_para=404 init_disp=20b0404 tv_vdid=0
[ 3.366][mmc]: MMC Device 2 not found
[ 3.370][mmc]: mmc not find,so not exit
[ 3.374]
Starting kernel ...
[sun8i_fixup]: From boot, get meminfo:
Start: 0x40000000
Size: 1024MB
ion_carveout reserve: 160m@0 300m@0 130m@1 200m@1
ion_reserve_select: ion chipid [0x2c00081!
ion_reserve_common: ion reserve: [0x4d400000, 0x60000000]!
<6[ 0.920544] ls_fetch_sysconfig_para: ls_unused.
[ 0.925952] [RTC] WARNING: Rtc time will be wrong!!
[ 0.931447] [RTC] WARNING: use *internal OSC* as clock source
[ 0.938428] tscdev_init: tsc driver is disabled
[ 0.945243] [cpu_freq] ERR:get cpu extremity frequency from sysconfig failed, use max_freq
[ 0.958221] no red_led, ignore it!
[ 0.965364] sunxi_oops: heming add OOPS_INFO_ADDR = -20
[ 1.501888] ths_fetch_sysconfig_para: type err device_used = 1.
[ 1.515425] init: init proc start
[ 1.574033] init: open path: /dev/bus/usb/001/001
[ 1.721125] init: open path: /dev/bus/usb/002/001
[ 1.742015] init: start e2fsck listening...
[ 1.871101] init: open path: /dev/bus/usb/003/001
[ 2.030976] init: open path: /dev/bus/usb/004/001
[ 2.182833] init: open path: /dev/bus/usb/005/001
[ 2.370982] init: open path: /dev/bus/usb/006/001
[ 2.520945] init: open path: /dev/bus/usb/007/001
[ 2.680958] init: open path: /dev/bus/usb/008/001
[ 3.746718] init: C_IN_START
[ 3.749779] init: path = /dev/block/by-name/cache
[ 4.684496] init: defined DONT_SHOW_INITLOGO
[ 4.689803] init: /sys/class/switch/cvbs/state is not exist
[ 4.692522] init: dont need format /dev/block/by-name/private
[ 4.702361] init: The device is not low memory 1002
[ 4.755242] init: C_IN_START
[ 4.758474] init: path = /dev/block/by-name/UDISK
[ 5.102049] this module is used not!
[ 5.193580] init: get_disp_policy: 1 for modify configs.
[ 5.209403] init: single_display_policy exit@@@@@@
[ 5.223226] Bluetooth: init no bt used in configuration
[ 5.223230]
[ 5.231065] init: untracked pid 102 exited
[ 5.242650] healthd: Could not open /sys/class/power_supply
[ 5.244564] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[ 5.258183] healthd: No charger supplies found
[ 5.321818] android_usb: already disabled
[ 5.326562] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[ 5.337769] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
root@nanopi-h3:/ # [ 22.367490] WRN:L148(drivers/usb/sunxi_usb/manager/usb_hcd_servers.c):ERR: unkown usbc_no(5)
[ 25.594917] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
[ 26.819004] [SPDIF]sunxi-spdif cannot find any using configuration for controllers, return directly!
[ 26.864199] [SPDIF]sndspdif cannot find any using configuration for controllers, return directly!
[ 30.795606] WRN:L88(drivers/usb/sunxi_usb/manager/usb_hcd_servers.c):ERR: unkown usbc_no(5)
上面是别人已经编译好了的IMG文件。
前几天我已经在自己的电脑上成功编译了UBOOT和Linux了，Linux我还没有下载下去，不过UBOOT我下载测试了。
从百度网盘上下载源码。
先格式化一下，然后写到卡上去。
串口输出信息（说明已经下载成功并运行起来了）：
`HELLO! BOOT0 is starting!
boot0 version : 4.0.0
boot0 commit : 1234567891234567891234567891234567891234
fel_flag = 0x00000000
rtc[0] value = 0x00000000
rtc[1] value = 0x00000000
rtc[2] value = 0x00000000
rtc[3] value = 0x00000000
rtc[4] value = 0x00000000
rtc[5] value = 0x00000000
rtc[6] value = 0x00000000
rtc[7] value = 0x00000000
DRAM DRIVE INFO: V1.3
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
READ DQS LCDL = 00212122
DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
DRAM CLK = 576 MHz
DRAM zq value: 003b3bfb
DRAM dram para1: 10f40400
DRAM dram para2: 00000000
DRAM workmode1: 000009f4
DRAM SIZE =1024 M
odt delay
dram size =1024
card boot number = 0
card no is 0
sdcard 0 line count 4
[mmc]: mmc driver ver 2015-04-13 16:07:39
[mmc]: ***Try SD card 0***
[mmc]: SD/MMC Card: 4bit, capacity: 7388MB
[mmc]: vendor: Man 0002544d Snr 148778f1
[mmc]: product: SA08G
[mmc]: revision: 1.4
[mmc]: ***SD/MMC 0 init OK!!!***
sdcard 0 init ok
The size of uboot is 000e4000.
sum=235021d7
src_sum=235021d7
Succeed in loading uboot from sdmmc flash.
Ready to disable icache.
Jump to secend Boot.
SUNXI_NORMAL_MODE
[ 0.402]e mode
U-Boot 2011.09-rc1 (May 17 2017 - 16:08:24) Allwinner Technology
[ 0.410]version: 1.1.0
[ 0.412]uboot commit : 1234567891234567891234567891234567891234
normal mode
[ 0.423]pmbus: ready
not set main pmu id
axp_probe error
gpio value=0x20000
[ 0.461]PMU: pll1 1008 Mhz,PLL6=600 Mhz
AXI=336 Mhz,AHB=200 Mhz, APB1=100 Mhz
sid read already
fel key new mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
normal mode
[ 0.492]DRAM: 1 GiB
relocation Offset is: 35af2000
[box standby] read rtc = 0x0
[box_start_os] mag be start_type no use
user_gpio config
user_gpio ok
gic: normal or no secure os mode
workmode = 0
MMC: 0
[ 0.571][mmc]: mmc driver ver 2015-04-13 14:50:00
[ 0.576][mmc]: get sdc_phy_wipe fail.
[ 0.580][mmc]: get sdc0 sdc_erase fail.
[ 0.584][mmc]: get sdc_f_max fail,use default 50000000Hz
[ 0.589][mmc]: get sdc_ex_dly_used fail,use default dly
[ 0.595][mmc]: SUNXI SD/MMC: 0
[ 0.608][mmc]: *Try SD card 0*
[ 0.641][mmc]: CID 0x2544d53 0x41303847 0x14148778 0xf100f1af
[ 0.646][mmc]: mmc clk 50000000
[ 0.650][mmc]: SD/MMC Card: 4bit, capacity: 7388MB
[ 0.654][mmc]: boot0 capacity: 0KB,boot1 capacity: 0KB
[ 0.660][mmc]: ***SD/MMC 0 init OK!!!***
[ 0.665][mmc]: erase_grp_size:0x1WrBlk * 0x200 = 0x200 Byte
[ 0.670][mmc]: secure_feature 0x0
[ 0.674][mmc]: secure_removal_type 0x0
[ 0.678]sunxi flash init ok
script config pll_de to 864 Mhz
Not Found clk pll_video1 in script
script config pll_video to 297 Mhz
script config pll_periph0 to 600 Mhz
unable to find regulator vcc-hdmi-18 from [pmu1_regu] or [pmu2_regu]
enable power vcc-hdmi-18, ret=-1
DRV_DISP_Init end
[disk_read_fs] no the partition
error: open tv_vdid.fex, maybe it is not exist
[disk_read_fs] no the partition
error: open disp_rsl.fex, maybe it is not exist
[disk_read_fs] no the partition
error: open disp_rsl.fex, maybe it is not exist
boot_disp.auto_hpd=1
auto hpd check has 100 times!
auto check no any connected, the output_type is 4
[ 2.052]finally, output_type=0x4, output_mode=0x4, screen_id=0x0, disp_para=0x0
try to read logic blk 0 without env partition
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
--------fastboot partitions--------
mbr not exist
base bootcmd=run setargs_mmc boot_normal
bootcmd set setargs_mmc
key 0
cant find rcvy value
cant find fstbt value
no misc partition is found
to be run cmd=run setargs_mmc boot_normal
[ 2.100][mmc]: MMC Device 2 not found
[ 2.104][mmc]: Can not find mmc dev
[ 2.108][mmc]: read first backup failed in fun sdmmc_secure_storage_read line 1854
sunxi_secstorage_read fail
get secure storage map err
check user data form private
the private part isn't exist
WORK_MODE_BOOT
adver not need show
sunxi_bmp_logo_display
** Unable to read "bootlogo.bmp" from mmc 0:1 **
sunxi bmp info error : unable to open logo file bootlogo.bmp
[ 2.143]Hit any key to stop autoboot: 0
** Unable to read "boot.img" from mmc 0:1 **
boota: bad boot image magic, maybe not a boot.img?
sunxi#