zoukankan      html  css  js  c++  java
  • FICOON

    https://searchstorage.techtarget.com/definition/FICON

    http://www.ikepu.com/baike/baike_daquan/137278.html

    FICON (for Fiber Connectivity) is a high-speed input/output (I/O) interface for mainframe computer connections to storage devices. As part of IBM's S/390 server, FICON channels increase I/O capacity through the combination of a new architecture and faster physical link rates to make them up to eight times as efficient as ESCON (Enterprise System Connection), IBM's previous fiber optic channel standard.

    1998年和G5服务器一起推出的IBM大型主机通道。它以光纤通道标准为基础,将ESCON的半双工17MB/s传输率提高到了全双工100MB/s。每条FICON通道最高可以支持每秒4000次I/O操作,相当于8条ESCON通道。在距离达到20千米的情况下有100Mbps的双向线路速度,而相对应的在距离达到3千米的情况下ESCON通道只有3Mbps的速度。

    ESCON (Enterprise Systems Connection) is a marketing name for a set of IBM and vendor products that interconnect...

    FICON channel features include:

    • A mapping layer based on the ANSI standard Fibre Channel-Physical and Signaling Interface (FC-PH), which specifies the signal, cabling, and transmission speeds
    • 100 Mbps bi-directional link rates at distances of up to twenty kilometers, compared to the 3Mbps rate of ESCON channels at distances of up to three kilometers.
    • More flexibility in terms of network layout, because of the greater distances
    • Compatibility with any installed channel types on any S/390 G5 server
    • Bridge feature, which enables support of existing ESCON control units
    • Requires only one channel address
    • Support for full-duplex data transfers, which enables simultaneous reading and writing of data over a single link
    • Multiplexing, which enables small data transfers to be transmitted with larger ones, rather than having to wait until the larger transaction is finished

      基于ANSI标准光纤通道-物理和信令接口(FC-PH)的映射层,用于指定信号,电缆和传输速度。

      长达20公里的距离为100 Mbps双向链接速率,而长达3公里的ESCON通道为3 Mbps速率

      在网络规划时期有更大的弹性,因为它能用于更远的距离。

      与在任何S/390G5服务器上的任何设备通道类型都有兼容性。

      桥梁作用,它能支持现有的ESCON控制单位。

      只要求一个通道地址。

      支持同时双向的数据传输,它能同时在一条线上进行数据的读取和写入。

      多路技术,它使少量数据能与另一些大量数据一起被传输,而不必等那些大量数据被传输完。

  • 相关阅读:
    Oracle EXTRACT()函数与to_char() 函数
    Java内部类
    SQL 之 Group By
    Android LayoutInflater布局填充器
    JS 图片转Base64
    C# 事件与委托的区别
    AngularJS的循环输出
    jquery实现button倒计时
    重新理解B/S和C/S的区别
    HashMap与HashTable
  • 原文地址:https://www.cnblogs.com/ytdyz/p/13432309.html
Copyright © 2011-2022 走看看