zoukankan      html  css  js  c++  java
  • 网络配置br0 brtcl

    1、brctl addbr br0        如果根据第3步,那这里不用写

    2、brctl addif br0 eth0    如果第3步写了,这里也不用 这时候用ssh应该会断网。。。

    3、设置interfaces

    # This file describes the network interfaces available on your system
    # and how to activate them. For more information, see interfaces(5).
    
    # The loopback network interface
    auto lo
    iface lo inet loopback
    
    auto br0
    allow-hotplug br0
    iface br0 inet static
        address 192.168.7.64
        netmask 255.255.255.0
        gateway 192.168.7.254
        bridge_ports eth0
    
    
    # The primary network interface
    # This is an autoconfigured IPv6 interface
    #allow-hotplug eth0
    #iface eth0 inet6 auto
    #auto  eth0
    #iface eth0 inet static
    #    address 192.168.7.64
    #    netmask 255.255.255.0
    #    gateway 192.168.7.254
    

      

    4、ifconfig eth0 0.0.0.0   去掉eth0的设置

    5、# ifconfig br0 192.168.1.1       由于已经在interfaces里设置,所以这里应该不用再设置了

    6、重启网络 ok

  • 相关阅读:
    浏览器内核
    手机端开发适配问题
    关于样式的问题
    nginx和uwsgi的区别和作用
    Flask (七) 部署
    Flask (六) 项目(淘票票)
    Flask (五) RESTful API
    Flask (四) 模型进阶
    Flask (三) 数据迁移
    Flask (二) cookie 与 session 模型
  • 原文地址:https://www.cnblogs.com/juandx/p/3997492.html
Copyright © 2011-2022 走看看