zoukankan      html  css  js  c++  java
  • Mininet Operations


    http://csie.nqu.edu.tw/smallko/sdn/mininet-operations.htm


    [Descriptions]

     In this lab, I will show how to configure a host as a router. How tostart a dhcp server at a router is also presented. Then I will use iptables tomake a router to own NAT ability. Finally, how to build a GRE tunnels betweentwo local networks is given.

    [First Lab: configure a host as a router]

    h1--h2--h3  (h2 will be configured as a router)

    #!/usr/bin/env python

    from mininet.cli import CLI

    from mininet.net import Mininet

    from mininet.link import Link,TCLink,Intf

    if '__main__' == __name__:

      net = Mininet(link=TCLink)

      h1 = net.addHost('h1')

      h2 = net.addHost('h2')

      h3 = net.addHost('h3')

      Link(h1, h2)

      Link(h2, h3, intfName1='h2-eth1')

      net.build()

      h2.cmd('ifconfig h2-eth0 192.168.10.1 netmask 255.255.255.0')

      h2.cmd('ifconfig h2-eth1 192.168.20.1 netmask 255.255.255.0')

      h2.cmd("echo 1 > /proc/sys/net/ipv4/ip_forward")

      h1.cmd("ifconfig h1-eth0 0")

      h3.cmd("ifconfig h3-eth0 0")

      h1.cmd("ip address add 192.168.10.2/24 dev h1-eth0")

      h1.cmd("ip route add default via 192.168.10.1 dev h1-eth0")

      h3.cmd("ip address add 192.168.20.2/24 dev h3-eth0")

      h3.cmd("ip route add default via 192.168.20.1 dev h3-eth0")

      CLI(net)

      net.stop()

    [Second Lab: start a dhcp server]

    h1--h2--h3  (h2 will be configured as a router.Also, a dhcp server is running at h2.)

    Before theexperiment, use "sudo apt-get install isc-dhcp-server" command toinstall dhcp server in Ubuntu.

    #!/usr/bin/env python

    from mininet.cli import CLI

    from mininet.net import Mininet

    from mininet.link import Link,TCLink,Intf

    if '__main__' == __name__:

      net = Mininet(link=TCLink)

      h1 = net.addHost('h1')

      h2 = net.addHost('h2')

      h3 = net.addHost('h3')

      Link(h1, h2, intfName1='h1-eth0', intfName2='h2-eth0')

      Link(h2, h3, intfName1='h2-eth1', intfName2='h3-eth0')

      net.build()

      h2.cmd('ifconfig h2-eth0 192.168.10.1 netmask 255.255.255.0')

      h2.cmd('ifconfig h2-eth1 192.168.20.1 netmask 255.255.255.0')

      h2.cmd("echo 1 > /proc/sys/net/ipv4/ip_forward")

      h2.cmd("service isc-dhcp-server restart &")

      h1.cmd("ifconfig h1-eth0 0")

      h3.cmd("ifconfig h3-eth0 0")

      h1.cmd("dhclient h1-eth0")

      h3.cmd("dhclient h3-eth0")

      CLI(net)

      net.stop()

    Before running themininet script, we have to configure the dhcp server. Edit the dhcpd.conf under/etc/dhcp

    1

    Running themininet script.

    running thewireshark at h3 to monitor the traffic between h1 and h3.

    From the followingfigure, we can see that the packets are transmitted between h1 (192.168.10.6)and h3 (192.168.20.6)  ---- Note:Different Domains.

    [Third Lab: Add NAT function at h2]

    h1-h2-h3 (h2 will be configured as arouter. Also, use iptables to let h2 have the NAT function)

    #!/usr/bin/env python

    from mininet.cli import CLI

    from mininet.net import Mininet

    from mininet.link import Link,TCLink,Intf

    if '__main__' == __name__:

      net = Mininet(link=TCLink)

      h1 = net.addHost('h1')

      h2 = net.addHost('h2')

      h3 = net.addHost('h3')

      Link(h1, h2, intfName1='h1-eth0', intfName2='h2-eth0')

      Link(h2, h3, intfName1='h2-eth1', intfName2='h3-eth0')

      net.build()

      h2.cmd('ifconfig h2-eth0 192.168.10.1 netmask 255.255.255.0')

      h2.cmd('ifconfig h2-eth1 192.168.20.1 netmask 255.255.255.0')

      h2.cmd("echo 1 > /proc/sys/net/ipv4/ip_forward")

      h2.cmd("iptables -t nat -A POSTROUTING -o h2-eth1 -s 192.168.10.0/24 -j MASQUERADE")

      h2.cmd("service isc-dhcp-server restart &")

      h1.cmd("ifconfig h1-eth0 0")

      h3.cmd("ifconfig h3-eth0 0")

      h1.cmd("dhclient h1-eth0")

      h3.cmd("dhclient h3-eth0")

      CLI(net)

      net.stop()

    running themininet script

    Check thefollowing figure, we can see that h1 can ping h3 successfully. But from the wiresharkwindow, we can see that the source address of packets sent by h1 will bemodified (NAT).

    [Fourth Lab: GREtunnel]

    h1---h2---h3---h4

    h2,h3: router   h1, h4:host

    h1-h2: LAN 1(10.0.0.0/24)

    h3-h4: LAN 2(10.0.1.0/24)

    h2-h3: LAN 3(192.168.10.0/24)

    we will create aGRE tunnel between h2 and h3 (h2 will have a new ip address:10.0.2.1/30 whileh3 will have a new ip address:10.0.2.2/30)

    Note: Without GREtunnel, h1 cannot ping h4.

    #!/usr/bin/env python

    from mininet.cli import CLI

    from mininet.net import Mininet

    from mininet.link import Link,TCLink,Intf

    if '__main__' == __name__:

      net = Mininet(link=TCLink)

      h1 = net.addHost('h1')

      #h2 will be configured as a router

      h2 = net.addHost('h2')

      #h3 will be configured as a router

      h3 = net.addHost('h3')

      h4 = net.addHost('h4')

      Link(h1, h2, intfName1='h1-eth0', intfName2='h2-eth0')

      Link(h2, h3, intfName1='h2-eth1', intfName2='h3-eth0')

      Link(h3, h4, intfName1='h3-eth1', intfName2='h4-eth0')

      net.build()

      h2.cmd('ifconfig h2-eth0 10.0.0.1 netmask 255.255.255.0')

      h2.cmd('ifconfig h2-eth1 192.168.10.1 netmask 255.255.255.0')

      h2.cmd("echo 1 > /proc/sys/net/ipv4/ip_forward")

      h3.cmd('ifconfig h3-eth0 192.168.10.2 netmask 255.255.255.0')

      h3.cmd('ifconfig h3-eth1 10.0.1.1 netmask 255.255.255.0')

      h3.cmd("echo 1 > /proc/sys/net/ipv4/ip_forward")

      h1.cmd("ifconfig h1-eth0 0")

      h4.cmd("ifconfig h4-eth0 0")

      h1.cmd("ip address add 10.0.0.2/24 dev h1-eth0")

      h1.cmd("ip route add default via 10.0.0.1 dev h1-eth0")

      h4.cmd("ip address add 10.0.1.2/24 dev h4-eth0")

      h4.cmd("ip route add default via 10.0.1.1 dev h4-eth0")

      #GRE Tunnel between h2 and h3

      h2.cmd("ip tunnel add tunnel0 mode gre remote 192.168.10.2 local 192.168.10.1 ttl 255")

      h2.cmd("ip link set tunnel0 up mtu 1400")

      h2.cmd("ip addr add 10.0.2.1/30 dev tunnel0")

      h2.cmd("ip route add 10.0.1.0/24 dev tunnel0")

      h3.cmd("ip tunnel add tunnel0 mode gre remote 192.168.10.1 local 192.168.10.2 ttl 255")

      h3.cmd("ip link set tunnel0 up mtu 1400")

      h3.cmd("ip addr add 10.0.2.2/30 dev tunnel0")

      h3.cmd("ip route add 10.0.0.0/24 dev tunnel0")

      CLI(net)

      net.stop()

    Test 1: mark thered lines above.

    Test 2: With GREtunnel between h2 and h3

    Now, h1 can pingh4.

      

    Dr. Chih-Heng Ke

    Department of Computer Science and InformationEngineering, National Quemoy University, Kinmen, Taiwan

    Email: smallko@gmail.com


  • 相关阅读:
    cocos2dx中的精灵CCSprite
    Mark Russinovich 的博客:Windows Azure 主机更新:原因、时间和方式
    cocos2d-x中的尺寸之三
    cocos2d-x中的尺寸之二
    cocos2d-x中的尺寸之一
    cocos2d-x中的导演、场景、层和精灵
    宣布正式发布 Windows Azure 上的 Oracle 软件以及 Windows Azure Traffic Manager 更新
    Hello China操作系统STM32移植指南(三)
    Hello China操作系统STM32移植指南(二)
    diff_mysql_table_exec.py
  • 原文地址:https://www.cnblogs.com/ztguang/p/12644957.html
Copyright © 2011-2022 走看看