CentOS6.3如果在安装的时候所有安装选项都打勾的话就含有单间vsftpd必备的软件：vsftpd、pam*、db4*
检查是否安装：
[root@centos6 ~]# rpm -qa | grep vsftpd vsftpd-2.2.2-11.el6_4.1.x86_64
[root@centos6 ~]# rpm -qa | grep db4 db4-4.7.25-18.el6_4.x86_64 db4-java-4.7.25-18.el6_4.x86_64 db4-utils-4.7.25-18.el6_4.x86_64 db4-devel-static-4.7.25-18.el6_4.x86_64 db4-cxx-4.7.25-18.el6_4.x86_64 compat-db43-4.3.29-15.el6.x86_64 db4-devel-4.7.25-18.el6_4.x86_64 compat-db42-4.2.52-15.el6.x86_64 db4-tcl-4.7.25-18.el6_4.x86_64 [root@centos6 ~]# rpm -qa | grep pam pam_krb5-2.3.11-9.el6.x86_64 pam-devel-1.1.1-17.el6.x86_64 nss-pam-ldapd-0.7.5-18.el6.x86_64 pam_passwdqc-1.0.5-6.el6.x86_64 gnome-keyring-pam-2.28.2-8.el6_3.x86_64 pam_pkcs11-0.6.2-12.1.el6.x86_64 pam_ssh_agent_auth-0.9.3-94.el6.x86_64 pam-1.1.1-17.el6.x86_64 fprintd-pam-0.1-20.git04fd09cfa.el6.x86_64 pam_ldap-185-11.el6.x86_64
如果没有安装则选择：yum install vsftpd pam* db4* -y
下面我们开始配置我们的ftp：
一、建立系统账户
1.建立Vsftpd服务的宿主用户：
[root@centos6 ~]# useradd vsftpd -s /sbin/nologin
2.建立Vsftpd虚拟宿主用户：
[root@centos6 ~]# useradd ftp -s /sbin/nologin
二、配置vsftpd的配置文件/etc/vsftpd/vsftpd.conf
1.备份配置文件
[root@centos6 ~]# cp /etc/vsftpd/vsftpd.conf /etc/vsftpd/vsftpd.conf.backup
2.修改配置文件
[root@centos6 ~]# vi /etc/vsftpd/vsftpd.conf
# Example config file /etc/vsftpd/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # Allow anonymous FTP? (Beware - allowed by default if you comment this out). anonymous_enable=NO # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. anon_upload_enable=NO # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. anon_mkdir_write_enable=NO # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # The target log file can be vsftpd_log_file or xferlog_file. # This depends on setting xferlog_std_format parameter xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! chown_uploads=NO #chown_username=whoever # # The name of log file when xferlog_enable=YES and xferlog_std_format=YES # WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log xferlog_file=/var/log/vsftpd.log # # Switches between logging into vsftpd_log_file and xferlog_file files. # NO writes to vsftpd_log_file, YES to xferlog_file xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. nopriv_user=vsftpd # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. ascii_upload_enable=YES ascii_download_enable=YES # # You may fully customise the login banner string: ftpd_banner=Welcome to blah FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd/banned_emails # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_local_user=YES chroot_list_enable=NO # (default follows) #chroot_list_file=/etc/vsftpd/chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. ls_recurse_enable=NO # # When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=YES # # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd with two configuration files. # Make sure, that one of the listen options is commented !! #listen_ipv6=YES pam_service_name=vsftpd pasv_enable=YES pasv_min_port=10000 pasv_max_port=10010 userlist_enable=YES tcp_wrappers=YES guest_enable=YES guest_username=ftp virtual_use_local_privs=YES user_config_dir=/etc/vsftpd/vconf use_localtime=YES
3.建立vsftpd日志文件，并更该属主为vsftpd的服务宿主用户：
[root@centos6 ~]# touch /var/log/vsftpd.log [root@centos6 ~]# chown vsftpd.vsftpd /var/log/vsftpd.log [root@centos6 ~]#
4.建立虚拟用户配置文件存放路径：
[root@centos6 ~]# mkdir /etc/vsftpd/vconf/
三、建立生成虚拟用户数据库文件
1.先建立虚拟用户名单文件：
[root@centos6 ~]# touch /etc/vsftpd/virtusers
建立虚拟用户名单文件，这个文件用来记录vsftpd虚拟用户的用户名和口令的数据文件，这里为其命名为virtusers。为避免文件混乱，我将这个名单文件就放置在/etc/vsftpd/下。
2.编辑虚拟用户名单文件：
[root@centos6 ~]# vi /etc/vsftpd/virtuser
admin
admin123456
编辑这个虚拟用户名单文件，在其中加入用户的用户名和口令信息。格式很简单：“一行用户名，一行口令”。
3.生成虚拟用户数据文件：
[root@centos6 ~]# db_load -T -t hash -f /etc/vsftpd/virtusers /etc/vsftpd/virtusers.db
四.设定PAM验证文件，并指定虚拟用户数据库文件进行读取
1.备份/etc/pam.d/vsftpd
[root@centos6 ~]# cp /etc/pam.d/vsftpd /etc/pam.d/vsftpd.backup
2.编辑vsftpd的PAM验证配置文件，加入如下两行
#%PAM-1.0 auth sufficient /lib64/security/pam_userdb.so db=/etc/vsftpd/virtusers #如果是32bit机器，此处为lib account sufficient /lib64/security/pam_userdb.so db=/etc/vsftpd/virtusers
五、虚拟用户配置
1.建立虚拟用户主路径：
[root@centos6 ~]# mkdir /opt/vsftp/
2.建立admin用户的FTP用户目录：
[root@centos6 ~]# mkdir /opt/vsftp/admin/
3.建立虚拟用户配置文件模版：
[root@centos6 ~]# cp /etc/vsftpd/vsftpd.conf.backup /etc/vsftpd/vconf/vconf.tmp
4.定制虚拟用户模版配置文件：
[root@centos6 ~]# vi /etc/vsftpd/vconf/vconf.tmp
一下仅作为各位参考：
local_root=/opt/vsftp/virtuser #指定虚拟用户的具体主路径。 anonymous_enable=NO #设定不允许匿名用户访问。 write_enable=YES #设定允许写操作。 local_umask=022 #设定上传文件权限掩码。 anon_upload_enable=NO #设定不允许匿名用户上传。 anon_mkdir_write_enable=NO #设定不允许匿名用户建立目录。 idle_session_timeout=600 #设定空闲连接超时时间。 data_connection_timeout=120 #设定单次连续传输最大时间。 max_clients=10 #设定并发客户端访问个数。 max_per_ip=5 #设定单个客户端的最大线程数，这个配置主要来照顾Flashget、迅雷等多线程下载软件。 local_max_rate=50000 #设定该用户的最大传输速率，单位b/s。
这里将原vsftpd.conf配置文件经过简化后保存作为虚拟用户配置文件的模版。这里将并不需要指定太多的配置内容，主要的框架和限制交由 Vsftpd的主配置文件vsftpd.conf来定义，即虚拟用户配置文件当中没有提到的配置项目将参考主配置文件中的设定。而在这里作为虚拟用户的配置文件模版只需要留一些和用户流量控制，访问方式控制的配置项目就可以了。这里的关键项是local_root这个配置，用来指定这个虚拟用户的FTP主路径。
5.更改虚拟用户的主目录的属主为虚拟宿主用户：
[root@centos6 ~]# chown -R ftp.ftp /opt/vsftp/
6.检查权限：
[root@centos6 ~]# ll /opt/vsftp/ total 4 drwxrwxrwx. 3 ftp ftp 4096 Apr 14 08:53 admin
六、给测试用户定制：
1.从虚拟用户模版配置文件复制：
[root@centos6 ~]# cp /etc/vsftpd/vconf/vconf.tmp /etc/vsftpd/vconf/admin
2.针对具体用户进行定制：
[root@centos6 ~]# vi /etc/vsftpd/vconf/admin
local_root=/opt/vsftp/kanecruise anonymous_enable=NO write_enable=YES local_umask=022 anon_upload_enable=NO anon_mkdir_write_enable=NO idle_session_timeout=300 data_connection_timeout=90 max_clients=1 max_per_ip=1 local_max_rate=88000
七、关闭selinux设置其为disabled
八、配置防火墙
1.实现确定在vsftpd配置文件中加入：
pasv_enable=YES pasv_min_port=10000 pasv_max_port=10010
2.在iptables中加入：
-A INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 10000:10010 -j ACCEPT
3.重启iptables
[root@centos6 ~]# /etc/init.d/iptables restart
八、重启服务
[root@centos6 ~]# /etc/init.d/vsftpd restart
九、Windows测试连接、下载、上传
1.cmd下测试
C:UsersRichard>ftp ftp> open 10.100.52.215 连接到 10.100.52.215。 220 Welcome to blah FTP service. 用户(10.100.52.215:(none)): admin 331 Please specify the password. 密码: 230 Login successful. ftp> ls 200 PORT command successful. Consider using PASV. 150 Here comes the directory listing. Android Books C# Database Java ModelingTools Office VersionControl 226 Directory send OK. ftp: 收到 75 字节，用时 0.00秒 75000.00千字节/秒。 ftp>
2.Windows资源管理器测试，成功。